Very Low Emittance Muon Beam using Positron Beam on Target

Muon beams are customarily obtained via K/π decays produced in proton interaction on target. In this paper we investigate the possibility to produce low emittance muon beams from electron-positron collisions at centre-of-mass energy just above the μ+μ- production threshold with maximal beam energy asymmetry, corresponding to a positron beam of about 45 GeV interacting on electrons on target. Performances on both amorphous and crystal target are presented, and the general scheme for the muon production will be given. We present the main features of this scheme with a first preliminary evaluation of the performances that could be achieved by a multi-TeV muon collider. Copyright © 2016 CC-BY-3.0 and by the respective authors

Low Emittance Muon Beams from Positrons

International audienceWe are studying a novel scheme to produce muon beams characterised by very low emittance, thus allowing to avoid the need for cooling, using a positron beam of about 45 GeV interacting on electrons on a fixed target. This is a challenging scheme, and a full design study has to be developed. One of the key innovative topics to be investigated regards the interaction between the positron beam stored in a low emittance ring with a thin target inserted directly in the ring cham- ber. Produced muons will then be immediately collected at the exit of the target and transported to two μ+ and μ− accumulator rings. In this paper, after an introduction highlighting the rational in designing a muon collider, we discuss in detail this new muon production scheme, covering the simulation of the e+ beam interacting with the target, its degradation in the 6-D phase space and the optimisation of the e+ ring design mainly to maximise the energy acceptance

The ThomX ICS source

International audienceThomX is a new generation Compact Compton Source. It is currently commissioned by and at the IJCLab (Laboratoire de physique des 2 infinis - Irène Joliot-Curie (UMR9012)) at Orsay. The first beam is expected at the begining of 2021. The aim of ThomX is to demonstrate the characteristics of an intense and Compact (lab-size) X-ray source based on Compton Scattering. The performances are mostly driven by the laser optical system which is above the state of the art of stored laser power. Proof of principle of various X-ray techniques will be performed thanks to the versatile ThomX beamline. Firstly, this article presents the machine description. Secondly, the issues and limits of the laser system are discussed. Then, the ThomX beamline is described and the machine status conclude the ThomX presentation. Finally, the expected performances for the next years and the possible experiments that can be made with this new machine are detailed

ILC Reference Design Report Volume 1 - Executive Summary

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization

ILC Reference Design Report Volume 4 - Detectors

This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics.This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics

ILC Reference Design Report Volume 3 - Accelerator

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC

International Linear Collider Reference Design Report Volume 2: PHYSICS AT THE ILC

This article reviews the physics case for the ILC. Baseline running at 500 GeV as well as possible upgrades and options are discussed. The opportunities on Standard Model physics, Higgs physics, Supersymmetry and alternative theories beyond the Standard Model are described.This article reviews the physics case for the ILC. Baseline running at 500 GeV as well as possible upgrades and options are discussed. The opportunities on Standard Model physics, Higgs physics, Supersymmetry and alternative theories beyond the Standard Model are described