19,066 research outputs found
Recommended from our members
New safety model for the commercial human spaceflight industry
The aviation and space domains have safety guidelines and recommended practices for Design Organisations (DOs) and Operators alike. In terms of Aerospace DOs there are certification criteria to meet and to demonstrate compliance there are Advisory Circulars or Acceptable Means of Compliance to follow. Additionally there are guidelines such as Aerospace Recommended Practices (ARP), Military Standards (MIL-STD 882 series) and System Safety Handbooks to follow in order to identify and manage failure conditions. In terms of Operators there are FAA guidelines and a useful ARP that details many tools and techniques in understanding Operator Safety Risks. However there is currently no methodology for linking the DO and Operator safety efforts. In the space domain NASA have provided safety standards and guidelines to follow and also within Europe there are European Co-operation of Space Standardization (ECSS) to follow. Within the emerging Commercial Human Spaceflight Industry, the FAA’s Office of Commercial Space Transportation has provided hazard analysis guidelines. However all of these space domain safety documents are based on the existing aerospace methodology and once again, there is no link between the DO and Operator’s safety effort.
This paper addresses the problematic issue and presents a coherent methodology of joining up the System Safety effort of the DOs to the Operator Safety Risk Management such that a ‘Total System’ approach is adopted. Part of the rationale is that the correct mitigation (control) can be applied within the correct place in the accident sequence. Also this contiguous approach ensures that the Operator is fully aware of the safety risks (at the accident level) and therefore has an appreciation of the Total System Risk.
The authors of this paper contend that it is better practice to have a fully integrated safety model as opposed to disparate requirements or guidelines. Our methodology is firstly to review ‘best practice’ approaches from the aviation and space industries, and then to integrate these approaches into a contiguous safety model for the commercial human spaceflight industry
Insight into tube-building behaviour and palaeoecology of some agglutinating worms from the Upper Devonian of Nevada, USA
Agglutinated worm tubes from the Upper Devonian of the Devils Gate section in Nevada, USA are reported for the first time, filling a major gap in their Palaeozoic fossil record. Two small (5 mm and 6.7 mm in length) tubes are composed entirely of tentaculitid shells, and one large tube (55 mm in length) is formed from particles including ostracode carapaces, echinoderm ossicles, tentaculitid shells and putative bryozoan fragments aligned perpendicularly to the tube’s long axis. The tubes, in particular the large one have a cylindrical, curved and tapering tube morphology that is very similar to that of modern agglutinating polychaetes of the families Terebellidae and Pectinariidae. The large tube is dominated by objects that fall within a certain size-range, and although built from different types of particles, echinoderm ossicles are prevalent in the posterior part, whereas ostracode carapaces dominate in the middle and anterior parts of the tube. Tentaculitid shells are relatively rare in the large tube, despite being abundant in the surrounding host deposit. The faunal assemblage composing the tube suggests that the worm animal was rather specific in its selection of particles with a certain morphology. This is common behaviour amongst many modern agglutinating terebellid and pectinariid polychaetes. The preservation of such fragile tubes was enhanced by rapid burial, likely caused by gravity flow of sediment in a deep-slope setting
Large igneous provinces and mass extinctions: an update
The temporal link between mass extinctions and large igneous provinces is well known. Here, we examine this link by focusing on the potential climatic effects of large igneous province eruptions during several extinction crises that show the best correlation with mass volcanism: the Frasnian-Famennian (Late Devonian), Capitanian (Middle Permian), end-Permian, end-Triassic, and Toarcian (Early Jurassic) extinctions. It is clear that there is no direct correlation between total volume of lava and extinction magnitude because there is always sufficient recovery time between individual eruptions to negate any cumulative effect of successive flood basalt eruptions. Instead, the environmental and climatic damage must be attributed to single-pulse gas effusions. It is notable that the best-constrained examples of death-by-volcanism record the main extinction pulse at the onset of (often explosive) volcanism (e.g., the Capitanian, end-Permian, and end-Triassic examples), suggesting that the rapid injection of vast quantities of volcanic gas (CO 2 and SO 2 ) is the trigger for a truly major biotic catastrophe. Warming and marine anoxia feature in many extinction scenarios, indicating that the ability of a large igneous province to induce these proximal killers (from CO 2 emissions and thermogenic greenhouse gases) is the single most important factor governing its lethality. Intriguingly, many voluminous large igneous province eruptions, especially those of the Cretaceous oceanic plateaus, are not associated with significant extinction losses. This suggests that the link between the two phenomena may be controlled by a range of factors, including continental configuration, the latitude, volume, rate, and duration of eruption, its style and setting (continental vs. oceanic), the preexisting climate state, and the resilience of the extant biota to change
Ultra-shallow-marine anoxia in an Early Triassic shallow-marine clastic ramp (Spitsbergen) and the suppression of benthic radiation
Lower Triassic marine strata in Spitsbergen accumulated on a mid-to-high latitude ramp in which high-energy foreshore and shoreface facies passed offshore into sheet sandstones of probable hyperpycnite origin. More distal facies include siltstones, shales and dolomitic limestones. Carbon isotope chemostratigraphy comparison allows improved age dating of the Boreal sections and shows a significant hiatus in the upper Spathian. Two major deepening events, in earliest Griesbachian and late Smithian time, are separated by shallowing-upwards trends that culminated in the Dienerian and Spathian substages. The redox record, revealed by changes in bioturbation, palaeoecology, pyrite framboid content and trace metal concentrations, shows anoxic phases alternating with intervals of better ventilation. Only Dienerian–early Smithian time witnessed persistent oxygenation that was sufficient to support a diverse benthic community. The most intensely anoxic, usually euxinic, conditions are best developed in offshore settings, but at times euxinia also developed in upper offshore settings where it is even recorded in hyperpycnite and storm-origin sandstone beds: an extraordinary facet of Spitsbergen's record. The euxinic phases do not track relative water depth changes. For example, the continuous shallowing upwards from the Griesbachian to lower Dienerian was witness to several euxinic phases separated by intervals of more oxic, bioturbated sediments. It is likely that the euxinia was controlled by climatic oscillations rather than intra-basinal factors. It remains to be seen if all the anoxic phases found in Spitsbergen are seen elsewhere, although the wide spread of anoxic facies in the Smithian/Spathian boundary interval is clearly a global event
Bio-inspired laminate design exhibiting pseudo-ductile (graceful) failure during flexural loading
Lower Wenlock black shales in the northern Holy Cross Mountains, Poland: Sedimentary and geochemical controls on the Ireviken Event in a deep marine setting
The stratigraphic variability and geochemistry of Llandovery/Wenlock (L/W) Series boundary sediments in Poland reveals that hemipelagic sedimentation under an anoxic/euxinic water column was interrupted by low density bottom currents or detached diluted turbid layers that resulted in intermittent seafloor oxygenation. TOC values and inorganic proxies throughout the Wilków 1 borehole section suggest variable redox conditions. U/Mo ratios >1 throughout much of the Aeronian and Telychian Stages, together with an absence of pyrite framboids, suggests oxygenated conditions prevailed. However, elevated TOC near the Aeronian/Telychian boundary, together with increased U/Th and V/(V+Ni) ratios and populations of small pyrite framboids are consistent with the development of dysoxic/anoxic conditions at that time. U/Th, V/Cr and V/(V+Ni) ratios, as well as Uauthig and Mo concentrations suggest that during the Ireviken black shale (IBS) deposition, bottom-water conditions deteriorated from oxic during the Telychian to mostly suboxic/anoxic immediately prior to the L/W boundary, before a brief reoxygenation at the end of the IBS sedimentation in the Sheinwoodian Stage. Rapid fluctuations in U/Mo during the Ireviken Event (IE) are characteristic of fluctuating redox conditions that culminated in an anoxic/euxinic seafloor in the Sheinwoodian. Following IBS deposition, conditions once again became oxygen deficient with the development of a euxinic zone in the water column. The Aeronian to Sheinwoodian deep-water redox history was unstable, and rapid fluctuations of the chemocline across the L/W Series boundary probably contributed to the IE extinctions, which affected mainly pelagic and hemipelagic fauna
- …