629 research outputs found
Tungsten Behavior at High Temperature and High Stress
ReĀcentĀly reĀportĀed reĀsults on the tungĀsten lifeĀtime/faĀtigue tests under conĀdiĀtions exĀpectĀed in the NeuĀtriĀno FacĀtoĀry tarĀget have strengthĀened the case of solid tarĀget opĀtion for a NeuĀtriĀno FacĀtoĀry. This paper gives deĀscripĀtion of the deĀtailed meaĀsureĀments of the tungĀsten propĀerĀties at high temĀperĀaĀture and high stress. We have perĀformed exĀtenĀsive set of meaĀsureĀments of the surĀface disĀplaceĀment and veĀlocĀiĀty of the tungĀsten wires that were stressed by passĀing a fast, high curĀrent pulse through a thin samĀple. RaĀdiĀal and lonĀgiĀtuĀdiĀnal osĀcilĀlaĀtions of the wire were meaĀsured by a Laser Doppler ViĀbromĀeĀter. The wire was opĀerĀatĀed at temĀperĀaĀtures of 300-2500 K by adĀjustĀing the pulse repĀeĀtiĀtion rate. In doing so we have tried to simĀuĀlate the conĀdiĀtions (high stress and temĀperĀaĀture) exĀpectĀed at the NeuĀtriĀno FacĀtoĀry. Most imĀporĀtant reĀsult of this study is an exĀperĀiĀmenĀtal conĀfirĀmaĀtion that strength of tungĀsten reĀmains high at high temĀperĀaĀture and high stress. The exĀperĀiĀmenĀtal reĀsults have been found to agree very well with LS-DYĀNA modĀelling reĀsults
SARS-CoV 9b protein diffuses into nucleus, undergoes active Crm1 mediated nucleocytoplasmic export and triggers apoptosis when retained in the nucleus
10.1371/journal.pone.0019436PLoS ONE65
Recommended from our members
Analyses and hydrogen-isotope-transport calculations of current and future designs of the LLL rotating-target neutron source
Analyses of the present titanium-tritide RTNS targets are presented. These results include the hydrogen-isotope content of new and used targets, metallography, scanning electron microscopy, and hydrogen-isotope-diffusion calculations using a heat-flow finite-difference computer code. These latter calculations indicate that a combination of long target life and high neutron output is optimized when the rate of hydrogen isotope evolution from the target balances the deposition rate from the beam. Auger spectra show that carbon and oxygen species are present in the bulk and on the surface. (auth
Do we know the mass of a black hole? Mass of some cosmological black hole models
Using a cosmological black hole model proposed recently, we have calculated
the quasi-local mass of a collapsing structure within a cosmological setting
due to different definitions put forward in the last decades to see how similar
or different they are. It has been shown that the mass within the horizon
follows the familiar Brown-York behavior. It increases, however, outside the
horizon again after a short decrease, in contrast to the Schwarzschild case.
Further away, near the void, outside the collapsed region, and where the
density reaches the background minimum, all the mass definitions roughly
coincide. They differ, however, substantially far from it. Generically, we are
faced with three different Brown-York mass maxima: near the horizon, around the
void between the overdensity region and the background, and another at
cosmological distances corresponding to the cosmological horizon. While the
latter two maxima are always present, the horizon mass maxima is absent before
the onset of the central singularity.Comment: 11 pages, 8 figures, revised version, accepted in General Relativity
and Gravitatio
In situ fracture behavior of single crystal LiNi0.8Mn0.1Co0.1O2 (NMC811)
Single crystal particle morphologies have become highly desirable for next generation cathode materials, removing grain boundary fracture and thereby reducing the surface area exposed to electrolyte. The intrinsic mechanical behavior of single crystal layered oxides, however, is poorly understood. Here, faceted single crystal LiNi0.8Mn0.1Co0.1O2 (NMC811) particles are compressed inā
situ in a scanning electron microscope (SEM), to determine mechanical deformation mechanisms as a function of crystallographic orientation. In situ, the dynamical deformation sequence observed is initial cracking at the compression zone, followed by accelerated transparticle crack propagation and concurrent (0001) slip band formation. The greatest loads and contact pressure at fracture, non-basal cracking, and activation of multiple basal slip systems in larger (>3ā
Ī¼m) particles, occur for compression normal to the (0001) layered structure. Loading on {012} preferentially activates basal fracture and slip at lower loads. Regardless of particle orientation, non-basal slip systems are not observed, and non-basal cracking and particle rotation occur during compression to compensate for this inability to activate dislocations in 3-dimensions. Crystallographic dependent mechanical behaviour of single crystal NMC811 means that particle texture in cathodes should be monitored, and sources of localised surface stress in cathodes, e.āg. particle-to-particle asperity contacts during electrode manufacture, should be minimised
Insights into the electrochemical reduction products and processes in silica anodes for next-generation lithium-ion batteries
The use of silica as a lithiumāion battery anode material requires a pretreatment step to induce electrochemical activity. The partially reversible electrochemical reduction reaction between silica and lithium has been postulated to produce silicon, which can subsequently reversibly react with lithium, providing stable capacities higher than graphite materials. Up to now, the electrochemical reduction pathway and the nature of the products were unknown, thereby hampering the design, optimization, and wider uptake of silicaābased anodes. Here, the electrochemical reduction pathway is uncovered and, for the first time, elemental silicon is identified as a reduction product. These insights, gleaned from analysis of the current response and capacity increase during reduction, conclusively demonstrated that silica must be reduced to introduce reversible capacity and the highest capacities of 600 mAh gā1 are achieved by using a constant load discharge at elevated temperature. Characterization via total scattering Xāray pair distribution function analysis reveal the reduction products are amorphous in nature, highlighting the need for local structural methods to uncover vital information often inaccessible by traditional diffraction. These insights contribute toward understanding the electrochemical reduction of silica and can inform the development of pretreatment processes to enable their incorporation into nextāgeneration lithiumāion batteries
Direct observation of dynamic lithium diffusion behavior in nickel-rich, LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes using operando muon spectroscopy
Ni-rich layered oxide cathode materials such as LiNi0.8Mn0.1Co0.1O2 (NMC811) are widely tipped as the next-generation cathodes for lithium-ion batteries. The NMC class offers high capacities but suffers an irreversible first cycle capacity loss, a result of slow Li+ diffusion kinetics at a low state of charge. Understanding the origin of these kinetic hindrances to Li+ mobility inside the cathode is vital to negate the first cycle capacity loss in future materials design. Here, we report on the development of operando muon spectroscopy (Ī¼SR) to probe the Ć
-length scale Li+ ion diffusion in NMC811 during its first cycle and how this can be compared to electrochemical impedance spectroscopy (EIS) and the galvanostatic intermittent titration technique (GITT). Volume-averaged muon implantation enables measurements that are largely unaffected by interface/surface effects, thus providing a specific characterization of the fundamental bulk properties to complement surface-dominated electrochemical methods. First cycle measurements show that the bulk Li+ mobility is less affected than the surface Li+ mobility at full depth of discharge, indicating that sluggish surface diffusion is the likely cause of first cycle irreversible capacity loss. Additionally, we demonstrate that trends in the nuclear field distribution width of the implanted muons during cycling correlate with those observed in differential capacity, suggesting the sensitivity of this Ī¼SR parameter to structural changes during cycling
On the energy-momentum tensor for a scalar field on manifolds with boundaries
We argue that already at classical level the energy-momentum tensor for a
scalar field on manifolds with boundaries in addition to the bulk part contains
a contribution located on the boundary. Using the standard variational
procedure for the action with the boundary term, the expression for the surface
energy-momentum tensor is derived for arbitrary bulk and boundary geometries.
Integral conservation laws are investigated. The corresponding conserved
charges are constructed and their relation to the proper densities is
discussed. Further we study the vacuum expectation value of the energy-momentum
tensor in the corresponding quantum field theory. It is shown that the surface
term in the energy-momentum tensor is essential to obtain the equality between
the vacuum energy, evaluated as the sum of the zero-point energies for each
normal mode of frequency, and the energy derived by the integration of the
corresponding vacuum energy density. As an application, by using the zeta
function technique, we evaluate the surface energy for a quantum scalar field
confined inside a spherical shell.Comment: 25 pages, 2 figures, section and appendix on the surface energy for a
spherical shell are added, references added, accepted for publication in
Phys. Rev.
In situ diffusion measurements of a NASICON-structured all-solid-state battery using muon spin relaxation
In situ muon spin relaxation is demonstrated as an emerging technique that can provide a volume-averaged local probe of the ionic diffusion processes occurring within electrochemical energy storage devices as a function of state of charge. Herein, we present work on the conceptually interesting NASICON-type all-solid-state battery LiM2(PO4)3, using M = Ti in the cathode, M = Zr in the electrolyte, and a Li metal anode. The pristine materials are studied individually and found to possess low ionic hopping activation energies of ā¼50ā60 meV and competitive Li+ self-diffusion coefficients of ā¼10^ā10ā10^ā9 cm2 s^ā1 at 336 K. Lattice matching of the cathode and electrolyte crystal structures is employed for the all-solid-state battery to enhance Li+ diffusion between the components in an attempt to minimize interfacial resistance. The cell is examined by in situ muon spin relaxation, providing the first example of such ionic diffusion measurements. This technique presents an opportunity to the materials community to observe intrinsic ionic dynamics and electrochemical behavior simultaneously in a nondestructive manner
The role of the reducible dopant in solid electrolyteālithium metal interfaces
Garnet solid electrolytes, of the form Li7La3Zr2O12 (LLZO), remain an enticing prospect for solid-state batteries owing to their chemical and electrochemical stability in contact with metallic lithium. Dopants, often employed to stabilize the fast ion conducting cubic garnet phase, typically have no effect on the chemical stability of LLZO in contact with Li metal but have been found recently to impact the properties of the Li/garnet interface. For dopants more "reducible"than Zr (e.g., Nb and Ti), contradictory reports of either raised or reduced Li/garnet interfacial resistances have been attributed to the dopant. Here, we investigate the Li/LLZO interface in W-doped Li7La3Zr2O12 (LLZWO) to determine the influence of a "reducible"dopant on the electrochemical properties of the Li/garnet interface. Single-phase LLZWO is synthesized by a new sol-gel approach and densified by spark plasma sintering. Interrogating the resulting Li/LLZWO interface/interphase by impedance, muon spin relaxation and X-ray absorption spectroscopies uncover the significant impact of surface lithiation on electrochemical performance. Upon initial contact, an interfacial reaction occurs between LLZWO and Li metal, leading to the reduction of surface W6+ centers and an initial reduction of the Li/garnet interfacial resistance. Propagation of this surface reaction, driven by the high mobility of Li+ ions through the grain surfaces, thickens the resistive interphases throughout the material and impedes Li+ ion transport between the grains. The resulting high resistance accumulating in the system impedes cycling at high current densities. These insights shed light on the nature of lithiated interfaces in garnet solid electrolytes containing a reducible dopant where high Li+ ion mobility and the reducible nature of the dopant can significantly affect electrochemical performance
- ā¦