Molar band re-use and decontamination: a survey of specialists

Objective: To determine the pattern of use and re-use of orthodontic molar bands, and examine infection control measures in a sample of UK orthodontists. Design: Questionnaire survey. Subjects and methods: Questionnaires were sent to 204 individuals selected at random from the UK Specialist Orthodontist list. Follow-up questionnaires were sent to those that had not replied within 8 weeks. An overall response rate of 74.5% was achieved. Main outcome measures: Orthodontic band use and re-use and cross-infection control. Results: The reported rates of pre-sterilization cleaning and sterilization of orthodontic instruments were 92 and 100%, respectively. Of the respondents, 90% were using bands for molar teeth with the remainder routinely used bonded attachments. Most clinicians (95%) using bands routinely re-used them after being tried-in with 5% discarding them. Pre-sterilization cleaning of re-used molar bands was carried out by 92% of respondents who reclaimed bands. Sterilization of these bands was then carried out by most specialists apart from 2. Conclusions: The majority of UK specialist orthodontists who responded to the questionnaire are adhering to universal precautions for cross-infection control and are carrying out approved decontamination procedures. The majority are also reusing orthodontic bands that have been tried in the mouth, but found to be the wrong size. The great diversity of reported procedures for decontamination of instruments and bands suggest that more research is required to provide guidelines into the most effective method

Velocity field near the jet orifice of a round jet in a crossflow

Experimentally determined velocities at selected locations near the jet orifice are presented and analyzed for a round jet in crossflow. Jet-to-crossflow velocity ratios of four and eight were studied experimentally for a round subsonic jet of air exhausting perpendicularly through a flat plate into a subsonic crosswind of the same temperature. Velocity measurements were made in cross sections to the jet plume located from one to four jet diameters from the orifice. Jet centerline and vortex properties are presented and utilized to extend the results of a previous study into the region close to the jet orifice

Pattern formation in reaction diffusion models with spatially inhomogeneous diffusion coefficients

Reaction-diffusion models for biological pattern formation have been studied extensively in a variety of embryonic and ecological contexts. However, despite experimental evidence pointing to the existence of spatial inhomogeneities in various biological systems, most models have only been considered in a spatially homogeneous environment. The authors consider a two-chemical reaction-diffusion mechanism in one space dimension in which one of the diffusion coefficients depends explicitly on the spatial variable. The model is analysed in the case of a step function diffusion coefficient and the insight gained for this special case is used to discuss pattern generation for smoothly varying diffusion coefficients. The results show that spatial inhomogeneity may be an important biological pattern regulator, and possible applications of the model to chondrogenesis in the vertebrate limb are suggested

Unravelling the Turing bifurcation using spatially varying diffusion coefficients

The Turing bifurcation is the basic bifurcation generating spatial pattern, and lies at the heart of almost all mathematical models for patterning in biology and chemistry. In this paper the authors determine the structure of this bifurcation for two coupled reaction diffusion equations on a two-dimensional square spatial domain when the diffusion coefficients have a small explicit variation in space across the domain. In the case of homogeneous diffusivities, the Turing bifurcation is highly degenerate. Using a two variable perturbation method, the authors show that the small explicit spatial inhomogeneity splits the bifurcation into two separate primary and two separate secondary bifurcations, with all solution branches distinct. This splitting of the bifurcation is more effective than that given by making the domain slightly rectangular, and shows clearly the structure of the Turing bifurcation and the way in which the! var ious solution branches collapse together as the spatial variation is reduced. The authors determine the stability of the solution branches, which indicates that several new phenomena are introduced by the spatial variation, including stable subcritical striped patterns, and the possibility that stable stripes lose stability supercritically to give stable spotted patterns

Charge Violation and Alice Behavior in Global and Textured Strings

Spontaneous breaking of global symmetries can produce ``Alice'' strings: line defects which make unbroken symmetries multivalued, induce apparent charge violation via Aharonov-Bohm interactions, and form point defects when twisted into loops. We demonstrate this behavior for both divergent and textured global Alice strings. Both adiabatically scatter charged particles via effective Wilson lines. For textured Alice strings, such Wilson lines occur at all radii, and are multivalued only inside the string. This produces measurable effects, including path-dependent charge violation.Comment: 32 pages, 2 epsfigs, Revte

Does the bracket-ligature combination affect the amount of orthodontic space closure over three months? A randomized controlled trial

OBJECTIVE: To investigate the effect of bracket-ligature combination on the amount of orthodontic space closure over three months. DESIGN: Randomized clinical trial with three parallel groups. SETTING: A hospital orthodontic department (Chesterfield Royal Hospital, UK). PARTICIPANTS: Forty-five patients requiring upper first premolar extractions. METHODS: Informed consent was obtained and participants were randomly allocated into one of three groups: (1) conventional pre-adjusted edgewise brackets and elastomeric ligatures; (2) conventional pre-adjusted edgewise brackets and Super Slick((R)) low friction elastomeric ligatures; (3) Damon 3MX((R)) passive self-ligating brackets. Space closure was undertaken on 0.019x0.025-inch stainless steel archwires with nickel-titanium coil springs. Participants were recalled at four weekly intervals. Upper alginate impressions were taken at each visit (maximum three). The primary outcome measure was the mean amount of space closure in a 3-month period. RESULTS: A one-way ANOVA was undertaken [dependent variable: mean space closure (mm); independent variable: group allocation]. The amount of space closure was very similar between the three groups (1 mm per 28 days); however, there was a wide variation in the rate of space closure between individuals. The differences in the amount of space closure over three months between the three groups was very small and non-significant (P = 0.718). CONCLUSION: The hypothesis that reducing friction by modifying the bracket/ligature interface increases the rate of space closure was not supported. The major determinant of orthodontic tooth movement is probably the individual patient response

Thermal-Expansion and Fracture Toughness Properties ofParts made from Liquid Crystal Stereolithography Resins

Liquid crystal (LC) resins are a new kind ofstereolithography material that can produce parts with structured or ordered morphologies instead ofthe amorphous morphologies that result from standard resins. The LC molecules can be aligned before cure resulting in an anisotropic crosslinked network when the laser induced polymerization "locks-in" the alignment. Previous papers have explored liquid crystal orientation dynamics [1], the effects of orientation on viscoelastic and mechanical properties [2,3], and the processing ofLC resins by stereolithography [4]. This paper considers the effects ofmorphology on fracture toughness and thermal-expansion properties. Both toughness and thermal-stability continue to be important issues for stereolithography parts. The use ofLC resins may provide a way to significantly improve performance in both ofthese areas, and in addition result in parts with high upper use . temperatures.Mechanical Engineerin

New South Wales Vegetation classification and Assessment: Part 3, plant communities of the NSW Brigalow Belt South, Nandewar and west New England Bioregions and update of NSW Western Plains and South-western Slopes plant communities, Version 3 of the NSWVCA database

This fourth paper in the NSW Vegetation Classification and Assessment series covers the Brigalow Belt South-/1(BBS) and Nandewar (NAN) Bioregions and the western half of the New England Bioregion (NET), an area of 9.3 million hectares being 11.6% of NSW. It completes the NSWVCA coverage for the Border Rivers-Gwydir and Namoi CMA areas and records plant communities in the Central West and Hunter–Central Rivers CMA areas. In total, 585 plant communities are now classified in the NSWVCA covering 11.5 of the 18 Bioregions in NSW (78% of the State). Of these 226 communities are in the NSW Western Plains and 416 are in the NSW Western Slopes. 315 plant communities are classified in the BBS, NAN and west-NET Bioregions including 267 new descriptions since Version 2 was published in 2008. Descriptions of the 315 communities are provided in a 919 page report on the DVD accompanying this paper along with updated reports on other inland NSW bioregions and nine Catchment Management Authority areas fully or partly classified in the NSWVCA to date. A read-only version of Version 3 of the NSWVCA database is on the DVD for use on personal computers. A feature of the BBS and NAN Bioregions is the array of ironbark and bloodwood Eucalyptusdominated shrubby woodlands on sandstone and acid volcanic substrates extending from Dubbo to Queensland. This includes iconic natural areas such as Warrumbungle and Mount Kaputar National Parks and the 500,000 ha Pilliga Scrub forests. Large expanses of basalt-derived soils support grassy box woodland and native grasslands including those on the Liverpool Plains; near Moree; and around Inverell, most of which are cleared and threatened. Wetlands occur on sodic soils near Yetman and in large clay gilgais in the Pilliga region. Sedgelands are rare but occupy impeded creeks. Aeolian lunettes occur at Narran Lake and near Gilgandra. Areas of deep sand contain Allocasuarina, eucalypt mallee and Melaleuca uncinata heath. Tall grassy or ferny open forests occur on mountain ranges above 1000m elevation in the New England Bioregion and on the Liverpool Range while grassy box woodlands occupy lower elevations with lower rainfall and higher temperatures. The vegetation classification and assessment is based on over 100 published and unpublished vegetation surveys and map unit descriptions, expert advice, extra plot sampling and data analysis and over 25 000 km of road traverse with field checking at 805 sites. Key sources of data included floristic analyses produced in western regional forest assessments in the BBS and NAN Bioregions, floristic analyses in over 60 surveys of conservation reserves and analysis of plot data in the western NET Bioregion and covering parts of the Namoi and Border Rivers- Gwydir CMA areas. Approximately 60% of the woody native vegetation in the study area has been cleared resulting in large areas of “derived” native grasslands. As of June 2010, 7% of the area was in 136 protected areas and 127 of the 315 plant communities were assessed to be adequately protected in reserves. Using the NSWVCA database threat criteria, 15 plant communities were assessed as being Critically Endangered, 59 Endangered, 60 Vulnerable, 99 Near Threatened and 82 Least Concern. 61 of these communities are assessed as part of NSW or Commonwealth-listed Threatened Ecological Communities. Current threats include expanding dryland and irrigated cropping on alluvial plains, floodplains and gently undulating topography at lower elevations; over-grazing of steep hills; altered water tables and flooding regimes; localized mining; and the spread of exotic species, notably Coolatai Grass (Hyparrhenia hirta)