3,086 research outputs found
Using pipe-in-pipe systems for subsea pipeline vibration control
Pipe-in-pipe (PIP) systems are increasingly used in subsea pipeline applications due to their favourable thermal insulation capacity. Pipe-in-pipe systems consist of concentric inner and outer pipes, the inner pipe carries hydrocarbons and the outer pipe provides mechanical protection to withstand the external hydrostatic pressure. The annulus between the inner and outer pipes is either empty or filled with non-structural insulation material. Due to the special structural layout, optimized springs and dashpots can be installed in the annulus and the system can be made as a structure-tuned mass damper (TMD) system, which therefore has the potential to mitigate the pipeline vibrations induced by various sources. This paper proposes using pipe-in-pipe systems for the subsea pipeline vibration control. The simplification of the pipe-in-pipe system as a non-conventional structure-TMD system is firstly presented. The effectiveness of using pipe-in-pipe system to mitigate seismic induced vibration of a subsea pipeline with a free span is investigated through numerical simulations by examining the seismic responses of both the traditional and proposed pipe-in-pipe systems based on the detailed three dimensional (3D) numerical analyses. Two possible design options and the robustness of the proposed system for the pipeline vibration control are discussed. Numerical results show that the proposed pipe-in-pipe system can effectively suppress seismic induced vibrations of subsea pipelines without changing too much of the traditional design. Therefore it could be a cost-effective solution to mitigate pipe vibrations subjected to external dynamic loadings
The effectiveness of using viscoelastic materials to reduce seismic induced vibrations of above ground pipelines
Pipeline systems are commonly used to transport oil, natural gas, water, sewage and other materials. They are normally regarded as important lifeline structures. Ensuring the safety of these pipeline systems is crucial to the economy and environment. There are many reasons that may result in the damages to pipelines and these damages are often associated with pipeline vibrations. Therefore it is important to control pipeline vibrations to reduce the possibility of catastrophic damages. This paper carries out numerical investigations on the effectiveness of using viscoelastic material layers to mitigate seismic induced vibrations of above ground pipelines. The numerical analyses are carried out by using the commercial finite element code ANSYS. The numerical model of the viscoelastic material is firstly calibrated based on the experimental data obtained from a 1.6m long tubular sandwich structure. The calibrated material model is then applied to the pipeline system. The effectiveness of using viscoelastic materials as the seismic vibration control solution is discussed
Diquark mass differences from unquenched lattice QCD
We calculate diquark correlation functions in the Landau gauge on the lattice
using overlap valence quarks and 2+1-flavor domain wall fermion configurations.
Quark masses are extracted from the scalar part of quark propagators in the
Landau gauge. Scalar diquark quark mass difference and axial vector scalar
diquark mass difference are obtained for diquarks composed of two light quarks
and of a strange and a light quark. Light sea quark mass dependence of the
results is examined. Two lattice spacings are used to check the discretization
effects. The coarse and fine lattices are of sizes and
with inverse spacings and , respectively.Comment: 9 figure
Numerical simulation on the effectiveness of using viscoelastic materials to mitigate seismic induced vibrations of above-ground pipelines
Pipeline systems are commonly used to transport oil, natural gas, water, sewage and other materials. They are normally regarded as important lifeline structures. Ensuring the safety of these pipeline systems is crucial to the economy and environment. There are many reasons that may result in the damages to pipelines and these damages are often associated with pipeline vibrations. Therefore it is important to control pipeline vibrations to reduce the possibility of catastrophic damages. This paper carries out numerical investigations on the effectiveness of using viscoelastic materials to mitigate the seismic induced vibrations of above-ground pipelines. The numerical analyses are carried out by using the commercial software package ANSYS. The numerical model of the viscoelastic material is firstly calibrated based on the experimental data obtained from vibration tests of a 1.6 m long tubular sandwich structure. The calibrated material model is then applied to the above-ground pipeline system. The effectiveness of using viscoelastic materials as the seismic vibration control solution is investigated. The influences of various parameters, including the constraining arrangement scenarios, the constraining length and angle, the thicknesses of the viscoelastic material and constraining layer are discussed in detail. The influence of earthquake frequency content is discussed as well. Numerical results show that with properly selected viscoelastic materials and constraining layers, the proposed method can be used to effectively mitigate seismic induced vibrations of above-ground pipelines
Modelling of shear keys in bridge structures under seismic loads
Shear keys are used in the bridge abutments and piers to provide transverse restraints for bridge superstructures. Owing to the relatively small dimensions compared to the main bridge components (girders, piers, abutments, piles), shear keys are normally regarded as secondary component of a bridge structure, and their influences on bridge seismic responses are normally neglected. In reality, shear keys are designed to restrain the lateral displacements of bridge girders, which will affect the transverse response of the bridge deck, thus influence the overall structural responses. To study the influences of shear keys on bridge responses to seismic ground excitations, this paper performs numerical simulations of the seismic responses of a two-span simply-supported bridge model without or with shear keys in the abutments and the central pier. A detailed 3D finite element (FE) model is developed by using the explicit FE code LS-DYNA. The bridge components including bridge girders, piers, abutments, bearings, shear keys and reinforcement bars are included in the model. The non-linear material behaviour including the strain rate effects of concrete and steel rebar are considered. The seismic responses of bridge structures without and with shear keys subjected to bi-axial spatially varying horizontal ground motions are calculated and compared. The failure mode and damage mechanism of shear keys are discussed in detail. Numerical results show that shear keys restrain transverse movements of bridge decks, which influence the torsional–lateral responses of the decks under bi-axial spatially varying ground excitations; neglecting shear keys in bridge response analysis may lead to inaccurate predictions of seismic responses of bridge structures
The Blueshift Of Civ Broad Emission Line In Qsos
For the sample from Ge et al. of 87 low- Palomar--Green (PG) quasi-stellar
objects (QSOs) and 130 high- QSOs () with \hb-based single-epoch
supermassive black hole (SMBH) masses, we performed a uniform decomposition of
the \civ\ 1549 broad-line profile. Based on the rest frame defined by
the \oiii 5007 narrow emission line, a medium-strong positive
correlation is found between the \civ\ blueshift and the luminosity at 5100\AA\
or the Eddington ratio \leddR. A medium-strong negative relationship is found
between the \civ\ blueshift and \civ\ equivalent width. These results support
the postulation where the radiation pressure may be the driver of \civ\
blueshift. There is a medium strong correlation between the mass ratio of
\civ-based to \hb-based \mbh and the \civ\ blueshift, which indicates that
the bias for \civ-based \mbh is affected by the \civ\ profile.Comment: 18 pages, 8 figures, Accepted for publication in A
- …