Shaping plasmon beams via the controlled illumination of finite-size plasmonic crystals

Plasmonic crystals provide many passive and active optical functionalities, including enhanced sensing, optical nonlinearities, light extraction from LEDs and coupling to and from subwavelength waveguides. Here we study, both experimentally and numerically, the coherent control of SPP beam excitation in finite size plasmonic crystals under focussed illumination. The correct combination of the illuminating spot size, its position relative to the plasmonic crystal, wavelength and polarisation enables the efficient shaping and directionality of SPP beam launching. We show that under strongly focussed illumination, the illuminated part of the crystal acts as an antenna, launching surface plasmon waves which are subsequently filtered by the surrounding periodic lattice. Changing the illumination conditions provides rich opportunities to engineer the SPP emission pattern. This offers an alternative technique to actively modulate and control plasmonic signals, either via micro- and nano-electromechanical switches or with electro- and all-optical beam steering which have direct implications for the development of new integrated nanophotonic devices, such as plasmonic couplers and switches and on-chip signal demultiplexing. This approach can be generalised to all kinds of surface waves, either for the coupling and discrimination of light in planar dielectric waveguides or the generation and control of non-diffractive SPP beams

Broadband and broadangle SPP antennas based on plasmonic crystals with linear chirp

Plasmonic technology relies on the coupling of light to surface electromagnetic modes on smooth or structured metal surfaces. While some applications utilise the resonant nature of surface polaritons, others require broadband characteristics. We demonstrate unidirectional and broadband plasmonic antennas with large acceptance angles based on chirped plasmonic gratings. Near-field optical measurements have been used to visualise the excitation of surface plasmon polaritons by such aperiodic structures. These weakly aperiodic plasmonic crystals allow the formation of a trapped rainbow-type effect in a two-dimensional geometry as surface polaritons of different frequencies are coherently excited in different locations over the plasmonic structure. Both the crystal's finite size and the finite lifetime of plasmonic states are crucial for the generation of broadband surface plasmon polaritons. This approach presents new opportunities for building unidirectional, broadband and broad-angle plasmonic couplers for sensing purposes, information processing, photovoltaic applications and shaping and manipulating ultrashort optical pulses. © 2012 Macmillan Publishers Limited. All rights reserved

Adsorption trajectories of nonspherical particles at liquid interfaces

The adsorption of colloidal particles at liquid interfaces is of great importance scientifically and industrially, but the dynamics of the adsorption process is still poorly understood. In this paper we use a Langevin model to study the adsorption dynamics of ellipsoidal colloids at a liquid interface. Interfacial deformations are included by coupling our Langevin dynamics to a finite element model while transient contact line pinning due to nanoscale defects on the particle surface is encoded into our model by renormalizing particle friction coefficients and using dynamic contact angles relevant to the adsorption timescale. Our simple model reproduces the monotonic variation of particle orientation with time that is observed experimentally and is also able to quantitatively model the adsorption dynamics for some experimental ellipsoidal systems but not others. However, even for the latter case, our model accurately captures the adsorption trajectory (i.e., particle orientation versus height) of the particles. Our study clarifies the subtle interplay between capillary, viscous, and contact line forces in determining the wetting dynamics of micron-scale objects, allowing us to design more efficient assembly processes for complex particles at liquid interfaces

Using adsorption kinetics to assemble vertically aligned nanorods at liquid interfaces for metamaterial applications

Vertically aligned monolayers of metallic nanorods have a wide range of applications as metamaterials or in surface enhanced Raman spectroscopy. However the fabrication of such structures using current top-down methods or through assembly on solid substrates is either difficult to scale up or have limited possibilities for further modification after assembly. The aim of this paper is to use the adsorption kinetics of cylindrical nanorods at a liquid interface as a novel route for assembling vertically aligned nanorod arrays that overcomes these problems. Specifically, we model the adsorption kinetics of the particle using Langevin dynamics coupled to a finite element model, accurately capturing the deformation of the liquid meniscus and particle friction coefficients during adsorption. We find that the final orientation of the cylindrical nanorod is determined by their initial attack angle when they contact the liquid interface, and that the range of attack angles leading to the end-on state is maximised when nanorods approach the liquid interface from the bulk phase that is more energetically favorable. In the absence of an external field, only a fraction of adsorbing nanorods end up in the end-on state (<=40% even for nanorods approaching from the energetically favourable phase). However, by pre-aligning the metallic nanorods with experimentally achievable electric fields, this fraction can be effectively increased to 100%. Using nanophotonic calculations, we also demonstrate that the resultant vertically aligned structures can be used as epsilon-near-zero and hyperbolic metamaterials. Our kinetic assembly method is applicable to nanorods with a range of diameters, aspect ratios and materials and therefore represents a versatile, low-cost and powerful platform for fabricating vertically aligned nanorods for metamaterial applications

Magnetic control of MOF crystal orientation and alignment

Most metal-organic frameworks (MOFs) possess anisotropic properties, the full exploitation of which necessitates a general strategy for the controllable orientation of such MOF crystals. Current methods largely rely upon layer-by-layer MOF epitaxy or tuning of MOF crystal growth on appropriate substrates, yielding MOFs with fixed crystal orientations. Here, the dynamic magnetic alignment of different MOF crystals (NH2-MIL-53(Al) and NU-1000) is shown. The MOFs were magnetized by electrostatic adsorption of iron oxide nanoparticles, dispersed in curable polymer resins (Formlabs 1+ clear resin/ Sylgard 184), magnetically oriented, and fixed by resin curing. The importance of crystal orientation on MOF functionality was demonstrated whereby magnetically aligned NU-1000/Sylgard 184 composite was excited with linearly polarized 405 nm light, affording an anisotropic fluorescence response dependent on the polarization angle of the excitation beam relative to NU-1000 crystal orientation

Conjugated, rod-like viologen oligomers: correlation of oligomer length with conductivity and photoconductivity

An iterative synthesis has been used to produce conjugated, monodisperse, viologen-based aromatic oligomers containing up to 12 aromatic/heterocyclic rings. The methoxy-substituted oligomers were soluble in common organic solvents and could be processed by spin coating. The conductivities of the resulting films (30 to 221 nm thick) increased by more than an order of magnitude as the oligomer length increased from unimer (1, 2.20×10-11 S cm-1) through dimer (2) to trimer (3, 6.87×10-10 S cm-1). The bandgaps of the materials were estimated from the absorption spectra of these thin films. The longest oligomer, 3, exhibited a noticeably narrower bandgap (2.3 eV) than the shorter oligomers (1 and 2 both 2.7 eV). Oligomer 3 also showed photoconductivity under irradiation across a wide range of wavelengths in the visible spectral region. In conjunction with DFT calculations of these systems our results suggest that structurally related viologen-type oligomers may find use in optoelectronic devices

Epidemiology and pathophysiology of cancer-associated thrombosis

Venous thromboembolism (VTE) is a common complication in patients with malignant disease. First recognised by Bouillard in 1823 and later described by Trousseau in 1844, multiple studies have since provided considerable evidence for a clinical association between VTE and cancer. Across all cancers, the risk for VTE is elevated 7-fold; in certain malignancies, the risk for VTE may be increased up to 28-fold. Venous thromboembolism is the second leading cause of death in patients with cancer; among survivors, complications commonly include recurrent VTE and post-thrombotic syndrome, and (more rarely) chronic thromboembolic pulmonary hypertension, which are costly, and have a profound impact on the patient's quality of life. Tumour cells can activate blood coagulation through multiple mechanisms, including production of procoagulant, fibrinolytic, and proaggregating activities, release of proinflammatory and proangiogenic cytokines, and interacting directly with host vascular and blood cells (e.g., endothelial cells, leukocytes, and platelets) through adhesion molecules. Increasing evidence suggests that elements of the haemostatic system also have a direct role in eliciting or enhancing angiogenesis, cell survival, and metastasis. Despite the problem posed by VTE in the setting of cancer, it is evident that a significant number of oncologists do not recognise the link between cancer, its treatment, and thrombogenesis. On 22 May 2009, a group of UK-based physicians met in London, UK, to evaluate recent data on cancer thrombosis. This article (1 of 4) briefly reviews key data on the epidemiology and pathophysiology of VTE as a context for a discussion and consensus statement developed by meeting attendees, on the implications of this information for UK clinical practice

From photoinduced to dark cytotoxicity via an octahedral cluster hydrolysis

Octahedral molybdenum and tungsten clusters have potential biological applications in photodynamic therapy and bioimaging. However, poor solubility and hydrolysis stability of these compounds hinder their application. The first water-soluble photoluminescent octahedral tungsten cluster [{W6I8}(DMSO)6](NO3)4 was synthesised and demonstrated to be at least one order of magnitude more stable towards hydrolysis than its molybdenum analogue. Biological studies of the compound on larynx carcinoma cells suggest that it has a significant photoinduced toxicity, while the dark toxicity increases with the increase of the degree of hydrolysis. The increase of the dark toxicity is associated with the in situ generation of nanoparticles that clog up the cisternae of rough endoplasmic reticulum

Optical transmission of periodic annular apertures in metal film on high-refractive index substrate: The role of the nanopillar shape

4 páginas, 4 figuras.-- et al.The influence of annular aperture parameters on the optical transmission through arrays of coaxial apertures in a metal film on high refractive index substrates has been investigated experimentally and numerically. It is shown that the transmission resonances are related to plasmonic crystal effects rather than frequency cutoff behavior associated with annular apertures. The role of deviations from ideal aperture shape occurring during the fabrication process has also been studied. Annular aperture arrays are often considered in many applications for achieving high optical transmission through metal films and understanding of nanofabrication tolerances are important.This work was supported in part by EPSRC (UK) and EC FP6 STREP PLEAS: Plasmon Enhanced Photonics. SGR, SCP, LMM, and FJGV would like to acknowledge support from the Spanish Ministry of Science under Project No. MAT2008-06609-C02.Peer reviewe