Cross sectional and prospective relationship between physical activity and depression in Europe older adults

Objectives: The present study aims to analyse the cross-sectional and prospective relationship between regular practice of moderate and vigorous physical activity (PA) and depression symptoms using data from 2011 and 2013. Methodology: This study analysed 38135 European older adults, from 13 European countries across a two-year follow-up. Data was collected in the fourth (in 2011) and fifth (in 2013) wave, from the Survey of Health, Ageing and Retirement in Europe (SHARE). For the present analysis were only considered participants who responded to the EURO-D 12-item scale of symptoms of depression, and with reported PA. Participants were inquired about the presence or absence of twelve symptom domains of depression and asked to report their frequency of moderate PA and vigorous PA. General linear models were conducted to access the cross-sectional and prospective associations. Results: For both men and women, practising moderate or vigorous PA in 2011 was associated with a lower score of depression in 2011 and 2013. From the prospective analysis, moderate and vigorous PA in 2011 was inversely associated with the score of depression. This association remains significant in the fully adjusted model. Conclusions: Moderate and vigorous PA practised once, or more than once a week is negatively related to the score of depression, both in men and women. The present study brings further support to the notion that PA is negatively associated with depression symptoms

Soybean oil transesterification for biodiesel production with micro-structured calcium oxide (CaO) from natural waste materials as a heterogeneous catalyst

In this study, micro-structured calcium oxide obtained from the calcination (850 degrees C for 3 h) of Gallus gallus domesticus (chicken) eggshells was used as a catalyst in the transesterification of soybean oil. This catalyst was characterized by Scanning Electron Spectroscopy (SEM) methods. The structure of the obtained CaO showed several agglomerates of white granular solids with a non-regular and unsymmetrical shape. In terms of calcium oxide catalytic activity, three different catalyst loadings (1%wt, 3%wt, and 5%wt) were tested for the same reaction conditions, resulting in transesterification yields of 77.27%wt, 84.53%wt, and 85.83%wt respectively. The results were compared to the current literature, and whilst they were lower, they were promising, allowing us to conclude that the tendency of yield improvement for this reaction, when the size range of catalyst particles is to be reduced to a nano scale, can be verified.info:eu-repo/semantics/publishedVersio

Where is Tyche? Bringing the ‘hap’ back into Happiness

In this paper, I seek to revitalize the concept of happiness by conceptualizing it as a relational and instantaneous phenomenon with both existential, ethical and political dimensions. Happiness hap-ens – in and through encounters, and it does so when we least expect it. Drawing on Bachelard’s writings on ‘the instant’, as well as Gumbrecht’s and Rosa’s much related concepts of ‘presence’ and ‘resonance’, I attempt to formulate a more relational and nonvolitional counter-concept of happiness that blurs the border between eudemonic happiness and subjective well-being on the one hand and positive affect on the other. Safe-guarding opportunities for these moments to happen is to be seen as vital in a contemporary society governed by individualization, rationalization and hedonistic principles. Even though one cannot choose to be happy, one can indeed lead a good life; colored by an openness towards the other and what might come

Exposure to airborne ultrafine particles from cooking in portuguese homes

Cooking was found to be a main source of submicrometer and ultrafine aerosols from gas combustion in stoves. Therefore, this study consisted of the determination of the alveolar deposited surface area due to aerosols resulting from common domestic cooking activities (boiling fish, vegetables, or pasta, and frying hamburgers and eggs). The concentration of ultrafine particles during the cooking events significantly increased from a baseline of 42.7 mu m(2)/cm(3) (increased to 72.9 mu m(2)/cm(3) due to gas burning) to a maximum of 890.3 mu m(2)/cm(3) measured during fish boiling in water, and a maximum of 4500 mu m(2)/cm(3) during meat frying. This clearly shows that a domestic activity such as cooking can lead to exposures as high as those of occupational exposure activities

Assessment of exposure to airborne ultrafine particles in the urban environment of Lisbon, Portugal

The aim of this study was the assessment of exposure to ultrafine in the urban environment of Lisbon, Portugal, due to automobile traffic, and consisted of the determination of deposited alveolar surface area in an avenue leading to the town center during late spring. This study revealed differentiated patterns for weekdays and weekends, which could be related with the fluxes of automobile traffic. During a typical week, ultrafine particles alveolar deposited surface area varied between 35.0 and 89.2 μm2/cm3, which is comparable with levels reported for other towns such in Germany and the United States. These measurements were also complemented by measuring the electrical mobility diameter (varying from 18.3 to 128.3 nm) and number of particles that showed higher values than those previously reported for Madrid and Brisbane. Also, electron microscopy showed that the collected particles were composed of carbonaceous agglomerates, typical of particles emitted by the exhaustion of diesel vehicles. Implications: The approach of this study considers the measurement of surface deposited alveolar area of particles in the outdoor urban environment of Lisbon, Portugal. This type of measurements has not been done so far. Only particulate matter with aerodynamic diameters 10 (PM10) μm have been measured in outdoor environments and the levels found cannot be found responsible for all the observed health effects. Therefore, the exposure to nano- and ultrafine particles has not been assessed systematically, and several authors consider this as a real knowledge gap and claim for data such as these that will allow for deriving better and more comprehensive epidemiologic studies. Nanoparticle surface area monitor (NSAM) equipments are recent ones and their use has been limited to indoor atmospheres. However, as this study shows, NSAM is a very powerful tool for outdoor environments also. As most lung diseases are, in fact, related to deposition of the alveolar region of the lung, the metric used in this study is the ideal one

Monitoring exposure to airborne ultrafine particles in Lisbon, Portugal

The aim of this study is to contribute to the assessment of exposure levels of ultrafine particles (UFP) in the urban environment of Lisbon, Portugal, due to automobile traffic, by monitoring lung-deposited alveolar surface area (resulting from exposure to UFP) in a major avenue leading to the town centre during late Spring, as well as in indoor buildings facing it. This study revealed differentiated patterns for week days and weekends, consistent with PM(2.5) and PM(10) patterns currently monitored by air quality stations in Lisbon. The observed ultrafine particulate levels could be directly related with the fluxes of automobile traffic. During a typical week, UFP alveolar deposited surface area varied between 35.0 and 89.2 µm(2)/cm(3), which is comparable with levels reported for other towns such in Germany and United States. The measured values allowed the determination of the number of UFP per cm(3), which are comparable to levels reported for Madrid and Brisbane. In what concerns outdoor/indoor levels, we observed higher levels (32-63%) outdoor, which is somewhat lower than levels observed in houses in Ontario

Monitorization of alveolar deposited surface area of nanoparticles and ultrafine particles in different environments

Nanotechnology is an important emerging industry with a projected annual market of around one trillion dollars by 2015. It involves the control of atoms and molecules to create new materials with a variety of useful functions. Although there are advantages on the utilization of these nano-scale materials, questions related with its impact over the environment and human health must be addressed too, so that potential risks can be limited at early stages of development. At this time, occupational health risks associated with manufacturing and use of nanoparticles are not yet clearly understood. However, workers may be exposed to nanoparticles through inhalation at levels that can greatly exceed ambient concentrations. Current workplace exposure limits are based on particle mass, but this criteria could not be adequate in this case as nanoparticles are characterized by very large surface area, which has been pointed out as the distinctive characteristic that could even turn out an inert substance into another substance exhibiting very different interactions with biological fluids and cells. Therefore, it seems that, when assessing human exposure based on the mass concentration of particles, which is widely adopted for particles over 1 μm, would not work in this particular case. In fact, nanoparticles have far more surface area for the equivalent mass of larger particles, which increases the chance they may react with body tissues. Thus, it has been claimed that surface area should be used for nanoparticle exposure and dosing. As a result, assessing exposure based on the measurement of particle surface area is of increasing interest. It is well known that lung deposition is the most efficient way for airborne particles to enter the body and cause adverse health effects. If nanoparticles can deposit in the lung and remain there, have an active surface chemistry and interact with the body, then, there is potential for exposure. It was showed that surface area plays an important role in the toxicity of nanoparticles and this is the metric that best correlates with particle-induced adverse health effects. The potential for adverse health effects seems to be directly proportional to particle surface area. The objective of the study is to identify and validate methods and tools for measuring nanoparticles during production, manipulation and use of nanomaterials