Philosophical and epistemological debate in Italy within an ethical perspective of Earth sciences

During the recent "Geoitalia" national congress, the Italian scientific community tackled questions concerning the philosophy and sociology of Earth Sciences. The topics discussed and reported in this article were: the overall identity of E.S.; the validation procedures of data, theories and models; the power of attraction exerted by the philosophy of physics - exact science par excellence - with respect to E.S

A meta-analytical approach for evaluating the effect of arginine supplementation on the productive performance of sows during gestation

Arginine (Arg) supplementation for gestating and lactating sows seems to play a primary role in litter development by promoting placental vascularization and improving colostrum and milk quality. The aim of this study was to investigate the effects of the supplementation of dietary standardized ileal digestible Arg (SID Arg) on the productive performance of gestating sows using a meta-analytical approach. A total of 19 studies conducted between 2007 and 2020 which tested the effect of additional SID Arg supplementation in diets for sows were chosen using a systematic literature search. Data regarding backfat thickness, number of piglets born and live born, litter birthweight and weaning weight were extrapolated from each experimental group and expressed as a percentage of the value of the control group within the studies. The SID Arg supplementation was expressed as the percentage of SID Arg in the treated group compared to the control group (Additional SID Arg). Linear and quadratic models were built using a mixed procedure utilizing Minitab® software including Additional SID Arg, parity and feed intake classes and the period of SID Arg supplementation as fixed factors, and the study as the random factor. The SID Arg in control groups was higher than the doses suggested by the National Research Council (NRC; 2012) (4.20–8.90 g/kg of feed vs 3.2–7.9 g/kg, respectively). A quadratic response of Additional SID Arg was observed for placental efficiency (PE; P = 0.003; a=0.0019), the number of total piglets born (P = 0.027; a=−0.0003), the number of live born piglets (P = 0.005; a=−0.0006) and backfat thickness loss (P = 0.057; a=0.0029). A linear increase in the plasma concentration of Pro (P = 0.004; b=0.120), Orn (P = 0.002; b=0.284) and Arg (P = 0.001; b=0.425), and a decrease in the concentration of urea (P = 0.037; b=−0.063) was observed with an increasing level of SID Arg. There was no effect on placenta weight, live litter birthweight, individual piglet weight at birth and weaning, litter size and weight at weaning, and average daily gain during lactation. The estimated requirements of SID Arg for improving PE, reducing backfat thickness loss, increasing the number of piglets born and live born were 11.17 g/kg, 13.03 g/kg, 14.83 g/kg and 15.71 g/kg of feed, respectively. This meta-analysis highlighted the importance of redefining the Arg requirements of gestating sows and suggested a dosage ranging from 11.17 to 15.71 g/kg of feed to improve reproductive performance

Field-amplified sample injection and sweeping micellar electrokinetic chromatography in analysis of glyphosate and aminomethylphosphonic acid in wheat

Glyphosate, a widely used herbicide, has been classified as probably carcinogenic to humans by the International Agency for Research on Cancer (IARC). In the present study a method based on Field-Amplified Sample Injection and Sweeping Micellar Electrokinetic Chromatography (FASI sweep-MEKC) has been developed and validated for determination of glyphosate and its microbial metabolite aminomethylphosphonic acid (AMPA) in wheat flour. The method involved a preliminary solid phase extraction for cleanup of the aqueous extracts from wheat flour, based sequentially on C18 and strong anion exchange cartridges, followed by derivatization using 9-fluorenylmethylchloroformate. Optimization of sample cleanup and derivatization procedure was carried out by a HPLC-UV method, whereas FASI sweep-MEKC was applied for achieving the sensitivity necessary for analysis of real samples. To this regard, optimum conditions involved the use of an extended path fused-silica capillary (80 cm total length, 50 μm, i.d.) filled with a high concentration buffer (sodium phosphate 100 mM, pH 2.2). Electrokinetic sampling was carried out at −10 kV with injection time of 700 s and the separation of the loaded analytes was performed under MEKC conditions using sodium phosphate buffer 50 mM at pH 2.2, supplemented with sodium dodecyl sulfate, 100 mM. The method was validated for linearity, precision, accuracy and sensitivity, showing that using conventional UV detection (210 nm) the achieved limit of quantitation (LOQ) values for both the analytes were widely lower than those set by Authorities. In particular, LOQ for glyphosate and AMPA were found to be 5 and 2.5 ng/mL, respectively, corresponding to 0.1 and 0.05 mg/kg, in wheat flour. The method, applied to commercially available real samples (wheat flour from different manufacturers) and to an experimental sample obtained by cv. Svevo wheat, can be considered as a convenient alternative to the existing approaches in analysis of complex matrices

Electron transport in Ga-rich InxGa1-xN alloys

WOS: 000249810900060Resistivity and Hall effect measurements on n-type undoped Ga-rich InxGa1-xN (0.06 <= x <= 0.135) alloys grown by metal-organic vapour phase epitaxy (MOVPE) technique are carried out as a function of temperature (15-350K). Within the experimental error, the electron concentration in InxGa1-xN alloys is independent of temperature while the resistivity decreases as the temperature increases. Therefore, 1nxGai_x1V (0.06 <= x <= 0.135) alloys are considered in the metallic phase near the Mott transition. It has been shown that the temperature-dependent metallic conductivity can be well explained by the Mott model that takes into account electron-electron interactions and weak localization effects

Comparison and calibration of a real-time virtual stenting algorithm using Finite Element Analysis and Genetic Algorithms

In this paper, we perform a comparative analysis between two computational methods for virtual stent deployment: a novel fast virtual stenting method, which is based on a spring–mass model, is compared with detailed finite element analysis in a sequence of in silico experiments. Given the results of the initial comparison, we present a way to optimise the fast method by calibrating a set of parameters with the help of a genetic algorithm, which utilises the outcomes of the finite element analysis as a learning reference. As a result of the calibration phase, we were able to substantially reduce the force measure discrepancy between the two methods and validate the fast stenting method by assessing the differences in the final device configurations

A device to characterize optical fibres

ATLAS is a general purpose experiment approved for the LHC collider at CERN. An important component of the detector is the central hadronic calorimeter; for its construction more than 600,000 Wave Length Shifting (WLS) fibres (corresponding to a total length of 1,120 Km) have been used. We have built and put into operation a dedicated instrument for the measurement of light yield and attenuation length over groups of 20 fibres at a time. The overall accuracy achieved in the measurement of light yield (attenuation length) is 1.5% (3%). We also report the results obtained using this method in the quality control of a large sample of fibres.Comment: 17 pages 20 figeres submitted to NIM journa

Vibrational properties of phonons in random binary alloys: An augmented space recursive technique in the k-representation

We present here an augmented space recursive technique in the k-representation which include diagonal, off-diagonal and the environmental disorder explicitly : an analytic, translationally invariant, multiple scattering theory for phonons in random binary alloys.We propose the augmented space recursion (ASR) as a computationally fast and accurate technique which will incorporate configuration fluctuations over a large local environment. We apply the formalism to $Ni_{55}Pd_{45}$, Ni_{88}Cr_12} and $Ni_{50}Pt_{50}$ alloys which is not a random choice. Numerical results on spectral functions, coherent structure factors, dispersion curves and disordered induced FWHM's are presented. Finally the results are compared with the recent itinerant coherent potential approximation (ICPA) and also with experiments.Comment: 20 pages, LaTeX, 23 figure