Oxygen Abundances in Two Metal-Poor Subgiants from the Analysis of the 6300 A Forbidden O I Line

Recent LTE analyses (Israelian et al. 1998 and Bosegaard et al. 1999) of the OH bands in the optical-ultraviolet spectra of nearby metal-poor subdwarfs indicate that oxygen abundances are generally higher than those previously determined. The difference increases with decreasing metallicity and reaches delta([O/Fe]) ~ +0.6 dex as [Fe/H] approaches -3.0. Employing high resolution (R = 50000), high S/N (~ 250) echelle spectra of the two stars found by Israelian et al. (1998) to have the highest [O/Fe]-ratios, viz, BD +23 3130 and BD +37 1458, we conducted abundance analyses based on about 60 Fe I and 7-9 Fe II lines. We determined from Kurucz LTE models the values of the stellar parameters, as well as abundances of Na, Ni, and the traditional alpha-elements, independent of the calibration of color vs $T_{eff}$ scales. We determined oxygen abundances from spectral synthesis of the stronger line (6300 A) of the [O I] doublet. The syntheses of the [O I] line lead to smaller values of [O/Fe], consistent with those found earlier among halo field and globular cluster giants. We obtain [O/Fe] = +0.35 +/- 0.2 for BD +23 3130 and +0.50 +/- 0.2 for BD +37 1458. In the former, the [O I] line is very weak (~ 1 mA), so that the quoted [O/Fe] value may in reality be an upper limit. Therefore in these two stars a discrepancy exists between the [O/Fe]- ratios derived from [O I] and the OH feature, and the origin of this difference remains unclear. Until the matter is clarified, we suggest it is premature to conclude that the ab initio oxygen abundances of old, metal-poor stars need to be revised drastically upward.Comment: 38 pages, 5 tables, 14 figures To appear in July 1999 AJ Updated April 16, 1999. Fixed typo

Cooler and bigger than thought? Planetary host stellar parameters from the InfraRed Flux Method

Effective temperatures and radii for 92 planet-hosting stars as determined from the InfraRed Flux Method (IRFM) are presented and compared with those given by other authors using different approaches. The IRFM temperatures we have derived are systematically lower than those determined from the spectroscopic condition of excitation equilibrium, the mean difference being as large as 110 K. They are, however, consistent with previous IRFM studies and with the colors derived from Kurucz and MARCS model atmospheres. Comparison with direct measurements of stellar diameters for 7 dwarf stars, which approximately cover the range of temperatures of the planet-hosting stars, suggest that the IRFM radii and temperatures are reliable in an absolute scale. A better understanding of the fundamental properties of the stars with planets will be achieved once this discrepancy between the IRFM and the spectroscopic temperature scales is resolved.Comment: 15 pages, 4 figures. Accepted for publication in Ap

Improved Laboratory Transition Probabilities for Neutral Chromium and Re-determination of the Chromium Abundance for the Sun and Three Stars

Branching fraction measurements from Fourier transform spectra in conjunction with published radiative lifetimes are used to determine transition probabilities for 263 lines of neutral chromium. These laboratory values are employed to derive a new photospheric abundance for the Sun: log $\epsilon$(Cr I)$_{\odot}$ = 5.64$\pm$0.01 ($\sigma = 0.07$). These Cr I solar abundances do not exhibit any trends with line strength nor with excitation energy and there were no obvious indications of departures from LTE. In addition, oscillator strengths for singly-ionized chromium recently reported by the FERRUM Project are used to determine: log $\epsilon$(Cr II)$_{\odot}$ = 5.77$\pm$0.03 ($\sigma = 0.13$). Transition probability data are also applied to the spectra of three stars: HD 75732 (metal-rich dwarf), HD 140283 (metal-poor subgiant), and CS 22892-052 (metal-poor giant). In all of the selected stars, Cr I is found to be underabundant with respect to Cr II. The possible causes for this abundance discrepancy and apparent ionization imbalance are discussed.Comment: 44 pages, 6 figure

A Study of the B-V Colour Temperature Relation

We attempt to construct a B-V colour temperature relation for stars in the least model dependent way employing the best modern data. The fit we obtained with the form Teff = Teff((B-V)0,[Fe/H],log g) is well constrained and a number of tests show the consistency of the procedures for the fit. Our relation covers from F0 to K5 stars with metallicity [Fe/H] = -1.5 to +0.3 for both dwarfs and giants. The residual of the fit is 66 K, which is consistent with what are expected from the quality of the present data. Metallicity and surface gravity effects are well separated from the colour dependence. Dwarfs and giants match well in a single family of fit, differing only in log g. The fit also detects the Galactic extinction correction for nearby stars with the amount E(B-V) = 0.26 +/-0.03 mag/kpc. Taking the newly obtained relation as a reference we examine a number of B-V colour temperature relations and atmosphere models available in the literature. We show the presence of a systematic error in the colour temperature relation from synthetic calculations of model atmospheres; the systematic error across K0 to K5 dwarfs is 0.04-0.05 mag in B-V, which means 0.25-0.3 mag in Mv for the K star range. We also argue for the error in the temperature scale used in currently popular stellar population synthesis models; synthetic colours from these models are somewhat too blue for aged elliptical galaxies. We derive the colour index of the sun (B-V)sun = 0.627 +/-0.018, and discuss that redder colours (e.g., 0.66-0.67) often quoted in the literature are incompatible with the colour-temperature relation.Comment: AASLaTeX (aaspp4.sty),36 pages (13 figures included), submitted to Astronomical Journal, replaced (typo in author name

Prediction of hole expansion ratio of titanium alloys using R programming

The hole expansion ratio (HER) is an important material property which defines the extent of edge formability of sheet metals. The stress states observed at the hole edge after the hole expansion test are similar to those seen during traditional uniaxial tensile deformation. This observation has provoked research, directed at ascertaining a correlation between the HER and tensile properties. In order to account for the forming behaviour of complex materials like titanium, a highly robust model that takes into account the material formability in all sheet-processing directions must be considered. The R programming language was used in this research to build a model fitting expression capable of predicting the HER as well as generating a regression model equation for titanium alloys, based on their thickness and Erichsen index number. The proposed regression model equation for predicting HER of titanium alloys exhibited an excellent statistical significance (p= 0.00076), indicating the robustness of the model fitting expression to predict HER values of titanium alloys. An accompanying adjusted R squared value of 0.9987 for the generated regression model equation also shows how well the regression line fits the data for accurate prediction of the HER of titanium alloys. A numerical validation analysis of the strength of the relationship derived between the predicted and the experimental HERs gave a correlation coefficient of 0.9884. This result shows a strong linear relationship between the experimental and predicted HER values of the titanium alloys with an average absolute error of 8.8%

Impact of machining induced surface defects on the edge formability of commercially pure titanium sheet at room temperature

Despite the good properties of titanium which have drawn the interest of various industries over the years, one of the major drawbacks of this material is its poor machinability. This has largely been attributed to its low thermal conductivity and elastic modulus. The ability to attain optimum sheet edge performance during forming is dependent on the quality of the edges produced. Also, the demanding nature of aerospace part design has provoked the interest of both industry and academia to continually explore avenues tailored at enhancing part performance. The sort of edge surface integrity produced for aerospace part fabrication thus becomes a vital consideration in the quest to ensuring prime performance of components. This work seeks to study the influence of different machining induced surface defects on the sheet edge performance of CP-Ti (Grade 2) at room temperature. Hole expansion test was used to assess the edge surface formability of CP-Ti with different machining induced edge defects. The research found that, machining induced surface defects act as stress concentration sites during the hole expansion test and have a major impact on the material flow. Electro-discharge machined edges were observed to exhibit high edge formability compared to laser and abrasive water jet cut edges due to the impact of machining induced microstructural changes

An unusual initial presentation of mantle cell lymphoma arising from the lymphoid stroma of warthin tumor.

BackgroundWarthin tumors presenting concomitantly with a lymphoma is vanishingly rare with only 15 reported cases in English literature. Herein, we report an unusual initial presentation of a mantle cell lymphoma involving the lymphoid stroma of a Warthin tumor.Case presentationA seventy-seven year old otherwise healthy gentleman with a 50-pack year smoking history presents with a slowly enlarging left cheek mass. CT scan of the neck demonstrated a left parotid gland tumor measuring 3.4 cm in greatest dimension. He underwent a left superficial parotidectomy, with subsequent histopathologic examination revealing a Warthin tumor with extensive expansion of the lymphoid stroma. Flow cytometric, immunohistochemical, and cytogenetic studies of the stromal component of the tumor confirmed the presence of a mantle cell lymphoma. Clinical staging demonstrated stage IVa disease, and was considered to be at low to intermediate risk due to the slow growth of the parotid lesion. The patient is undergoing close follow up with repeat PET-CT scans at six months.ConclusionTo the best of our knowledge, this is the first well documented collision tumor between mantle cell lymphoma and a Warthin tumor. This case also brings to light the significance of thorough evaluation of the lymphoid component of Warthin tumor

Comparative judgments are more consistent than binary classification for labelling word complexity

© 2019 Association for Computational Linguistics Lexical simplification systems replace complex words with simple ones based on a model of which words are complex in context. We explore how users can help train complex word identification models through labelling more efficiently and reliably. We show that using an interface where annotators make comparative rather than binary judgments leads to more reliable and consistent labels, and explore whether comparative judgments may provide a faster way for collecting labels

Are young stars always associated with cold massive disks? A CO and millimeter interferometric continuum survey

The results of a combined millimeter-spectral-line and continuum survey of cold far-infrared sources selected to favor embedded young stars in the Galaxy are presented. The spectral-line observations were performed with the 5 meter antenna of the University of Texas Millimeter-Wave Observatory. High resolution continuum observations were obtained with the Owens Valley (OVRO) Millimeter-Wave Interferometer. The goal of the survey was to gain insight into the mass, temperature, and distribution of cold dust which envelopes stars during the earliest stages of their evolution. The first phase of our survey involved 1.2 arcmin resolution observations of CO-12 and CO-13 emission lines toward each source. All but two sources had detectable CO emission. We found that 40% of the sources appear to be associated with star formation as evidenced by the presence of enhanced CO-12 line widths or broad wings. At least five of these objects are associated with bipolar molecular outflows. The second phase of our survey involves high resolution 2.7 mm continuum observations with 3 interferometer baselines ranging from 15 to 55 m in length. Preliminary results indicate that about 25% of the sources in our sample have detectable continuum emission on scales less than 30 arcsec. The high percentage of sources with enhanced CO-12 line widths or broad wings indicates that a significant fraction of our samples, 40%, are likely to be young stars. The lower detection percentage in the continuum observations, 25%, suggest that such objects are not always surrounded by large concentrations of gas and dust. The continuum detection percentage for actual dust emission could be lower than that given above since emission from ionized gas could be responsible for the observed 2.7 mm emission in some objects. To get an understanding of the type of object detected in our survey, a map of one of the survey sources, L1689N, has been made using the OVRO mm interferometer

Abundances of 30 elements in 23 metal-poor stars

We report the abundances of 30 elements in 23 metal-poor ([Fe/H] <-1.7) giants. These are based on 7774 equivalent widths and spectral synthesis of 229 additional lines. Hyperfine splitting is taken into account when appropriate. Our choice of model atmospheres has the most influence on the accuracy of our abundances. We consider the effect of different model atmospheres on our results. In addition to the random errors in Teff, log g, and microturbulent velocity, there are several sources of systematic error. These include using Teff determined from FeI lines rather than colors, ignoring NLTE effects on the FeI/FeII ionization balance, using models with solar [alpha/Fe] ratios and using Kurucz models with overshooting. Of these, only the use of models with solar [alpha/Fe] ratios had a negligible effect. However, while the absolute abundances can change by > 0.10 dex, the relative abundances, especially between closely allied atoms such as the rare earth group, often show only small (<0.03 dex) changes. We found that some strong lines of FeI, MnI and CrI consistently gave lower abundances by ~0.2 dex, a number larger than the quoted errors in the gf values. After considering a model with depth-dependent microturbulent velocity and a model with hotter temperatures in the upper layers, we conclude that the latter did a better job of resolving the problem and agreeing with observational evidence for the structure of stars. The error analysis includes the effects of correlation of Teff, log g, and microturbulent velocity errors, which is crucial for certain element ratios, such as [Mg/Fe]. The abundances presented here are being analyzed and discussed in a separate series of papers.Comment: 27 pages, 9 figures, Table 2 included separately, to published in ApJ