Study of effective transport properties of fresh and aged gas diffusion layers

Gas diffusion layers (GDLs) play an important role in proton exchange membrane fuel cells (PEMFCs) for the diffusion of reactant and the removal of product water. In the current study fresh and aged GDLs (Sigracet® GDL34BC) were investigated by X-ray computed tomography to obtain a representative 3D image of the real GDL structure. The examined GDL samples are taken from areas located under the flow channel and under the land. Additionally, a brand new Sigracet® GDL34BC was taken as a reference sample in order to find out the impact of fuel cell assembly on GDL. The produced 3D image data were used to calculate effective transport properties such as thermal and electrical conductivity, diffusivity, permeability and capillary pressure curves of the dry and partially saturated GDL. The simulation indicates flooding by product water occurs at contact angles lower than 125° depending on sample porosity. In addition, GDL anisotropy significantly affects the permeability as well as thermal and electrical conductivities. The calculated material bulk properties could be next used as input for CFD modelling of PEM fuel cells where GDL is usually assumed layer-like and homogeneous. Tensor material parameters allow to consider GDL anisotropy and lead to more realistic results.JRC.F.2-Energy Conversion and Storage Technologie

Gas flow field with obstacles for PEM fuel cells at different operating conditions

In proton exchange membrane fuel cells (PEMFCs) laminar flow inside anode and cathode gas channels can be disrupted by using obstacles. By arranging these obstacles near to the exit of the gas channels concentration losses due to hydrogen and oxygen consumption inside the channel will be decreased. Using a three dimensional computational model, numerical simulations are performed to investigate performance of PEMFCs containing obstacles in the anode and cathode gas flow channels. These simulations were conducted at different operating conditions (stoichiometry, relative humidity and temperature) to clarify the effects of the obstacles at specified conditions. The simulations show that the obstacles inside the gas flow channels improve the concentration distribution along the channels and the transport of the reactant gases through the gas diffusion layer (GDL). As a result, the electrochemical reaction is improved and higher cell voltage is obtained at high current densities.JRC.F.2-Energy Conversion and Storage Technologie

Methods for Natural and Synthetic Polymers Recovery from Textile Waste

Trends in the textile industry show a continuous increase in the production and sale of textile materials, which in turn generates a huge amount of discarded clothing every year. This has a negative impact on the environment, on one side, by consuming resources—some of them non-renewables (to produce synthetic polymers)—and on the other side, by polluting the environment through the emission of GHGs (greenhouse gases), the generation of microplastics, and the release of toxic chemicals in the environment (dyes, chemical reagents, etc.). When natural polymers (e.g., cellulose, protein fibers) are used for the manufacturing of clothes, the negative impact is transferred to soil pollution (e.g., by using pesticides, fertilizers). In addition, for the manufacture of clothes from natural fibers, large amounts of water are consumed for irrigation. According to the European Environment Agency (EEA), the consumption of clothing is expected to increase by 63%, from 62 million tonnes in 2019 to 102 million tonnes in 2030. The current article aims to review the latest technologies that are suitable for better disposal of large quantities of textile waste

Oxidative coupling of methane in a catalytic membrane reactor: Impact of the catalyst-membrane interaction on the reactor performance.

International audienc

Oxidative coupling of methane in a catalytic membrane reactor: Impact of the catalyst-membrane interaction on the performance of reactor

internationalInternational audienc

Composite Polymers from Leather Waste to Produce Smart Fertilizers

The leather industry is facing important environmental issues related to waste disposal. The waste generated during the tanning process is an important resource of protein (mainly collagen) which can be extracted and reused in different applications (e.g., medical, agricultural, leather industry). On the other side, the utilization of chemical fertilizers must be decreased because of the negative effects associated to an extensive use of conventional chemical fertilizers. This review presents current research trends, challenges and future perspectives with respect to the use of hide waste to produce composite polymers that are further transformed in smart fertilizers. Hide waste contains mostly protein (collagen that is a natural polymer), that is extracted to be used in the cross-linking with water soluble copolymers to obtain the hydrogels which are further valorised as smart fertilizers. Smart fertilizers are a new class of fertilizers which allow the controlled release of the nutrients in synchronization with the plant’s demands. Characteristics of hide and leather wastes are pointed out. The fabrication methods of smart fertilizers and the mechanisms for the nutrients release are extensively discussed. This novel method is in agreement with the circular economy concepts and solves, on one side, the problem of hide waste disposal, and on the other side produces smart fertilizers that can successfully replace conventional chemical fertilizers

Review of Soil Quality Improvement Using Biopolymers from Leather Waste

This paper reviews the advantages and disadvantages of the use of fertilizers obtained from leather waste, to ameliorate the agricultural soil quality. The use of leather waste (hides and skins) as raw materials to obtain biopolymer-based fertilizers is an excellent example of a circular economy. This allows the recovery of a large quantity of the tanning agent in the case of tanned wastes, as well as the valorization of significant quantities of waste that would be otherwise disposed of by landfilling. The composition of organic biopolymers obtained from leather waste is a rich source of macronutrients (nitrogen, calcium, magnesium, sodium, potassium), and micronutrients (boron, chloride, copper, iron, manganese, molybdenum, nickel and zinc), necessary to improve the composition of agricultural soils, and to remediate the degraded soils. This enhances plant growth ensuring better crops. The nutrient release tests have demonstrated that, by using the biofertilizers with collagen or with collagen cross-linked with synthetic polymers, the nutrient release can be controlled and slowed. In this case, the loss of nutrients by leaching into the inferior layers of the soil and ground water is minimized, avoiding groundwater contamination, especially with nitrate

Evaluation of Phenobarbital Adsorption Efficiency on Biosorbents or Activated Carbon Obtained from Adansonia Digitata Shells

The removal of pharmaceutically active compounds present in relatively low concentration in wastewater is critical. This is because they have a severe, negative impact on life and the environment. To address this issue, adsorption was used, which is an effective wastewater treatment method for removing substances found in low concentrations in water. This study compared the adsorption performance of active carbon to three biosorbents derived from Adansonia digitata shells. The adsorbents were prepared and characterized using TGA, SEM, EDX, and FTIR analyses and pHPZC. To better understand the adsorption process, equilibrium and reaction kinetics studies were conducted. The effect of contact time, initial phenobarbital concentration, adsorbent mass, and pH was investigated in static conditions. The adsorption results revealed that the biosorbent B3 has a higher affinity for the eliminated compound, with an equilibrium time of 60 min and an adsorption capacity of 47.08 mg/g at an initial concentration of 50 mg/L. The experimental data are consistent with Langmuir and Sips adsorption isotherm models, and with the pseudo-second order and Elovich models for kinetics description. This indicates strong interactions between the adsorbent materials and the pharmaceutical micropollutant. Based on these findings, it appears that, among the tested materials, B3 biosorbent is the most efficient for removing phenobarbital present in low concentrations in water