51 research outputs found
Dynanics of a vehicle-track coupling system at a rail joint
The dynamic behaviour at a rail joint is examined using a two-dimensional vehicleâtrack coupling model. The track system is described as a finite-length beam resting on a double-layer discrete viscous-elastic foundation. The vehicle is represented by a half car body and a single bogie. The influence of the number of layers considered, the number of elements between two sleepers, and the beam model is investigated. Parametric studies, both of the coupling model and the analytic formulae, are carried out in order to understand the influence of the main track and vehicle parameters on the P1 and P2 peak forces. Finally, the results in terms of P2 force from the proposed model are compared, not only with measured values but also with other simulated and analytical solutions. An excellent agreement between these values is foun
Multibody simulation benchmark for dynamic vehicle-track interaction in switches and crossings: results and method statements
A Benchmark of railway multibody dynamics software application to switches and crossings (S&C) is presented, comparing all major commercially available software and a few independent codes. Two different representative S&C have been implemented, using the Manchester Benchmark passenger vehicle. The final results show that all software offer a reliable and efficient way to understand the kinematic and dynamics forces between the wheels and the track elements. The highest challenges are found when modelling a combination of multiple rails in simultaneous contact with a wheel (check-stock or switch-stock), large longitudinal variations in rail shape (crossings) and high lateral steering forces (diverging cases in tight radius). In those cases, the codes able to account for the exact relative motion of each wheels with respect to each rails independently are the most apt. The most significant variations between software are found in the contact prediction with an influence on the detailed contact tangential and normal forces. The user variability is found to be very small, with the most time-consuming and error prone being the task of handling the input data for the variable rails definition. All software could benefit from improvements to assist the user and ensure higher reliability and efficiency generally
Repoint track switch wheel-rail mechanical interface analysis
Repoint is a new concept for track switching developed at Loughborough University. Through a novel locking arrangement it allows parallel, multi-channel actuation and pas-sive locking functions, providing a high degree of fault tolerance. The concept, based around a stub switch, offers several features that current designs are unable to achieve. The aim of the work presented in this paper is to evaluate the dynamic interaction forces due to the passage of rolling stock over the switch and, particularly, the area of the stub rail ends, in comparison to a conventional switch. Specific behaviour and load transfer conditions from one rail to the other at the joint are analysed, as well as long term wear conditions of the rails. These evaluations are undertaken by means of dynamic simulations, leading to design refinement of the stub rail ends
Effects of Redispersible Polymer Powder on Mechanical and Durability Properties of Preplaced Aggregate Concrete with Recycled Railway Ballast
The rapid-hardening method employing the injection of calcium sulfoaluminate (CSA) cement mortar into voids between preplaced ballast aggregates has recently emerged as a promising approach for the renovation of existing ballasted railway tracks to concrete tracks. This method typically involves the use of a redispersible polymer powder to enhance the durability of the resulting recycled aggregate concrete. However, the effects of the amount of polymer on the mechanical and durability properties of recycled ballast aggregate concrete were not clearly understood. In addition, the effects of the cleanness condition of ballast aggregates were never examined. This study aimed at investigating these two aspects through compression and flexure tests, shrinkage tests, freezing-thawing resistance tests, and optical microscopy. The results revealed that an increase in the amount of polymer generally decreased the compressive strength at the curing age of 28 days. However, the use of a higher polymer ratio enhanced the modulus of rupture, freezing-thawing resistance, and shrinkage resistance, likely because it improved the microstructure of the interfacial transition zones between recycled ballast aggregates and injected mortar. In addition, a higher cleanness level of ballast aggregates generally improved the mechanical and durability qualities of concrete
Dysregulation of Ribosome Biogenesis and Translational Capacity Is Associated with Tumor Progression of Human Breast Cancer Cells
Protein synthesis is a fundamental cell process and ribosomes - particularly through the ribosomal RNA that display ribozyme activity - are the main effectors of this process. Ribosome biogenesis is a very complex process involving transcriptional a
Vehicle â Track interaction: MB simulation for track loading limits and damage identification
- âŠ