Self-assembly of 3D fennel-like Co3O4 with thirty-six surfaces for high performance supercapacitor

Three-dimensional (3D) fennel-like cobalt oxide (II,III) (Co3O4) particles with thirty-six surfaces on nickel foams were prepared via a simple hydrothermal synthesis method and its growth process was also researched. The crystalline structure and morphology were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy. The Brunauer-Emmett Teller (BET) analysis revealed that 3D fennel-like Co3O4 particles have high specific surface area. Therefore, the special structure with thirty-six surfaces indicates the good electrochemical performance of the micron-nanometer material as electrode material for supercapacitors. The cyclic voltammetry (CV), galvanostatic charge-discharge, and electrochemical impedance spectroscopy (EIS) were conducted to evaluate the electrochemical performances. Compared with other morphological materials of the similar sizes, the Co3O4 particles on nickel foam exhibit a high specific capacitance of 384.375 F.g(-1) at the current density of 3A.g(-1) and excellent cycling stability of a capacitance retention of 96.54% after 1500 galvanostatic charge-discharge cycles in 6M potassium hydroxide (KOH) electrolyte

Hydrodynamic performance of a floating breakwater as an oscillating-buoy type wave energy converter

Combined floating breakwater and wave energy converter systems have the potential to provide a cost-effective solution to offshore power supply and coastal protection. This will make wave energy economically competitive and commercial-scale wave power operations possible. This paper investigates the hydrodynamic features of wave energy converters that meet the dual objectives of wave energy extraction and attenuation for such a combined system. A two-dimensional numerical model was established using Star-CCM+ commercial software based on viscous Computational Fluid Dynamics theory to investigate the hydrodynamic performance of an oscillating buoy Wave Energy Converter (WEC) type floating breakwater under regular waves. The model proposed in this paper was verified with published experimental results. The hydrodynamics of symmetric and asymmetric floaters were investigated to demonstrate their wave attenuation and energy extraction performance, including square bottomed, triangular bottomed (with and without a baffle plate), and the Berkley Wedge. The asymmetric floaters were found to have higher power conversion efficiency and better wave attenuation performance, especially the Berkeley Wedge bottom device and the triangular-baffle bottom device. The triangular-baffle bottom device with a simpler geometry achieved similar wave attenuation and energy extraction performance characteristics to that of the Berkeley Wedge device. The maximum energy conversion efficiency of the triangular-baffle bottom floater reached up to 93%, an impressive WEC device among many designs for wave energy conversion. There may be a great potential for this newly proposed triangular-baffle bottom WEC type of floater to be an ideal coastal structure for both coastal protection and wave energy extraction

Hydrodynamic performance of a dual-floater hybrid system combining a floating breakwater and an oscillating-buoy type wave energy converter

The high cost of power generation impedes commercial-scale wave power operations. The objective of this work is to provide a cost-sharing solution by combining wave energy extraction and coastal protection. A two-dimensional numerical wave tank was developed using Star-CCM+ Computational Fluid Dynamics software to investigate the hydrodynamic performance of a dual-floater hybrid system consisting of a floating breakwater and an oscillating-buoy type wave energy converter (WEC), and was compared with published experimental results. The differences between the hydrodynamic performance of the hybrid system, a single WEC and a single breakwater were compared. Wave resonance in the WEC-breakwater gap has a significant impact on system performance, with the hybrid system demonstrating both better wave attenuation and wave energy extraction capabilities at low wave frequencies, i.e., wider effective frequency. Forces on the breakwater were generally reduced due to the WEC. Wave resonance in the narrow gap has an adverse effect on the energy efficiency of the hybrid system with an asymmetric WEC, while a beneficial effect with a symmetric WEC. The wave energy conversion efficiency of hybrid system can be improved by increasing the draft and width of the WEC and decreasing the distance between the WEC and the breakwater. The findings of this paper make wave energy economically competitive and commercial-scale wave power operations possible

Optimal design and performance analysis of a hybrid system combining a semi-submersible wind platform and point absorbers

Integrating point absorber wave energy converters (PAWECs) and an offshore floating wind platform provide a cost-effective way of joint wind and wave energy exploitation. However, the coupled dynamics of the complicated hybrid system and its influence on power performance are not well understood. Here, a frequency-domain-coupled hydrodynamics, considering the constraints and the power output through the relative motion between the PAWECs and the semi-submersible platform, is introduced to optimize the size, power take-off damping, and layout of the PAWECs. Results show that the annual wave power generation of a PAWEC can be improved by 30% using a 90° conical or a hemispherical bottom instead of a flat bottom. Additionally, while letting the PAWECs protrude out the sides of the triangular frame of the platform by a distance of 1.5 times the PAWEC radius, the total power generation can be improved by up to 18.2% without increasing the motion response of the platform. The PAWECs can reduce the resonant heave motion of the platform due to the power take-off damping force. This study provides a reference for the synergistic use of wave and wind energ

Experimental and numerical study on a novel dual-resonance wave energy converter with a built-in power take-off system

A new concept of point-absorber wave energy converter (WEC) with a waterproof outer-floater and a built-in power take-off (BI-PTO) mechanism, named Dual-Resonance WEC (DR-WEC), is put forward and investigated by experiments and numerical simulations. The BI-PTO mechanism includes spring, sliding-mass and damping systems, where the spring system is the most complicated and should be designed specially. A 1:10 scale model is designed. The mechanical performance of the BI-PTO system is investigated by a bench test. The results have shown that the design is feasible, and the added inertia effect of the BI-PTO has a negative influence on the power output. The average mechanical efficiency of the BI-PTO is 65.8% with maximum up to 80.0%. The motion and power responses of the DR-WEC are studied by a wave tank experiment and a linear numerical model with corrected mechanical added mass and viscosity. The viscous added mass and damping correction coefficients are obtained by a free decay test. The good agreement between the experimental measurements and numerical simulations has indicated that the present numerical model with corrections is of enough accuracy and the effects of mooring system and other degree of freedoms on the heave motion and power responses can be ignored. (C) 2018 Elsevier Ltd. All rights reserved

Management and control software for ADSL modem

The objective of this project is to develop the MAPI software module to work with other software modules in the ADSL modem.Master of Science (Communication and Network Systems