Tuning the magnetic coupling of a molecular spin interface via electron doping

Mastering the magnetic response of molecular spin interfaces by tuning the occupancy of the molecular orbitals, which carry the spin magnetic moment, can be accomplished by electron doping. We propose a viable route to control the magnetization direction and magnitude of a molecular spin network, in a graphene-mediated architecture, achieved via alkali doping of manganese phthalocyanine (MnPc) molecules assembled on cobalt intercalated under a graphene membrane. The antiparallel magnetic alignment of the MnPc molecules with the underlying Co layer can be switched to a ferromagnetic state by electron doping. Multiplet calculations unveil an enhanced magnetic state of the Mn centers with a 3/2 to 5/2 spin transition induced by alkali doping, as confirmed by the steepening of the hysteresis loops, with higher saturation magnetization values. This new molecular spin configuration can be aligned by an external field, almost independently from the hard-magnet substrate effectively behaving as a free magnetic layer

Room-temperature synthesis of 2D-Ti3C2Tx nano-sheets by organic base treatment

The growing demand for improved electrochemical performance in energy storage systems has stimulated research into advanced two-dimensional (2D) materials for electrodes. In this work, we obtain a layered MXene compound by exfoliating a titanium aluminum carbide precursor using tetramethylammonium hydroxide (TMAOH) ions in a full room temperature process followed by manual shaking. The hexagonal crystal structure and composition of the layered materials are characterized using different techniques. X-Ray diffraction shows the formation of 2D nano-sheets before and after the TMAOH treatment via its characteristic (002) diffraction peak, bringing to light an increase in the interlayer spacing after treatment. Scanning electron microscopy images confirm the layered morphology, whose composition is determined by energy dispersive x-ray analysis for the bulk material and by x-ray photoelectron spectroscopy for the surface of the obtained compounds. This study demonstrates a promising route to enhance delamination of this MXene 2D material in a low-cost room-temperature approach

Metal-phthalocyanine ordered layers on Au(110): Metal-dependent adsorption energy

Iron-phthalocyanine and cobalt-phthalocyanine chains, assembled along the Au(110)-(1×2) reconstructed channels, present a strong interaction with the Au metallic states, via the central metal ion. X-ray photoemission spectroscopy from the metal-2p core-levels and valence band high-resolution ultraviolet photoelectron spectroscopy bring to light signatures of the interaction of the metalphthalocyanine single-layer with gold. The charge transfer from Au to the molecule causes the emerging of a metal-2p core level component at lower binding energy with respect to that measured in the molecular thin films, while the core-levels associated to the organic macrocycle (C and N 1s) are less influenced by the adsorption, and the macrocycles stabilize the interaction, inducing a strong interface dipole. Temperature Programmed Desorption experiments and photoemission as a function of temperature allow to estimate the adsorption energy for the thin-films, mainly due to the moleculemolecule van der Waals interaction, while the FePc and CoPc single-layers remain adsorbed on the Au surface up to at least 820 K. © 2014 AIP Publishing LLC.Fil: Massimi, Lorenzo. Universita Di Roma. Departamento de Fisica; ItaliaFil: Angelucci, Marco. Universita Di Roma. Departamento de Fisica; ItaliaFil: Gargiani, Perluigi. Universita Di Roma. Departamento de Fisica; ItaliaFil: Betti, Maria Grazia. Universita Di Roma. Departamento de Fisica; ItaliaFil: Montoro, Silvia Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Santa Fe. Instituto de Física del Litoral; ArgentinaFil: Mariani, Carlo. Universita Di Roma. Departamento de Fisica; Itali

A lithium-ion battery based on a graphene nanoflakes ink anode and a lithium iron phosphate cathode

Li-ion rechargeable batteries have enabled the wireless revolution transforming global communication. Future challenges, however, demands distributed energy supply at a level that is not feasible with the current energy-storage technology. New materials, capable of providing higher energy density are needed. Here we report a new class of lithium-ion batteries based on a graphene ink anode and a lithium iron phosphate cathode. By carefully balancing the cell composition and suppressing the initial irreversible capacity of the anode, we demonstrate an optimal battery performance in terms of specific capacity, i.e. 165 mAhg-1, estimated energy density of about 190 Whkg-1 and life, with a stable operation for over 80 charge-discharge cycles. We link these unique properties to the graphene nanoflake anode displaying crystalline order and high uptake of lithium at the edges, as well as to its structural and morphological optimization in relation to the overall battery composition. Our approach, compatible with any printing technologies, is cheap and scalable and opens up new opportunities for the development of high-capacity Li-ion batteries.Comment: 17 pages, 10 figure

Ultrathin Transparent B-C-N Layers Grown on Titanium Substrates with Excellent Electrocatalytic Activity for the Oxygen Evolution Reaction

This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Energy Materials, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/abs/10.1021/acsaem.9b02339Ultrathin B-C-N layers grown on Ti substrates are investigated as efficient anodes for electrochemical water splitting. A fast and direct synthetic route has been used based on plasma-enhanced chemical vapor deposition with methylamine borane as a single-source molecular precursor. The effect of growth time on the morphological and structural properties and on the chemical composition of the layers has been investigated by scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy coupled with electron energy loss spectroscopy. Flat B-C-N layers on top of an amorphous titanium oxide layer present at the Ti surface have been obtained by using short growth times, while longer growth times give rise to core/shell structures formed by vertical wall B-C-N layers and titanium carbonitride phases. The obtained layers present enhanced electrocatalytic activity for the oxygen evolution reaction in alkaline aqueous solutions. Moreover, because of their ultrathin nature, the B-C-N layers preserve the photocurrents of the underlying titanium oxide layer, acting as transparent electrodes with high conductivity for the photogenerated charge carriers and improved electrocatalytic activity for the oxidation of water to oxygen gasThis work has been funded under RTI2018-099794-B-I00 grant of Spanish MICINN and by PRIN Grant FERMAT (2017KFY7XF) of Italian MIU

Narrowing of d bands of FeCo layers intercalated under graphene

We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing density functional theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphene film. At the same time, the FeCo intercalated layers induce a clear transition from a nearly undisturbed to a strongly hybridized graphene π-band, as measured by angle-resolved photoemission spectroscopy. A comparison of experimental results with the computed band structure and the projected density of states unveils a spin-selective hybridization between the π band of graphene and FeCo-3d states. Our results demonstrate that the reduced dimensionality, as well as the hybridization within the FeCo layers, induces a narrowing and a clear splitting of Fe 3d-up and Fe 3d-down-spin bands of the confined FeCo layers with respect to bulk Fe and Co

Magnetic response and electronic states of well defined Graphene/Fe/Ir(111) heterostructure

We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr bands and Fe d states breaks the symmetry of the Dirac cone, with a downshift in energy of the apex by about 3 eV, and well-localized Fe intermixed states induced in the energy region just below the Fermi level. First principles electronic structure calculations show a large spin splitting of the Fe states, resulting in a majority spin channel almost fully occupied and strongly hybridized with Gr π states. X-ray magnetic circular dichroism on the Gr/Fe/Ir heterostructure reveals an ordered spin configuration with a ferromagnetic response of Fe layer(s), with enhanced spin and orbital configurations with respect to the bcc-Fe bulk values. The magnetization switches from a perpendicular easy magnetization axis when the Fe single layer is lattice matched with the Ir(111) surface to a parallel one when the Fe thin film is almost commensurate with graphene

Empty electron states in cobalt-intercalated graphene

The dispersion of the electronic states of epitaxial graphene (Gr) depends significantly on the strength of the bonding with the underlying substrate. We report on empty electron states in cobalt-intercalated Gr grown on Ir(111), studied by angle-resolved inverse photoemission spectroscopy and x-ray absorption spectroscopy, complemented with density functional theory calculations. The weakly bonded Gr on Ir preserves the peculiar spectroscopic features of the Gr band structure, and the empty spectral densities are almost unperturbed. Upon intercalation of a Co layer, the electronic response of the interface changes, with an intermixing of the Gr π* bands and Co d states, which breaks the symmetry of π/σ states, and a downshift of the upper part of the Gr Dirac cone. Similarly, the image potential of Ir(111) is unaltered by the Gr layer, while a downward shift is induced upon Co intercalation, as unveiled by the image state energy dispersion mapped in a large region of the surface Brillouin zone

FePc Adsorption on the Moir\'e Superstructure of Graphene Intercalated with a Co Layer

The moir\'e superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moir\'e pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moir\'e superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface.Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in J. Phys. Chem. C , copyright \c{opyright} American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.jpcc.6b0987