457 research outputs found
CXCR5 and TIM-3 expressions define distinct exhausted T cell subsets in experimental cutaneous infection with Leishmania mexicana
T-cell exhaustion is a key stage in chronic infections since it limits immunopathology, but also hinders the elimination of pathogens. Exhausted T (Tex) cells encompass dynamic subsets, including progenitor cells that sustain long-term immunity through their memory/stem like properties, and terminally-differentiated cells, resembling the so-called Tex cells. The presence of Tex cells in chronic leishmaniasis has been reported in humans and murine models, yet their heterogeneity remains unexplored. Using flow cytometry, we identified Tex cells subtypes based on PD-1, CXCR5 and TIM-3 expressions in draining lymph nodes (dLNs) and lesion sites of C57BL/6 mice infected with L. mexicana at 30-, 60- and 90-days post-infection. We showed that infected mice developed a chronic infection characterized by non-healing lesions with a high parasite load and impaired Th1/Th2 cytokine production. Throughout the infection, PD-1+ cells were observed in dLNs, in addition to an enhanced expression of PD-1 in both CD4+ and CD8+ T lymphocytes. We demonstrated that CD4+ and CD8+ T cells were subdivided into PD-1+CXCR5+TIM-3- (CXCR5+), PD-1+CXCR5+TIM-3+ (CXCR5+TIM-3+), and PD-1+CXCR5-TIM-3+ (TIM-3+) subsets. CXCR5+ Tex cells were detected in dLNs during the whole course of the infection, whereas TIM-3+ cells were predominantly localized in the infection sites at day 90. CXCR5+TIM-3+ cells only increased at 30 and 60 days of infection in dLNs, whereas no increase was observed in the lesions. Phenotypic analysis revealed that CXCR5+ cells expressed significantly higher levels of CCR7 and lower levels of CX3CR1, PD-1, TIM-3, and CD39 compared to the TIM-3+ subset. CXCR5+TIM-3+ cells expressed the highest levels of all exhaustion-associated markers and of CX3CR1. In agreement with a less exhausted phenotype, the frequency of proliferating Ki-67 and IFN-γ expressing cells was significantly higher in the CXCR5+ subset within both CD4+ and CD8+ T cells compared to their respective TIM-3+ subsets, whereas CD8+CXCR5+TIM-3+ and CD8+TIM-3+ subsets showed an enhanced frequency of degranulating CD107a+ cells. In summary, we identified a novel, less-differentiated CXCR5+ Tex subset in experimental cutaneous leishmaniasis caused by L. mexicana. Targeting these cells through immune checkpoint inhibitors such as anti-PD-1 or anti PD-L1 might improve the current treatment for patients with the chronic forms of leishmaniasis
Tinea nigra by Hortaea werneckii, a report of 22 cases from Mexico
Tinea nigra is a superficial mycosis caused by Hortaea werneckii.
It is an infrequent asymptomatic infection that affects human palms and soles,
and is mostly observed in tropical countries. We evaluate retrospectively
twenty-two confirmed cases of tinea nigra from a total of eleven yr
(1997–2007) and discuss the epidemiology, clinical features and
treatment of this disease. In twelve cases, adults were involved, in 10,
children. In nineteen cases the disorder was located on palms of hands and in
three on soles of feet. In all cases, the obtained isolates were
morphologically identified as Hortaea werneckii and the
identification of ten isolates was retrospectively confirmed with the help of
sequences of the internal transcribed spacer regions of the ribosomal DNA. The
patients received topical treatment with Whitfield ointment, ketoconazole,
bifonazole, or terbinafine. Treatment with keratolytic agents and topical
antifungals was effective
Calendar 2012
Background Fusarium species are among the most common fungi present in the environment and some species have emerged as major opportunistic fungal infection in human. However, in immunocompromised hosts they can be virulent pathogens and can cause death. The pathogenesis of this infection relies on three factors: colonization, tissue damage, and immunosuppression. A novel Fusarium species is reported for the first time from keratitis in an agriculture worker who acquired the infection from plant material of maize. Maize plants are the natural host of this fungus where it causes stalk rot and seeding malformation under temperate and humid climatic conditions. The clinical manifestation, microbiological morphology, physiological features and molecular data are described.MethodsDiagnosis was established by using polymerase chain reaction of fungal DNA followed by sequencing portions of translation elongation factor 1 alpha (TEF1 ¿) and beta-tubulin (BT2) genes. Susceptibility profiles of this fungus were evaluated using CLSI broth microdilution method.ResultsThe analyses of these two genes sequences support a novel opportunist with the designation Fusarium temperatum. Phylogenetic analyses showed that the reported clinical isolate was nested within the Fusarium fujikuroi species complex. Antifungal susceptibility testing demonstrated that the fungus had low MICs of micafungin (0.031 ¿g/ml), posaconazole (0.25 ¿g/ml) and amphotericin B (0.5 ¿g/ml).ConclusionThe present case extends the significance of the genus Fusarium as agents of keratitis and underscores the utility of molecular verification of these emerging fungi in the human host
Molecular Epidemiology of Fonsecaea Species
These fungi disperse slowly, leading to changes in structure at different geographic locations
Diagnostic implications of mycetoma derived from Madurella pseudomycetomatis isolates from Mexico
Background: At the dermatology service of the General Hospital of Mexico City, Mexico, two patients, father and son, with black-grain mycetoma were seen. The grains were isolated, and the cultured fungi were identified as Madurella mycetomatis based on morphology. Using the M. mycetomatis specific PCR, amplicons of a different size than that of the M. mycetomatis type strain were obtained. Objective: To determine the causative agent of the two black-grain mycetoma cases and develop non-culture-based diagnostic tools to identify them to the species level. Methods: The M. mycetomatis specific, the internal transcribed spacer (ITS) region, β-tubulin (BT) and ribosomal binding protein 2 (RBP2) PCRs were used to confirm the identity of the isolates. Genetic variation was established by amplification fragment length polymorphisms. To determine the antifungal susceptibility profile, the Sensititre™ YeastOne™ assay was used. To develop a species-specific PCR primers were designed on the sequenced PCR amplicon from the M. mycetomatis specific PCR. Results: By analyzing the ITS, BT and RBP2 regions the isolates were identified as Madurella pseudomycetomatis. The isolates from father and son were similar but not identical to M. pseudomycetomatis from Venezuela and one from an unknown origin. Madurella pseudomycetomatis isolates were inhibited by itraconazole, posaconazole and voriconazole but showed increased MIC values for amphotericin B and fluconazole. They were not inhibited by the echinocandins and five flucytosine. The two patients were treated with itraconazole resulting in cure for the father while the son was lost to follow-up. The species-specific PCR developed for M. pseudomyceotmatis was discriminative and specific. Conclusion: Madurella pseudomycetomatis is genetically diverse with same susceptibility profile as M. mycetomatis and causes eumycetoma in Latin America. The M. pseudomycetomatis specific PCR can be used to identify this causative agen
Dual-Phase Steels Modeling -A Strain Gradient Approach
Abstract To obtain the behaviour of dual-phase microstructures, a three-dimensional (3D) strain gradient finite element model has been developed. The effect of grain size on flow stress has been investigated in polycristalline dual-phase steels. A strong size-dependence of plastic deformation in the micron range is observed. To describe the work hardening process in polycrystalline materials, two models, a gradient-one-internal-variable model and a gradient-total dislocation density evolution model, constructed in the basis of the Kocks-Mecking model are proposed. Results demonstrate that more dislocations are stored in specimens with finer grains and that the total dislocation density is not a single function of strain. Ferrite and martensite individual mechanical behaviour calculated into the dual-phase composite structure are presented. The effect of plastic deformation gradients imposed by the microstructure is clearly observed. An attempt is made to determine the mathematical expressions which best describe the strain hardening behaviour of crystalline materials in uniaxial deformation
Multicenter, International Study of MIC/ MEC Distributions for definition of epidemiological cutoff values for sporothrix species identified by molecular methods
Clinical and Laboratory Standards Institute (CLSI) conditions for testing the susceptibilities of pathogenic Sporothrix species to antifungal agents are based on a collaborative study that evaluated five clinically relevant isolates of Sporothrix schenckii sensu lato and some antifungal agents. With the advent of molecular identification, there are two basic needs: to confirm the suitability of these testing conditions for all agents and Sporothrix species and to establish species-specific epidemiologic cutoff values (ECVs) or breakpoints (BPs) for the species. We collected available CLSI MICs/minimal effective concentrations (MECs) of amphotericin B, five triazoles, terbinafine, flucytosine, and caspofungin for 301 Sporothrix schenckii sensu stricto, 486 S. brasiliensis, 75 S. globosa, and 13 S. mexicana molecularly identified isolates. Data were obtained in 17 independent laboratories (Australia, Europe, India, South Africa, and South and North America) using conidial inoculum suspensions and 48 to 72 h of incubation at 35°C. Sufficient and suitable data (modal MICs within 2-fold concentrations) allowed the proposal of the following ECVs for S. schenckii and S. brasiliensis, respectively: amphotericin B, 4 and 4 /ml; itraconazole, 2 and 2 μg/ml; posaconazole, 2 and 2 μg/ml; and voriconazole, 64 and 32 μg/ml. Ketoconazole and terbinafine ECVs for S. brasiliensis were 2 and 0.12 μg/ml, respectively. Insufficient or unsuitable data precluded the calculation of ketoconazole and terbinafine (or any other antifungal agent) ECVs for S. schenckii, as well as ECVs for S. globosa and S. mexicana. These ECVs could aid the clinician in identifying potentially resistant isolates (non-wild type) less likely to respond to therapy.A. Espinel-Ingroff, D. P. B. Abreu, R. Almeida-Paes, R. S. N. Brilhante, A. Chakrabarti, A. Chowdhary, F. Hagen, S. Córdoba, G. M. Gonzalez, N. P. Govender, J. Guarro, E. M. Johnson, S. E. Kidd, S. A. Pereira, A. M. Rodrigues, S. Rozental, M. W. Szeszs, R. Ballesté Alaniz, A. Bonifaz, L. X. Bonfietti, L. P. Borba-Santos, J. Capilla, A. L. Colombo, M. Dolande, M. G. Isla, M. S. C. Melhem, A. C. Mesa-Arango, M. M. E. Oliveira, M. M. Panizo, Z. Pires de Camargo, R. M. Zancope-Oliveira, J. F. Meis, J. Turnidge
La reestructuración industrial en México, cinco aspectos fundamentales
La modernización de la industria mexicana en la crisis ha implicado mayor peso del mercado exterior y una transformación del régimen de propiedad.
Estos cambios se insertan en la crisis internacional de largo plazo del capitalismo, durante la cual las escalas de producción y los métodos productivos se transformaron al tenor de la recomposición del capital, el mercado y la revolución científico-técnica. La manufactura tradicional pierde peso en la economía de los países desarrollados y se fragmenta y dispersa por el mundo bajo el control de las trasnacionales.
En este libro, Marco Gómez de la UAM-Xochimilco se acerca a los cambios internacionales del proceso de trabajo; Josefina Morales, del Instituto de Investigaciones Económicas (IIEc) de la UNAM -coordinadora del trabajo- presenta un análisis de la reestructuración industrial de México; Francisco Vidal, analista independiente, examina la privatización y los ajustes de la industria estatal; Olivia Sarahí Angeles, tambien del IIEc, reflexiona sobre la recomposición de las empresas y grupos privados que operan en la industria; y Atlántida Coll- Hurtado, del Instituto de Geografía de la UNAM, expone las manifestaciones espaciales del proceso industrial nacional
- …