Titanium dioxide/silver nanoparticle bilayers prepared in self-assembly processes

A new method for the preparation of TiO2/Ag bilayers via colloid self-assembly process using well-characterized titanium dioxide and silver suspensions was developed. The titanium dioxide nanoparticles, forming a supporting layer, were 46 nm in diameter, exhibiting an isoelectric point at pH 6.4. The silver nanoparticles, forming an external layer of the diameter of 50 nm were prepared via a chemical reduction method with the presence inorganic phosphate salts. The electrophoretic mobility measurements revealed that the zeta potential of silver nanoparticles was highly negative for a broad range of pH and ionic strengths. By explaining this information, the optimum condition for the silver nanoparticle immobilization on TiO2 supporting layers were selected. The coverage of the first layer was adjusted by ionic strength of the suspensions and by the deposition time. Afterward, the silver nanoparticle monolayers of controlled coverage were deposited under the diffusion-controlled transport. Their coverage was determined by a direct enumeration of deposited nanoparticles from AFM images and SEM micrographs. The experimental results showed that for extended deposition times, the coverage of silver nanoparticle layers significantly increases with ionic strength. Therefore, it was proven that the formation of bilayers is mainly controlled by electrostatic interactions and that it is feasible to produce uniform TiO2/Ag materials of desired coverage and structure

New organic-inorganic hybrid compounds based on sodium peroxidomolybdates (VI) and derivatives of pyridine acids : structure determination and catalytic properties

Two organic-inorganic hybrids based on sodium peroxidomolybdates(VI) and 3,5-dicarboxylic pyridine acid (Na-35dcpa) or N-oxide isonicotinic acid (Na-isoO) have been synthesized and characterized. All compounds contain inorganic parts: a pentagonal bipyramid with molybdenum center, and an organic part containing 3,5-dicarboxylic pyridine acid or N-oxide isonicotinic acid moieties. The type of organic part used in the synthesis influences the crystal structure of obtained compounds. This aspect can be interesting for crystal engineering. Crystal structures were determined using powder X-ray diffraction or single crystal diffraction for compounds Na-35dcpa and Na-isoO, respectively. Elemental analysis was used to check the purity of the obtained compounds, while X-ray Powder Diffraction (XRPD) vs. temp. was applied to verify their stability. Moreover, all the compounds were examined by Infrared (IR) spectroscopy. Their catalytic activity was tested in the Baeyer–Villiger (BV) oxidation of cyclohexanone to ε-caprolactone in the oxygen-aldehyde system. The highest catalytic activity in the BV oxidation was observed for Na-35dcpa. The compounds were also tested for biological activity on human normal cells (fibroblasts) and colon cancer cell lines (HT-29, LoVo, SW 620, HCT 116). All compounds were cytotoxic against tumor cells with metastatic characteristics, which makes them interesting and promising candidates for further investigations of specific anticancer mechanisms

Composites of Montmorillonite and Titania Nanoparticles Prepared by Inverse Microemulsion Method: Physico-Chemical Characterization

TiO2/montmorillonite composites were synthesized using inverse micellar route for the preparation of titania nanoparticles (4–6 nm diameter) in 1-hexanol and for the dispersion of one of the clay components. Two series of composites were obtained: one derived from cetyltrimethylammonium organomontmorillonite (CTA-Mt), exfoliated in 1-hexanol, and the other from sodium form of montmorillonite (Na-Mt) dispersed by formation of an inverse microemulsion in 1-hexanol. The TiO2 content ranged from 16 to 64 wt.%. The composites were characterized with X-ray diffraction, scanning/transmission electron microscopy/energy dispersive X-ray spectroscopy, thermal analysis, and N2 adsorption-desorption isotherms. The Na-Mt-derived component was shown to undergo transformation to CTA-Mt, as indicated by basal spacing of 17.5 nm, due to the interaction with the CTABr surfactant in inverse microemulsion. It was also better dispersed and intermixed with TiO2 nanoparticles. As a result, the TiO2/Na-Mt series displayed superior textural properties, with specific surface area up to 256 m2g−1 and pore volume up to 0.247 cm3g−1 compared with 208 m2g−1 and 0.231 cm3g−1, respectively, for the TiO2/CTA-Mt counterpart. Members of both series were uniformly mesoporous, with the dominant pore size around 5 nm, i.e., comparable with the dimensions of titania nanoparticles. The advantage of the adopted synthesis method is discussed in the context of other preparative procedures used for manufacturing of titania-clay composites

Synthesis of Nanocrystalline Mg-Al Hydrotalcites in the Presence of Starch—the Effect on Structure and Composition

The study describes the synthesis of Mg-Al hydrotalcite (Ht) with the use of starch as a structure controlling biotemplate. Syntheses were carried out at room temperature, by co-precipitation at pH = 10. The investigated synthesis parameters included the nature of the precipitating agent (NaOH/Na2CO3 or NH3aq/(NH4)2CO3), the nature of starch (potato, corn and cassava), the method of starch addition to reagents, the method of drying and the effect of washing. The materials were examined with X-ray diffraction, scanning electron microscopy/energy dispersive X-ray spectroscopy and infrared spectroscopy. The data show that synthesis of Ht materials in the presence of starch, with use of the ammonia-based precipitant, enabled preparation of nanocrystalline Ht with very fine (<50 nm) particle size. All investigated starches had a similar effect on the crystallinity and the grain size of Ht precipitates. Ht with the smallest nanocrystals was obtained when starch was present in all solutions used for synthesis, and the final product subjected to freeze drying. Washing with water was found to enhance recrystallization and exchange of nitrates for carbonates. Infrared spectra showed that an interaction exists between the biopolymer template and the Ht particles, resulting in a higher degree of order within the Ht-adhering starch component

Fine Crystalline Mg-Al Hydrotalcites as Catalysts for Baeyer-Villiger Oxidation of Cyclohexanone with H2O2

The catalytic activity of Mg-Al hydrotalcite (HT) materials in base-catalyzed reactions is known to be promoted by the low crystallinity of the HT solid. In the present work, two routes enabling the preparation of finely crystalline Mg-Al HT materials were explored: (1) the inverse microemulsion technique, and (2) co-precipitation in the presence of starch. Carbonate, chloride and bromide forms of HT were prepared, examined with X-ray diffraction, scanning electron microscopy/energy dispersive X-ray spectroscopy and infrared spectroscopy, and used as catalysts in the Baeyer–Villiger oxidation of cyclohexanone to ε-caprolactone with a H2O2/acetonitrile system. The bromide forms proved significantly less active than the chlorides and carbonates, as they promoted nonselective consumption of H2O2. The fine crystalline materials were more active than the more crystalline HT references obtained by conventional co-precipitation. Catalysts prepared by inverse microemulsion were less crystalline and more active than the starch-templated ones, but suffered stronger deactivation by the acidic reaction environment. Alkalization of the reaction medium with NaHCO3 stabilized the HT materials and increased the ε-caprolactone yield, which became comparable for both types of fine crystalline catalysts—thus pointing to the synthesis involving a simple and cheap starch templating approach as being a particularly attractive one