Equivalence Study of a Dental Anatomy Computer-Assisted Learning Program

Tooth Morphology is a computer-assisted learning program designed to teach the anatomy of the adult dentition. The purpose of this study was to test whether Tooth Morphology could teach dental anatomy to first-year dental students as well as the traditional lecture. A randomized controlled trial was performed with forty-five first-year dental students. The students were randomly assigned to either the Tooth Morphology group (n=23), which used the computer-assisted learning program and did not attend lecture, or the lecture group (n=22), which attended the traditional lecture and did not useTooth Morphology. The Tooth Morphology group had a final exam average of 90.0 (standard deviation=5.2), and the lecture group had a final exam average of 90.9 (sd=5.3). Analysis showed that the two groups’ scores were statistically equivalent (p\u3c0.05), with a priori equivalence bounds around the difference between the groups set at +/−5 points. It was concluded that Tooth Morphology taught the anatomy of the adult dentition as well as traditional lecture, as measured by exams. Based on the results of this study and student feedback, Tooth Morphology, in combination with interactive class meetings, has replaced the traditional dental anatomy lectures

Effect of Nedocromil Sodium on Aspecific Bronchial Hyper-Reactivity in Asthmatic Children

The purpose of this study was to evaluate whether nedocromil sodium benefits urban asthmatic children showing seasonal bronchial hyper-reactivity to ultrasonic nebulization of distilled water (UNDW). A prospective, randomized, placebo-controlled, parallel-group, double-blind study was carried out at the outpatient pulmonology service at a tertiary-care teaching hospital. Twelve children living in Milan, who were 7–17 years of age, who were SPT and RAST-negative to perennial allergens, who were suffering from episodic asthma, and showing seasonal bronchial hyper-reactivity to UNDW during winter, participated in this study. All the children received either placebo or nedocromil sodium, 4 mg every 6 h for 6 weeks. Spirometry and UNDW challenge were done at the following times: day−7; day 0; day 1; day 7; day 14; day 28; day 42. No differences were found in the basal spirometric parameters, which were normal in both nedocromil and placebo groups. Bronchial reactivity to UNDW was found to be significantly decreased in the group treated with nedocromtl starting from day 7. It is therefore concluded that nedocromil sodium can reverse bronchial hyper-reactivity caused by seasonal factors such as cold, viral infections and atmospheric pollutants in children suffering from asthma

Flexible access to conformationally-locked bicyclic morpholines

A preparatively accessible route to a series of conformationally-locked bicyclic morpholines has been developed. This flexible approach allows for diversification in order for a small array of lead-like scaffolds to be synthesised from readily available key building blocks

Estimating degree-day factors of snow based on energy flux components

Meltwater from mountainous catchments dominated by snow and ice is a valuable source of fresh water in many regions. At mid-latitudes, seasonal snow cover and glaciers act like a natural reservoir by storing precipitation during winter and releasing it in spring and summer. Snowmelt is usually modelled either by energy balance or by temperature-index approaches. The energy balance approach is process-based and more sophisticated but requires extensive input data, while the temperature-index approach uses the degree-day factor (DDF) as a key parameter to estimate melt of snow and ice merely from air temperature. Despite its simplicity, the temperature-index approach has proved to be a powerful tool for simulating the melt process especially in large and data-scarce catchments. The present study attempts to quantify the effects of spatial, temporal, and climatic conditions on the DDF of snow in order to gain a better understanding of which influencing factors are decisive under which conditions. The analysis is based on the individual energy flux components; however, formulas for estimating the DDF are presented to account for situations where observed data are limited. A detailed comparison between field-derived and estimated DDF values yields a fair agreement with bias = 0.14 mm ∘C−1 d−1 and root mean square error (RMSE) = 1.12 mm ∘C−1 d−1. The analysis of the energy balance processes controlling snowmelt indicates that cloud cover and snow albedo under clear sky are the most decisive factors for estimating the DDF of snow. The results of this study further underline that the DDF changes as the melt season progresses and thus also with altitude, since melting conditions arrive later at higher elevations. A brief analysis of the DDF under the influence of climate change shows that the DDFs are expected to decrease when comparing periods of similar degree days, as melt will occur earlier in the year when solar radiation is lower, and albedo is then likely to be higher. Therefore, the DDF cannot be treated as a constant parameter especially when using temperature-index models for forecasting present or predicting future water availability.</p

Genetic analysis of tolerance to the root lesion nematode Pratylenchus neglectus in the legume Medicago littoralis

BACKGROUND: The nematode Pratylenchus neglectus has a wide host range and is able to feed on the root systems of cereals, oilseeds, grain and pasture legumes. Under the Mediterranean low rainfall environments of Australia, annual Medicago pasture legumes are used in rotation with cereals to fix atmospheric nitrogen and improve soil parameters. Considerable efforts are being made in breeding programs to improve resistance and tolerance to Pratylenchus neglectus in the major crops wheat and barley, which makes it vital to develop appropriate selection tools in medics. RESULTS: A strong source of tolerance to root damage by the root lesion nematode (RLN) Pratylenchus neglectus had previously been identified in line RH-1 (strand medic, M. littoralis). Using RH-1, we have developed a single seed descent (SSD) population of 138 lines by crossing it to the intolerant cultivar Herald. After inoculation, RLN-associated root damage clearly segregated in the population. Genetic analysis was performed by constructing a genetic map using simple sequence repeat (SSR) and gene-based SNP markers. A highly significant quantitative trait locus (QTL), QPnTolMl.1, was identified explaining 49% of the phenotypic variation in the SSD population. All SSRs and gene-based markers in the QTL region were derived from chromosome 1 of the sequenced genome of the closely related species M. truncatula. Gene-based markers were validated in advanced breeding lines derived from the RH-1 parent and also a second RLN tolerance source, RH-2 (M. truncatula ssp. tricycla). Comparative analysis to sequenced legume genomes showed that the physical QTL interval exists as a synteny block in Lotus japonicus, common bean, soybean and chickpea. Furthermore, using the sequenced genome information of M. truncatula, the QTL interval contains 55 genes out of which five are discussed as potential candidate genes responsible for the mapped tolerance. CONCLUSION: The closely linked set of SNP-based PCR markers is directly applicable to select for two different sources of RLN tolerance in breeding programs. Moreover, genome sequence information has allowed proposing candidate genes for further functional analysis and nominates QPnTolMl.1 as a target locus for RLN tolerance in economically important grain legumes, e.g. chickpea.Klaus H Oldach, David M Peck, Ramakrishnan M Nair, Maria Sokolova, John Harris, Paul Bogacki, and Ross Ballar

Rhizoctonia solani AG8: New breakthroughs in control and management

The next generation of control options for Rhizoctonia solani (AG8), the causal agent of Rhizoctonia root rot, is in-furrow liquid injection. The efficacy of banding two new fungicides, Uniform® and EverGol® Prime, was evaluated as an alternative to seed treatments across three years of trials conducted in Western Australia (WA) by DAFWA and in South Australia (SA) by SARDI

Construction and Modelling of an Inducible Positive Feedback Loop Stably Integrated in a Mammalian Cell-Line

Understanding the relationship between topology and dynamics of transcriptional regulatory networks in mammalian cells is essential to elucidate the biology of complex regulatory and signaling pathways. Here, we characterised, via a synthetic biology approach, a transcriptional positive feedback loop (PFL) by generating a clonal population of mammalian cells (CHO) carrying a stable integration of the construct. The PFL network consists of the Tetracycline-controlled transactivator (tTA), whose expression is regulated by a tTA responsive promoter (CMV-TET), thus giving rise to a positive feedback. The same CMV-TET promoter drives also the expression of a destabilised yellow fluorescent protein (d2EYFP), thus the dynamic behaviour can be followed by time-lapse microscopy. The PFL network was compared to an engineered version of the network lacking the positive feedback loop (NOPFL), by expressing the tTA mRNA from a constitutive promoter. Doxycycline was used to repress tTA activation (switch off), and the resulting changes in fluorescence intensity for both the PFL and NOPFL networks were followed for up to 43 h. We observed a striking difference in the dynamics of the PFL and NOPFL networks. Using non-linear dynamical models, able to recapitulate experimental observations, we demonstrated a link between network topology and network dynamics. Namely, transcriptional positive autoregulation can significantly slow down the “switch off” times, as comparared to the nonautoregulatated system. Doxycycline concentration can modulate the response times of the PFL, whereas the NOPFL always switches off with the same dynamics. Moreover, the PFL can exhibit bistability for a range of Doxycycline concentrations. Since the PFL motif is often found in naturally occurring transcriptional and signaling pathways, we believe our work can be instrumental to characterise their behaviour

Review of Matrix Metalloproteinases’ Effect on the Hybrid Dentin Bond Layer Stability and Chlorhexidine Clinical Use to Prevent Bond Failure

This review describes the relationship between dentin collagen hybrid bond layer degradation and the Matrix Metalloproteinases (MMPs) after their release by acid etch and rinse adhesives and self etching bonding adhesives that can reduce the bond stability over time. MMP-2, MMP-8 and MMP-9 are indicated as the active proteases that breakdown the collagen fibrils in the hybrid bond layer. Phosphoric acid in the acid etch and rinse bonding process and acid primers in the self etch process are implicated in the release of these proteases and their activation by several non-collagen proteins also released from dentin by the etching. MMPs are released in saliva by salivary glands, by cells in the gingival crevices to crevicular fluid and by pulpal odontoblasts cells to the dentinal fluids. These sources may affect the hybrid layer also. Evidence of the bond strength deterioration over time and the ability of Chlorhexidine to prevent bond deterioration by inhibiting MMP action are discussed. Dentin Bonding procedure utilizing Chlorhexidine for different application times and concentrations are being developed. The application of 2% Chlorhexidine to the phosphoric acid etch surface after rinsing off the acid is the only procedure that has been clinically tested for a longer period of time and shown to prevent bond strength degradation so far. The adoption of this procedure is recommended as means of improving bond stability at this time