On the efficiency of bile salt for stable suspension and isolation of single-walled carbon nanotubes-spectroscopic and microscopic investigations

In this contribution we present a systematic study on the dispersion of SWCNTs in a water-based solution of biocompatible detergent: sodium deoxycholate (DOC). By avoiding harsh chemical conditions, which are known to damage nanotubes structure, a stable SWCNTs suspension was created. Long term stirring of the solution led to preparation of a stable transparent solution, containing welldispersed isolated SWCNTs. The as-prepared dispersion remained stable and clear for two months. Optical absorption spectroscopy was employed to measure SWCNTs suspension stability. Nanotube aggregation was evaluated through the tangential mode (G mode) present in the Raman spectrum. High-resolution transmission electronmicroscopy was employed to observe the mechanism of debundling process. © 2010 Springer-Verlag

On the efficiency of bile salt for stable suspension and isolation of single-walled carbon nanotubes-spectroscopic and microscopic investigations

In this contribution we present a systematic study on the dispersion of SWCNTs in a water-based solution of biocompatible detergent: sodium deoxycholate (DOC). By avoiding harsh chemical conditions, which are known to damage nanotubes structure, a stable SWCNTs suspension was created. Long term stirring of the solution led to preparation of a stable transparent solution, containing welldispersed isolated SWCNTs. The as-prepared dispersion remained stable and clear for two months. Optical absorption spectroscopy was employed to measure SWCNTs suspension stability. Nanotube aggregation was evaluated through the tangential mode (G mode) present in the Raman spectrum. High-resolution transmission electronmicroscopy was employed to observe the mechanism of debundling process. © 2010 Springer-Verlag

On the formation process of silicon carbide nanophases via hydrogenated thermally induced templated synthesis

A thermally induced templated synthesis for SiC nanotubes and nanofibers using ammonia or nitrogen as a carrier gas, single wall carbon nanotubes (SWCNT) as templates as well as gaseous Si is presented. The bundles of SWCNT act as both the carbon source and as a nanoframe from which SiC structuctures form. Depending on the duration of the thermally induced templated reaction, for a fixed temperature, carrier gas, and gas pressure, various SiC nanostructures are obtained. These structures include SiC nanorods coated in C, SiC nanorods, SiC nanotubes, and SiC nanocrytals. From our analysis using transmission electron microscopy (TEM) and scanning electron microscopy (SEM), electron energy-loss spectroscopy (EELS), electron diffraction (EDX), optical absorption spectroscopy and Raman spectroscopy as probes we prove that H has a key role on the morphology and stochiometry of the different SiC nanostructures.Comment: 9 pages, 2 Figure

Pressure dependence of Raman modes in double wall carbon nanotubes filled with α-Fe.

The preparation of highly anisotropic one-dimensional (1D) structures confined into carbon nanotubes (CNTs) in general is a key objective in CNTs research. In this work, the capillary effect was used to fill double wall carbon nanotubes with iron. The samples are characterized by Mössbauer and Raman spectroscopy, transmission electron microscopy, scanning area electron diffraction, and magnetization. In order to investigate their structural stability and compare it with that of single wall carbon nanotubes (SWNTs), elucidating the differences induced by the inner-outer tube interaction, unpolarized Raman spectra of tangential modes of double wall carbon nanotubes (DWNTs) filled with 1D nanocrystallin α-Fe excited with 514 nm were studied at room temperature and elevated pressure. Up to 16 GPa we find a pressure coefficient for the internal tube of 4.3 cm−1 GPa−1 and for the external tube of 5.5 cm−1 GPa−1. In addition, the tangential band of the external and internal tubes broadens and decreases in amplitude. All findings lead to the conclusion that the outer tube acts as a protection shield for the inner tubes (at least up 16 GPa). Structural phase transitions were not observed in this range of pressure

Structural Modification in Carbon Nanotubes by Boron Incorporation

We have synthesized boron-incorporated carbon nanotubes (CNTs) by decomposition of ferrocene and xylene in a thermal chemical vapor deposition set up using boric acid as the boron source. Scanning and transmission electron microscopy studies of the synthesized CNT samples showed that there was deterioration in crystallinity and improvement in alignment of the CNTs as the boron content in precursor solution increased from 0% to 15%. Raman analysis of these samples showed a shift of ~7 cm−1in wave number to higher side and broadening of the G band with increasing boron concentration along with an increase in intensity of the G band. Furthermore, there was an increase in the intensity of the D band along with a decrease in its wave number position with increase in boron content. We speculate that these structural modifications in the morphology and microstructure of CNTs might be due to the charge transfer from boron to the graphite matrix, resulting in shortening of the carbon–carbon bonds

BN domains included into carbon nanotubes: role of interface

We present a density functional theory study on the shape and arrangement of small BN domains embedded into single-walled carbon nanotubes. We show a strong tendency for the BN hexagons formation at the simultaneous inclusion of B and N atoms within the walls of carbon nanotubes. The work emphasizes the importance of a correct description of the BN-C frontier. We suggest that BN-C interface will be formed preferentially with the participation of N-C bonds. Thus, we propose a new way of stabilizing the small BN inclusions through the formation of nitrogen terminated borders. The comparison between the obtained results and the available experimental data on formation of BN plackets within the single walled carbon nanotubes is presented. The mirror situation of inclusion of carbon plackets within single walled BN nanotubes is considered within the proposed formalism. Finally, we show that the inclusion of small BN plackets inside the CNTs strongly affects the electronic character of the initial systems, opening a band gap. The nitrogen excess in the BN plackets introduces donor states in the band gap and it might thus result in a promising way for n-doping single walled carbon nanotubes

Synthesis of carbon nanotubes with and without catalyst particles

The initial development of carbon nanotube synthesis revolved heavily around the use of 3d valence transition metals such as Fe, Ni, and Co. More recently, noble metals (e.g. Au) and poor metals (e.g. In, Pb) have been shown to also yield carbon nanotubes. In addition, various ceramics and semiconductors can serve as catalytic particles suitable for tube formation and in some cases hybrid metal/metal oxide systems are possible. All-carbon systems for carbon nanotube growth without any catalytic particles have also been demonstrated. These different growth systems are briefly examined in this article and serve to highlight the breadth of avenues available for carbon nanotube synthesis

Raman Study on Doped Multiwalled Carbon Nanotubes

In the present study we report resonance Raman study on multiwalled carbon nanotubes treated with HCl, $HNO_3$ and $H_2SO_4$. Acids are commonly used in purification procedures in order to remove catalyst particles from the as-produced material. However, it is known that acid treatments in multiwalled carbon nanotubes can induce a surface functionalisation and intercalation of the walls, modifying their electronic properties. Here, we present a comparative study between samples of multiwalled carbon nanotubes modified with the most common acids used in the purification of carbon materials, and the influence of the acid treatment time on their vibronic properties. The samples were analysed via the Raman spectroscopy using the laser length of 785 nm. The presented data reveal the modification of the typical multiwalled carbon nanotubes Raman bands such as: disorder band (D band), the graphite band (G band), and the two-phonon second order Raman band (G' band). The last one shows a broadening effect on its line shape and the appearance of an additional peak. All the treatments enhance the number of defects in the graphitic structure of multiwalled carbon nanotubes