Chemical changes in the adductor muscle of the cheliped of the crayfish in relation to the double motor innervation

Work from this laboratory has shown that a number of the striated muscles of the legs of the crayfish show a typical motor innervation (1). Such muscles are innervated by two motor fibers only, each causing a different type of contraction. One of these, resulting from stimulation of the thicker fiber, is termed the "fast" contraction, while the other is called the "slow." Both anatomical evidence and physiological experiments indicate that each muscle fiber is innervated by these two axons and that both contractions occur in the same muscle fibers (2, 3). The most striking difference between the two contractions is found in the adductor muscle of the cheliped of the crayfish. In this case, a single impulse in the thicker motor fiber causes a twitch-like contraction, and the system behaves in almost all respects as does a single motor unit of a vertebrate muscle: single shocks of different strengths give twitches of a considerable strength and a constant height, and during tetanic contraction the action currents are all of the same magnitude. In contrast to this, single shocks given to the thinner fiber produce no visible response in the muscle, but faradic stimulation causes action currents which grow in height and a contraction with a long latent period. The action currents in this case are always much smaller than those of the fast contraction. The chemical changes occurring in the adductor muscle of the cheliped of the crayfish Cambarus clarkii during these two types of contraction were investigated in order to obtain evidence on two possible mechanisms by which the two contractions might occur in the same muscle fiber. In the first place, two contractile substances might be present, a "phasic" and a "tonic" one, analogous to those supposed by Botazzi (4) in the vertebrate striated muscle, or the same substance might contract in both cases, the difference between the contractions being due solely to differences in the transmission mechanism between the nerve impulse and the contractile substance. Methods were devised for the rapid removal of the stimulated cheliped to liquid air and for the analysis of the frozen muscle tissue. The changes in phosphate and in lactic acid content were used as indices of the chemical changes occurring

Nondestructive Subsurface Imaging with the Reflection Acoustic Microscope

The Reflection Acoustic Microscope, operating at a microwave frequency near 400 MHz, has been used to image and examine subsurface detail in a multilayer ceramic chip capacitor (MCCC). Bulk examination of the 0.9 mm thick MCCC is at present not possible with this high resolution acoustic microscope because of the short depth of focus of the particular lens designed for the system and because of the short wavelength ( w 4 m)

Electronic Characteristics and Charge Transport Mechanisms for Large Area Aromatic Molecular Junctions

This paper reports the electron transport characteristics of carbon/molecule/Cu molecular junctions, where aromatic molecules (azobenzene or AB and nitroazobenzene or NAB) are employed as the molecular component. It is shown that these devices can be made with high yield (>90%), display excellent reproducibility, and can withstand at least 1.5 × 10 9 potential cycles and temperatures of at least 180°C. Transport mechanisms are investigated by analysis of current density/voltage (J-V) curves as a function of the molecular layer thickness and temperature. Results show that J decreases exponentially with thickness, giving a measured value for the low-bias attenuation factor ( ) of 2.5 ( 0.1 nm -1 for AB and NAB. In addition, it is shown that transport is not thermally activated over a wide range of temperatures (5-450 K) and that the appearance of a thermally "activated" region at higher temperatures can be accounted for by the effect of temperature on the distribution of electrons around the Fermi level of the contact(s). These results indicate that quantum mechanical tunneling is likely the mechanism for charge transport in these junctions. Although application of the Simmons tunneling model leads to transport parameters consistent with nonresonant tunneling, the parameters obtained from fitting experimental data indicate that the barrier height and/or shape, effective mass, and dielectric constant (ε) can all change with thickness. Experimental measurements of ε and density functional theory (DFT) calculations of molecular energy levels and polarizability support these conclusions. Finally, the implications of the transport mechanisms are discussed from the viewpoint of designing functional molecular electronic devices

Cell Rep

The identification of cell types of origin for cancer has important implications for tumor stratification and personalized treatment. For prostate cancer, the cell of origin has been intensively studied, but it has remained unclear whether basal or luminal epithelial cells, or both, represent cells of origin under physiological conditions in vivo. Here, we use a novel lineage-tracing strategy to assess the cell of origin in a diverse range of mouse models, including Nkx3.1(+/-); Pten(+/-), Pten(+/-), Hi-Myc, and TRAMP mice, as well as a hormonal carcinogenesis model. Our results show that luminal cells are consistently the observed cell of origin for each model in situ; however, explanted basal cells from these mice can generate tumors in grafts. Consequently, we propose that luminal cells are favored as cells of origin in many contexts, whereas basal cells only give rise to tumors after differentiation into luminal cells

Discovery and Characterization of Bukakata orbivirus (\u3ci\u3eReoviridae:Orbivirus\u3c/i\u3e), a Novel Virus from a Ugandan Bat

While serological and virological evidence documents the exposure of bats to medically important arboviruses, their role as reservoirs or amplifying hosts is less well-characterized. We describe a novel orbivirus (Reoviridae:Orbivirus) isolated from an Egyptian fruit bat (Rousettus aegyptiacus leachii) trapped in 2013 in Uganda and named Bukakata orbivirus. This is the fifth orbivirus isolated from a bat, however genetic information had previously only been available for one bat-associated orbivirus. We performed whole-genome sequencing on Bukakata orbivirus and three other bat-associated orbiviruses (Fomede, Ife, and Japanaut) to assess their phylogenetic relationship within the genus Orbivirus and develop hypotheses regarding potential arthropod vectors. Replication kinetics were assessed for Bukakata orbivirus in three different vertebrate cell lines. Lastly, qRT-PCR and nested PCR were used to determine the prevalence of Bukakata orbivirus RNA in archived samples from three populations of Egyptian fruit bats and one population of cave-associated soft ticks in Uganda. Complete coding sequences were obtained for all ten segments of Fomede, Ife, and Japanaut orbiviruses and for nine of the ten segments for Bukakata orbivirus. Phylogenetic analysis placed Bukakata and Fomede in the tick-borne orbivirus clade and Ife and Japanaut within the Culicoides/phlebotomine sandfly orbivirus clade. Further, Bukakata and Fomede appear to be serotypes of the Chobar Gorge virus species. Bukakata orbivirus replicated to high titers (106–107 PFU/mL) in Vero, BHK-21 [C-13], and R06E (Egyptian fruit bat) cells. Preliminary screening of archived bat and tick samples do not support Bukakata orbivirus presence in these collections, however additional testing is warranted given the phylogenetic associations observed. This study provided complete coding sequence for several bat-associated orbiviruses and in vitro characterization of a bat-associated orbivirus. Our results indicate that bats may play an important role in the epidemiology of viruses in the genus Orbivirus and further investigation is warranted into vector-host associations and ongoing surveillance efforts

Discovery and Characterization of Bukakata orbivirus (\u3ci\u3eReoviridae:Orbivirus\u3c/i\u3e), a Novel Virus from a Ugandan Bat

While serological and virological evidence documents the exposure of bats to medically important arboviruses, their role as reservoirs or amplifying hosts is less well-characterized. We describe a novel orbivirus (Reoviridae:Orbivirus) isolated from an Egyptian fruit bat (Rousettus aegyptiacus leachii) trapped in 2013 in Uganda and named Bukakata orbivirus. This is the fifth orbivirus isolated from a bat, however genetic information had previously only been available for one bat-associated orbivirus. We performed whole-genome sequencing on Bukakata orbivirus and three other bat-associated orbiviruses (Fomede, Ife, and Japanaut) to assess their phylogenetic relationship within the genus Orbivirus and develop hypotheses regarding potential arthropod vectors. Replication kinetics were assessed for Bukakata orbivirus in three different vertebrate cell lines. Lastly, qRT-PCR and nested PCR were used to determine the prevalence of Bukakata orbivirus RNA in archived samples from three populations of Egyptian fruit bats and one population of cave-associated soft ticks in Uganda. Complete coding sequences were obtained for all ten segments of Fomede, Ife, and Japanaut orbiviruses and for nine of the ten segments for Bukakata orbivirus. Phylogenetic analysis placed Bukakata and Fomede in the tick-borne orbivirus clade and Ife and Japanaut within the Culicoides/phlebotomine sandfly orbivirus clade. Further, Bukakata and Fomede appear to be serotypes of the Chobar Gorge virus species. Bukakata orbivirus replicated to high titers (106–107 PFU/mL) in Vero, BHK-21 [C-13], and R06E (Egyptian fruit bat) cells. Preliminary screening of archived bat and tick samples do not support Bukakata orbivirus presence in these collections, however additional testing is warranted given the phylogenetic associations observed. This study provided complete coding sequence for several bat-associated orbiviruses and in vitro characterization of a bat-associated orbivirus. Our results indicate that bats may play an important role in the epidemiology of viruses in the genus Orbivirus and further investigation is warranted into vector-host associations and ongoing surveillance efforts

What, how and who: Cost-effectiveness analyses of COVID-19 vaccination to inform key policies in Nigeria.

While safe and efficacious COVID-19 vaccines have achieved high coverage in high-income settings, roll-out remains slow in sub-Saharan Africa. By April 2022, Nigeria, a country of over 200 million people, had only distributed 34 million doses. To ensure the optimal use of health resources, cost-effectiveness analyses can inform key policy questions in the health technology assessment process. We carried out several cost-effectiveness analyses exploring different COVID-19 vaccination scenarios in Nigeria. In consultation with Nigerian stakeholders, we addressed three key questions: what vaccines to buy, how to deliver them and what age groups to target. We combined an epidemiological model of virus transmission parameterised with Nigeria specific data with a costing model that incorporated local resource use assumptions and prices, both for vaccine delivery as well as costs associated with care and treatment of COVID-19. Scenarios of vaccination were compared with no vaccination. Incremental cost-effectiveness ratios were estimated in terms of costs per disability-adjusted life years averted and compared to commonly used cost-effectiveness ratios. Viral vector vaccines are cost-effective (or cost saving), particularly when targeting older adults. Despite higher efficacy, vaccines employing mRNA technologies are less cost-effective due to high current dose prices. The method of delivery of vaccines makes little difference to the cost-effectiveness of the vaccine. COVID-19 vaccines can be highly effective and cost-effective (as well as cost-saving), although an important determinant of the latter is the price per dose and the age groups prioritised for vaccination. From a health system perspective, viral vector vaccines may represent most cost-effective choices for Nigeria, although this may change with price negotiation

Carrier multiplication in van der Waals layered transition metal dichalcogenides

© 2019, The Author(s).Carrier multiplication (CM) is a process in which high-energy free carriers relax by generation of additional electron-hole pairs rather than by heat dissipation. CM is promising disruptive improvements in photovoltaic energy conversion and light detection technologies. Current state-of-the-art nanomaterials including quantum dots and carbon nanotubes have demonstrated CM, but are not satisfactory owing to high-energy-loss and inherent difficulties with carrier extraction. Here, we report CM in van der Waals (vdW) MoTe2 and WSe2 films, and find characteristics, commencing close to the energy conservation limit and reaching up to 99% CM conversion efficiency with the standard model. This is demonstrated by ultrafast optical spectroscopy with independent approaches, photo-induced absorption, photo-induced bleach, and carrier population dynamics. Combined with a high lateral conductivity and an optimal bandgap below 1 eV, these superior CM characteristics identify vdW materials as an attractive candidate material for highly efficient and mechanically flexible solar cells in the future11sciescopu