33 research outputs found
Measuring Beta-Functions with K-Modulation
The precise measurement of the local value of the beta-function at the place of a beam size monitor is necessary for the precise determination of the beam emittance. We developed a new method for the measurement of the beta-function by using of continuous square-wave modulation of the force of the quadrupole and by continuous tune tracking. Measurements were performed at LEP in order to evaluate the precision that can be achieved with this method in the LHC. The paper describes the method and discusses in details the results obtained at LEP for colliding and non-colliding beams
Functionality of the LEP tune meters with 3rd generation DSPs
The LEP tune meters have been upgraded by replacing the original Motorola 68020 processor cards by Texas Instruments TSM320C30 Digital Signal Processor cards with floating point arithmetic and by creating an optional connection to a more sensitive beam position monitor. This upgrade has lead to a considerable increase in speed and accuracy. The new instrument can generate a continuous real time display of the beam motion in the frequency domain which is well suited to monitor dynamic phenomena occurring during injection and acceleration of the LEP collider. The dynamic phenomena can also be stored for off line analysis. The paper describes the functionality of the instrument in terms of user interface and covers some aspects of code debugging and process synchronization for DSP's connected to the standard control system of an accelerator
The Q-Loop: a Function Driven Feedback System for the Betatron Tunes During the LEP Energy Ramp
In normal operation LEP is ramped from injection energy, typically 22 GeV, to energies of over 90 GeV where physics taking takes place. Effective control of the betatron during the ramp is essential t o ensure good transmission of stored current. The LEP Q-loop is a feedback system used to control the tunes during the energy ramp. By following a pre-programmed tune function it provides a means of avoiding dangerous resonances and thus beam loss. The basic components the Q-loop will be described, and operational results presented. Emphasis will be given to the problems encountered and the solut ions found
Real-Time Monitoring of Beam-Beam Modes at LEP
By slightly exciting one of two colliding bunches in LEP, it is possible to enhance the eigenfrequencies of the resonant system of the two bunches coupled by the space charge force. The LEP Qmeter has been adapted to detect, among these excited frequencies, the so called s- and p- modes, whose distance is proportional to the luminosity. A real time display of these quantities provides the Operators with an effective way of finely optimizing the luminosity
Excitation of Large Transverse Beam Oscillations without Emittance Blow-up using the AC-Dipole Principle
The so-called "AC-Dipole" principle allows the excitation of transverse oscillations to large (several sigma) excursions without emittance blow-up. The idea was originally proposed and tested at BNL for resonance crossing with polarized beams, using an orbit corrector dipole with an excitation frequency close to the betatron tune, hence "AC-Dipole". This method of beam excitation has several potential applications in teh LHC, such as phase advance and beta-measurements, dynamic aperture studies and the investigation of resonance strengths. The technique was recently tested in the CERN SPS using the transverse damper as an "AC-Dipole" providing the fixed frequency excitation. Results from this experiment are presented, along with an explanation of the underlying principle
Parametrization of the Driven Betatron Oscillation
An AC dipole is a magnet which produces a sinusoidally oscillating dipole
field and excites coherent transverse beam motion in a synchrotron. By
observing this coherent motion, the optical parameters can be directly measured
at the beam position monitor locations. The driven oscillation induced by an AC
dipole will generate a phase space ellipse which differs from that of the free
oscillation. If not properly accounted for, this difference can lead to a
misinterpretation of the actual optical parameters, for instance, of 6% or more
in the cases of the Tevatron, RHIC, or LHC. The effect of an AC dipole on the
linear optics parameters is identical to that of a thin lens quadrupole. By
introducing a new amplitude function to describe this new phase space ellipse,
the motion produced by an AC dipole becomes easier to interpret. Beam position
data taken under the influence of an AC dipole, with this new interpretation in
mind, can lead to more precise measurements of the normal Courant-Snyder
parameters. This new parameterization of the driven motion is presented and is
used to interpret data taken in the FNAL Tevatron using an AC dipole.Comment: 8 pages, 8 figures, and 1 tabl
Luminosity and Beam Measurements used for Performance Optimisation in the LEP Collider
The vertical beam-beam parameter in LEP reached 0.083 in 1999. In order to achieve and maintain this high performance a number of different observables are continuously monitored and optimised. The beam sizes are measured using X-ray detectors and UV telescopes. The luminosity is determined directly with tungsten-silicon calorimeters and indirectly through an accurate measurement of the beam lifetime. The tune shift is measured from the tune spectrum in collision. Beam-beam deflection scans provide information about the beam sizes and separation at the interaction points. The different measurements are shortly reviewed and their resolution and time response is analysed. Their use for the optimisation of LEP is described
The CERN PS multi-turn extraction based on beam splittting in stable islands of transverse phase space: Design Report
Since 2001 considerable effort has been devoted to the study of a possible replacement of the continuous-transfer extraction mode from the PS to the SPS. Such an approach, called Multi-Turn Extraction (MTE), is based on capture of the beam inside stable islands of transverse phase space, generated by sextupoles and octupoles, thanks to a properly chosen tune variation. Both numerical simulations and measurements with beam were performed to understand the properties of this new extraction mode. The experimental study was completed at the end of 2004 and by the end of 2005 a scheme to implement this novel approach in the PS machine was defined and its performance assessed. This design report presents the outcome of the studies undertaken both in terms of technical issues as well as of resources necessary to implement the proposed scheme
Installation and Hardware commissioning of the Multi-Turn extraction at the CERN proton synchrotron
The implementation of the new Multi-Turn Extraction (MTE) at the CERN Proton Synchrotron required major hardware changes for the nearly 50-year old accelerator. The installation of new Pulse Forming Networks (PFN) and refurbished kicker magnets for the extraction, new sextupole and octupole magnets, new power converters, together with an in-depth review of the machine aperture leading to the design of new vacuum chambers was required. As a result, a heavy programme of interventions had to be scheduled during the winter shut-down 2007-8. The newly installed hardware and its commissioning is presented and discussed in details
Update on Beam Induced RF Heating in the LHC
Since June 2011 the rapid increase of the luminosity performance of the LHC has come at the expense of both increased temperature and pressure of specific, near-beam, LHC equipment. In some cases, this beam induced heating has caused delays while equipment cool-down, beam dumps and even degradation of some devices. This contribution gathers the observations of beam induced heating, attributed to longitudinal beam coupling impedance, their current level of understanding and possible actions planned to be implemented during the 1st LHC Long Shutdown (LS1) in 2013-2014