Superior flow for bridge to life with self-expanding venous cannulas

Background: Recently, a compact cardiopulmonary support (CPS) system designed for quick set-up for example, during emergency cannulation, has been introduced. Traditional rectilinear percutaneous cannulas are standard for remote vascular access with the original design. The present study was designed to assess the potential of performance increase by the introduction of next-generation, self-expanding venous cannulas, which can take advantage of the luminal width of the venous vasculature despite a relatively small access orifice. Methods: Veno-arterial bypass was established in three bovine experiments (69 ± 10 kg). The Lifebridge® (Lifebridge GmbH, Munich, Germany) system was connected to the right atrium in a trans-jugular fashion with various venous cannulas; and the oxygenated blood was returned through the carotid artery with a 17 F percutaneous cannula. Two different venous cannulas were studied, and the correlation between the centrifugal pump speed (1500-3900 RPM), flow and the required negative pressure on the venous side was established: (A) Biomedicus 19 F (Medtronic, Tolochenaz, Switzerland); (B) Smart canula 18 F/36 F (Smartcanula LLC, Lausanne, Switzerland). Results: At 1500 RPM, the blood flow was 0.44 ± 0.26 l min−1 for the 19 F rectilinear cannula versus 0.73 ± 0.34 l min−1 for the 18/36 F self-expanding cannula. At 2500 RPM the blood flow was 1.63 ± 0.62 l min−1 for the 19 F rectilinear cannula versus 2.13 ± 0.34 l min−1 for the 18/36 F self-expanding cannula. At 3500 RPM, the blood flow was 2.78 ± 0.47 l min−1 for the 19 F rectilinear cannula versus 3.64 ± 0.39 l min−1 for the 18/36 F self-expanding cannula (p ≪ 0.01 for 18/36 F vs 19 F). At 1500 RPM, the venous line pressure was 18 ± 8 mmHg for the 19 F rectilinear cannula versus 19 ± 5 mmHg for the 18/36 F self-expanding cannula. At 2500 RPM the venous line pressure accounted for −22 ± 32 mmHg for the 19 F rectilinear cannula versus 2 ± 5 mmHg for the 18/36 F self-expanding cannula. At 3500 RPM, the venous line pressure was −112 ± 42 mmHg for the rectilinear cannula versus 28 ± 7 mmHg for the 18/36 F self-expanding cannula (p ≪ 0.01 for 18 F/36 F vs 19 F). Conclusions: The negative pressure required to achieve adequate venous drainage with the self-expanding venous cannula accounts for approximately 31% of the pressure necessary with the 19 F rectilinear cannula. In addition, a pump flow of more than 4 l min−1 can be achieved with the self-expanding design and a well-accepted negative inlet pressure for minimal blood trauma of less than 50 mmH

A new self-expanding aortic stent valve with annular fixation: in vitro haemodynamic assessment

Objective: Balloon-expandable stent valves require flow reduction during implantation (rapid pacing). The present study was designed to compare a self-expanding stent valve with annular fixation versus a balloon-expandable stent valve. Methods: Implantation of a new self-expanding stent valve with annular fixation (Symetis®, Lausanne, Switzerland) was assessed versus balloon-expandable stent valve, in a modified Dynatek Dalta® pulse duplicator (sealed port access to the ventricle for transapical route simulation), interfaced with a computer for digital readout, carrying a 25 mm porcine aortic valve. The cardiovascular simulator was programmed to mimic an elderly woman with aortic stenosis: 120/85 mmHg aortic pressure, 60 strokes/min (66.5 ml), 35% systole (2.8 l/min). Results: A total of 450 cardiac cycles was analysed. Stepwise expansion of the self-expanding stent valve with annular fixation (balloon-expandable stent valve) resulted in systolic ventricular increase from 120 to 121 mmHg (126 to 830 ± 76 mmHg)*, and left ventricular outflow obstruction with mean transvalvular gradient of 11 ± 1.5 mmHg (366 ± 202 mmHg)*, systolic aortic pressure dropped distal to the valve from 121 to 64.5 ± 2 mmHg (123 to 55 ± 30 mmHg) N.S., and output collapsed to 1.9 ± 0.06 l/min (0.71 ± 0.37 l/min* (before complete obstruction)). No valve migration occurred in either group. (* = p < 0.05). Conclusions: Implantation of this new self-expanding stent valve with annular fixation has little impact on haemodynamics and has the potential for working heart implantation in vivo. Flow reduction (rapid pacing) is not necessar

A new self-expanding aortic stent valve with annular fixation: in vitro haemodynamic assessment.

OBJECTIVE: Balloon-expandable stent valves require flow reduction during implantation (rapid pacing). The present study was designed to compare a self-expanding stent valve with annular fixation versus a balloon-expandable stent valve. METHODS: Implantation of a new self-expanding stent valve with annular fixation (Symetis, Lausanne, Switzerland) was assessed versus balloon-expandable stent valve, in a modified Dynatek Dalta pulse duplicator (sealed port access to the ventricle for transapical route simulation), interfaced with a computer for digital readout, carrying a 25 mm porcine aortic valve. The cardiovascular simulator was programmed to mimic an elderly woman with aortic stenosis: 120/85 mmHg aortic pressure, 60 strokes/min (66.5 ml), 35% systole (2.8 l/min). RESULTS: A total of 450 cardiac cycles was analysed. Stepwise expansion of the self-expanding stent valve with annular fixation (balloon-expandable stent valve) resulted in systolic ventricular increase from 120 to 121 mmHg (126 to 830+/-76 mmHg)*, and left ventricular outflow obstruction with mean transvalvular gradient of 11+/-1.5 mmHg (366+/-202 mmHg)*, systolic aortic pressure dropped distal to the valve from 121 to 64.5+/-2 mmHg (123 to 55+/-30 mmHg) N.S., and output collapsed to 1.9+/-0.06 l/min (0.71+/-0.37 l/min* (before complete obstruction)). No valve migration occurred in either group. (*=p&lt;0.05). CONCLUSIONS: Implantation of this new self-expanding stent valve with annular fixation has little impact on haemodynamics and has the potential for working heart implantation in vivo. Flow reduction (rapid pacing) is not necessary