Ultrasound to Enhance a Liquid–Liquid Reaction

Liquid–liquid mass transfer with ultrasound was investigated experimentally during the hydrolysis of n-amyl acetate. Power ultrasound is supposed to improve the yield and kinetics of such multiphase chemical reactions thanks to the mechanical effects of cavitation. Indeed, implosion of micro-bubbles at the vicinity of the liquid– liquid interface generates disruption of this surface, and enhances mixing in the liquid around the inclusion, thus improving mass transfer between the two phases. This effect has been demonstrated here on the hydrolysis of n-amyl acetate by sodium hydroxide, a rather slow reaction but influenced by mass transfer; the reaction is carried out in a glass jacketed reactor, 500 mL of volume, equipped with a Rushton turbine and a 20 kHz sonotrode dipping in the solution. The ester is initially pure in the organic dispersed phase, and sodium hydroxide has an initial concentration of 300 mol/m3; one of the products, pentanol partitions between the two phases and the sodium salt stays in the aqueous phase. The initial apparent reaction rate is measured from the record of the conductivity giving the concentration of alkali versus time. The reaction rate was always found to increase when ultrasound is superimposed to mechanical stirring (at 600 rpm), with a positive influence of input power (20 and 50 W). When varying initial concentration (300 and 600 mol/m3), temperature (36 and 45°C) and ultrasound emitter (sonotrode or cuphorn), the benefit of ultrasound over mechanical agitation was systematic. The only case of a weak influence of ultrasound was the sonication of a dense medium, containing 23% of organic phase and impeding the propagation of ultrasound

Women's view on sexual intercourse and physical abuse : results from a cross-sectional survey in villages surrounding Bobo-Dioulasso, Burkina Faso

Our objective is to understand what do verbal and physical interactions within the couple as declared by women tell us about their related autonomy regarding sexual intercourse with their regular partner. Data were gathered thanks to a baseline KABP survey in 8 villages in Burkina Faso. Overall, 591 women aged 15 to 49 living in a stable union constitute our analysis sample. A low percentage (18.2%) of respondents declares that a woman can refuse to have sex with her partner. However, a large part (77.3%) considers this refusal as an unacceptable reason for wife beating. Multivariate logistic regression shows that the belief in a possibility to refuse sex is higher among women in polygamous union and among those who have their own resources. In contrast, disapproval of wife beating as a reaction to this refusal increases with age. It is also higher among women not denying that their partner has multiple sexual partners. Surprisingly, it is lower among women who have their own economic resources. These findings suggest that programs should work on strong beliefs, which are the result of internalization of gender roles as they may, in patriarchal societies such as Burkina Faso, facilitate acceptance of domestic violence

Access to health care for people with disabilities in rural Malawi: what are the barriers?

Background People with disabilities experience significant health inequalities. In Malawi, where most individuals live in low-income rural settings, many of these inequalities are exacerbated by restricted access to health care services. This qualitative study explores the barriers to health care access experienced by individuals with a mobility or sensory impairment, or both, living in rural villages in Dowa district, central Malawi. In addition, the impact of a chronic lung condition, alongside a mobility or sensory impairment, on health care accessibility is explored. Methods Using data from survey responses obtained through the Research for Equity And Community Health (REACH) Trust’s randomised control trial in Malawi, 12 adult participants, with scores of either 3 or 4 in the Washington Group Short Set (WGSS) questions, were recruited. The WGSS questions concern a person’s ability in core functional domains (including seeing, hearing and moving), and a score of 3 indicates ‘a lot of difficulty’ whilst 4 means ‘cannot do at all’. People with cognitive impairments were not included in this study. All who were selected for the study participated in an individual in-depth interview and full recordings of these were then transcribed and translated. Results Through thematic analysis of the transcripts, three main barriers to timely and adequate health care were identified: 1) Cost of transport, drugs and services, 2) Insufficient health care resources, and 3) Dependence on others. Attitudinal factors were explored and, whilst unfavourable health seeking behaviour was found to act as an access barrier for some participants, community and health care workers’ attitudes towards disability were not reported to influence health care accessibility in this study. Conclusions This study finds that health care access for people with disabilities in rural Malawi is hindered by closely interconnected financial, practical and social barriers. There is a clear requirement for policy makers to consider the challenges identified here, and in similar studies, and to address them through improved social security systems and health system infrastructure, including outreach services, in a drive for equitable health care access and provision

Etude par choc laser de l'adhérence de barrières thermiques aéronautiques

National audienceL'estimation de la durée de vie des barrières thermiques aéronautiques (BT) déposées sur les aubes de turbines haute pression nécessite de comprendre les mécanismes induisant l'endommagement entre la sous-couche et la zircone. Le LASAT, LAser Shock Adhesion Test ou essai d'adhérence par choc laser, est une technique exploitant tout son potentiel dans le cas des BTs, en particulier par sa rapidité, simplicité et au comportement optique de la couche de zircone. Ce dernier avantage permet de dimensionner l'endommagement généré sans réaliser de coupes métallographiques. Un nouveau protocole de l'essai LASAT a été mis en place utilisant les ondes de choc bidimensionnelles et exploitant la dépendance entre l'intensité du choc appliqué, le niveau d'adhérence du dépôt, et la dimension de la fissure générée

Laser Shock Adhesion Test (LASAT) of electron beam physical vapor deposited thermal barrier coatings (EB-PVD TBCs)

International audienceDamage prediction, adhesion strength and remaining lifetime of TBC are highly important data for understanding and preventing TBC spallation on blades. LAser Shock Adhesion Test (LASAT) is a powerful method to measure adhesion of coating due to its rapidity, simplicity and capabilities to distinguish different strength levels and the easy damage observation in case of TBCs. A new protocol of LASAT has been introduced in order to measure the adhesion level of the ceramic coating from the exploitation of the two-dimensional effects that promotes a shock wave pressure-dependent size of the damage. Finite element modeling, taking into account the TBCs dimensions, showed the edges effect on interfacial stress applied by laser shock

Status report on GANIL-SPIRAL1

International audienceThe GANIL facility (Caen, France) (Figure 1) is dedicated to the acceleration of heavy ion beams for nuclear physics, atomic physics, radiobiology and material irradiation. The production of radioactive ion beams for nuclear physics studies represents the main part of the activity. Two complementary methods are used: the Isotope Separation On-Line (ISOL, the SPIRAL1 facility) and the In-Flight Separation techniques (IFS). SPIRAL1, the ISOL facilty, is running since 2001, producing and post-accelerating radioactive ion beams. The energy range available goes from 1.2 MeV/A to 25 MeV/A with a compact cyclotron (CIME, K=265). The running mode of this machine will be recalled as well as a review of the operation from 2001 to 2006. A point will be done on the past, present and future projects which allow to continue to develop the capacities of this equipment and to answer the new demands from the physicists, such as new beamlines for low or high energy experiments, new diagnotics of control or the adaptation of an identification system using Silicon, Germanium or plastic detectors in the requirements of the operation evironnement