Two-Phase Oil-Water Empirical Correlation Models for SCAL and Petrophysical Properties in Intermediate Wet Sandstone Reservoirs

A consensus has long been established that the best secondary oil recovery through waterflood is attained in intermediate wet reservoir systems. In the absence of special core analysis (SCAL) data during the initial stages of field evaluation, experimentally-derived correlations are generated in this study for preliminary evaluation purposes. Currently, it is identified that ambiguity exists between petrophysical relationships in intermediate wet reservoirs. Clarifying these relationships provides us with further understanding into maximizing oil recovery in such systems. Hence, the main objective of this study is to analyse and provide further insights into the relationships between petrophysical properties, which are ultimately vital for reservoir simulations. The correlations are generated through linear regression analysis from experimental core measurements. It has been proven that the most reliable correlations are essentially empirical rather than theoretical, especially with the case of relative permeability. The variation of SCAL parameters and correlations generated are studied as a function of wettability, permeability, porosity, initial water saturation and rock type. It is observed that residual oil saturation is moderately correlated to Amott-Harvey wettability in an upward curvilinear relationship while scaled endpoint relative permeability in two-phase oil-water system is strongly and linearly correlated to wettability. When investigating the effects of permeability, one must take into account that having too low or too high value might present anomalies in the correlations. The general trend for intermediate wettability reservoir is that a higher permeability shows a shift towards less water-wet behaviour (shift to oil-wet). Moreover, for initial water saturation and wettability, the trend is towards more water-wet at higher initial water saturation. Meanwhile, porosity is not strongly correlated to any of the parameters except permeability

An optimization framework for sandstone acidizing using design of experiment (DOE) and mathematical modelling

Fluoroboric acid (HBF4) serve as one of the alternatives for conventional mud acid in the application of sandstone wells stimulation. Various parameters such as formation temperature and acid injection velocity would significantly affect the performance of sandstone acidizing and hence determine the success rate of well stimulation. It is therefore undeniable that a deep understanding of the effects of these major parameters are of paramount importance. However, there is a scarcity of data available in the literature regarding the use of HBF4 in sandstone acidizing in comparison to the use of mud acid. In this work, an optimization framework is developed to study the combined effects of formation temperature and acid injection velocity to the change in porosity and pressure drop. Apart from porosity improvement, a pressure drop across the sandstone core would also give an indication to the acidizing performance. The optimization approach is achieved by using design of experiment (DOE) and response surface methodology, coupled with a mechanistic model for sandstone acidizing. The design of experiment used in this work is central composite design (CCD). Meanwhile, the mechanistic model that simulate a flow in porous media is being developed using COMSOL Multi-physics, which is a computational fluid dynamics (CFD) software that uses finite element method (FEM). In this optimization tool, a range of formation temperature was set between 41˚C and 88˚C, whereas the range of acid injection velocity was set between 1.79×10-5 m/s to 3.78×10-5 m/s. According to the results, the optimum condition studied was found out to be 88˚C and 3.78×10-5 m/s. Under such an operating condition, the favourable maximum porosity enhancement and pressure drop profile were obtained. The maximum porosity and pressure drop were up to 17% and 16.6979 kPa respectively. The porosity enhancement and pressure drop in the sandstone core showed an excellent agreement with the data predicted by the model. In general, this optimization study had proven that response surface methodology (RSM) could be applied to determine the acid performance in sandstone acidizing

Investigate a Gas Well Performance Using Nodal Analysis

Gas condensate well has unique reservoir characteristics and ups and downs in well behaviour affect the production rate significantly. A proper optimization can reduce the operating cost, maximize the hydrocarbon recovery and increase the net present value. Well level optimization can be achieved through optimizing well parameters, such as wellhead, tubing size, and skin factor. All of these factors have been investigated using a real field of Thrace Basin and PROSPER simulation program. The history matching data are validated to identify the future performance prediction for the same reservoir deliverability following the period changes. Therefore, predicted results are compared and validated with measured field data to provide the best production practices. Moreover, the results show that the skin factor has a large influence on the production rate by 45% reduction. The reduction in the reservoir pressure declines the production rate dramatically resulted in 70% decline. While manipulating the wellhead pressure shows minor decline compare to tubing size that does not show any significant change to production rate

The effects of concentration and salinity on polymer adsorption isotherm at sandstone rock surface

Adsorption of hydrolyzed polyacrylamide (HPAM) polymers on sandstone rock surface was studied by static adsorption experiments. Total of 10 Runs of static experiments were conducted in test tubes by mixing the desired solution with crushed rock sample, at temperature of 25 °C, and salinity range from 0-4 wt%. The results are in conformity with Langmuir's isotherm. Ten different isotherms were generated at each Run. The initial polymer concentration was varied from 0.3-2.1 g/l. The effects of salinity have been studied by observation on Langmuir adsorption coefficients (Y and K). The results show that the adsorption coefficient (Y) was found to have linear relationship with salinity. The adsorption coefficient (K) was found to be related to salinity by a quadratic relationship

Degradation versus self-assembly of block copolymer micelles

The stability of micelles self-assembled from block copolymers can be altered by the degradation of the blocks. Slow degradation shifts the equilibrium size distribution of block copolymer micelles and change their properties. Quasi-equilibrium scaling theory shows that the degradation of hydrophobic blocks in the core of micelles destabilize the micelles reducing their size, while the degradation of hydrophilic blocks forming coronas of micelles favors larger micelles and may, at certain conditions, induce the formation of micelles from individual chains.Comment: Published in Langmuir http://pubs.acs.org/doi/pdf/10.1021/la204625

Investigation of Changing Pore Topology and Porosity during Matrix Acidizing using Different Chelating Agents

Core flooding acidizing experiments on sandstone/carbonate formation are usually performed in the laboratory to observe different physical phenomena and to design acidizing stimulation jobs for the field. During the tests, some key parameters are analyzed such as pore volume required for breakthrough as well as pressure. Hydrochloric acid (HCl) is commonly used in the carbonate matrix acidizing while Mud acid (HF: HCl) is usually applied during the sandstone acidizing to remove damage around the well bore. However, many problems are associated with the application of these acids, such as fast reaction, corrosion and incompatibility of HCl with some minerals (illite). To overcome these problems, chelating agents (HEDTA, EDTA and GLDA) were used in this research. Colton tight sandstone and Guelph Dolomite core samples were used in this study. The experiments usually are defined in terms of porosity, permeability, dissolution and pore topology. Effluent samples were analyzed to determine dissolved iron, sodium, potassium, calcium and other positive ions using Inductively Coupled Plasma (ICP). Meanwhile Nuclear Magnetic Resonance (NMR) was employed to determine porosity and pore structure of the core sample. Core flood experiments on Berea sandstone cores and dolomite samples with dimensions of 1.5 in × 3 in were conducted at a flow rate of 1 cc/min under 150oF temperature. NMR and porosity analysis concluded that applied chemicals are effective in creating fresh pore spaces. ICP analysis concluded that HEDTA showed good ability to chelate calcium, sodium, magnesium, potassium and iron. It can be established from the analysis that HEDTA can increase more amount of permeability as compared to other chelates

The actin-binding ERM protein Moesin binds to and stabilizes microtubules at the cell cortex

Ezrin, Radixin, and Moesin (ERM) proteins play important roles in many cellular processes including cell division. Recent studies have highlighted the implications of their metastatic potential in cancers. ERM’s role in these processes is largely attributed to their ability to link actin filaments to the plasma membrane. In this paper, we show that the ERM protein Moesin directly binds to microtubules in vitro and stabilizes microtubules at the cell cortex in vivo. We identified two evolutionarily conserved residues in the FERM (4.1 protein and ERM) domains of ERMs that mediated the association with microtubules. This ERM–microtubule interaction was required for regulating spindle organization in metaphase and cell shape transformation after anaphase onset but was dispensable for bridging actin filaments to the metaphase cortex. These findings provide a molecular framework for understanding the complex functional interplay between the microtubule and actin cytoskeletons mediated by ERM proteins in mitosis and have broad implications in both physiological and pathological processes that require ERMs

Self-Organizing Circuit Assembly through Spatiotemporally Coordinated Neuronal Migration within Geometric Constraints

Neurons are dynamically coupled with each other through neurite-mediated adhesion during development. Understanding the collective behavior of neurons in circuits is important for understanding neural development. While a number of genetic and activity-dependent factors regulating neuronal migration have been discovered on single cell level, systematic study of collective neuronal migration has been lacking. Various biological systems are shown to be self-organized, and it is not known if neural circuit assembly is self-organized. Besides, many of the molecular factors take effect through spatial patterns, and coupled biological systems exhibit emergent property in response to geometric constraints. How geometric constraints of the patterns regulate neuronal migration and circuit assembly of neurons within the patterns remains unexplored.We established a two-dimensional model for studying collective neuronal migration of a circuit, with hippocampal neurons from embryonic rats on Matrigel-coated self-assembled monolayers (SAMs). When the neural circuit is subject to geometric constraints of a critical scale, we found that the collective behavior of neuronal migration is spatiotemporally coordinated. Neuronal somata that are evenly distributed upon adhesion tend to aggregate at the geometric center of the circuit, forming mono-clusters. Clustering formation is geometry-dependent, within a critical scale from 200 µm to approximately 500 µm. Finally, somata clustering is neuron-type specific, and glutamatergic and GABAergic neurons tend to aggregate homo-philically.We demonstrate self-organization of neural circuits in response to geometric constraints through spatiotemporally coordinated neuronal migration, possibly via mechanical coupling. We found that such collective neuronal migration leads to somata clustering, and mono-cluster appears when the geometric constraints fall within a critical scale. The discovery of geometry-dependent collective neuronal migration and the formation of somata clustering in vitro shed light on neural development in vivo

Incisional hernia following colorectal cancer surgery according to suture technique: Hughes Abdominal Repair Randomized Trial (HART).

BACKGROUND: Incisional hernias cause morbidity and may require further surgery. HART (Hughes Abdominal Repair Trial) assessed the effect of an alternative suture method on the incidence of incisional hernia following colorectal cancer surgery. METHODS: A pragmatic multicentre single-blind RCT allocated patients undergoing midline incision for colorectal cancer to either Hughes closure (double far-near-near-far sutures of 1 nylon suture at 2-cm intervals along the fascia combined with conventional mass closure) or the surgeon's standard closure. The primary outcome was the incidence of incisional hernia at 1 year assessed by clinical examination. An intention-to-treat analysis was performed. RESULTS: Between August 2014 and February 2018, 802 patients were randomized to either Hughes closure (401) or the standard mass closure group (401). At 1 year after surgery, 672 patients (83.7 per cent) were included in the primary outcome analysis; 50 of 339 patients (14.8 per cent) in the Hughes group and 57 of 333 (17.1 per cent) in the standard closure group had incisional hernia (OR 0.84, 95 per cent c.i. 0.55 to 1.27; P = 0.402). At 2 years, 78 patients (28.7 per cent) in the Hughes repair group and 84 (31.8 per cent) in the standard closure group had incisional hernia (OR 0.86, 0.59 to 1.25; P = 0.429). Adverse events were similar in the two groups, apart from the rate of surgical-site infection, which was higher in the Hughes group (13.2 versus 7.7 per cent; OR 1.82, 1.14 to 2.91; P = 0.011). CONCLUSION: The incidence of incisional hernia after colorectal cancer surgery is high. There was no statistical difference in incidence between Hughes closure and mass closure at 1 or 2 years. REGISTRATION NUMBER: ISRCTN25616490 (http://www.controlled-trials.com)

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Background: Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. // Methods: We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung's disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. // Findings: We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung's disease) from 264 hospitals (89 in high-income countries, 166 in middle-income countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in low-income countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. // Interpretation: Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between low-income, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030