806 research outputs found

    The McMansion effect:Positional externalities in US suburbs

    Get PDF
    This paper examines how the construction of very large homes - or "McMansions" - in U.S. suburbs affects homeowners' satisfaction and housing behavior. Combining three decades of survey data with geolocated information on three million suburban houses, I find that homeowners exposed to newly constructed, large houses report lower satisfaction with their own homes, while their neighborhood satisfaction remains unaffected. This effect is contingent on the visual salience of McMansions, as indicated by their proximity to roads. Homeowners exposed to new-built McMansions are more likely to expand their own homes and take on more debt

    A fluidized granular medium as an instance of the Fluctuation Theorem

    Full text link
    We study the statistics of the power flux into a collection of inelastic beads maintained in a fluidized steady-state by external mechanical driving. The power shows large fluctuations, including frequent large negative fluctuations, about its average value. The relative probabilities of positive and negative fluctuations in the power flux are in close accord with the Fluctuation Theorem of Gallavotti and Cohen, even at time scales shorter than those required by the theorem. We also compare an effective temperature that emerges from this analysis to the kinetic granular temperature.Comment: 4 pages, 5 figures, submited to Physical Review Letters; Revised versio

    Ferromagnetic (Ga,Mn)N epilayers versus antiferromagnetic GaMn3_3N clusters

    Full text link
    Mn-doped wurtzite GaN epilayers have been grown by nitrogen plasma-assisted molecular beam epitaxy. Correlated SIMS, structural and magnetic measurements show that the incorporation of Mn strongly depends on the conditions of the growth. Hysteresis loops which persist at high temperature do not appear to be correlated to the presence of Mn. Samples with up to 2% Mn are purely substitutional Ga1x_{1-x}Mnx_xN epilayers, and exhibit paramagnetic properties. At higher Mn contents, precipitates are formed which are identified as GaMn3_3N clusters by x-ray diffraction and absorption: this induces a decrease of the paramagnetic magnetisation. Samples co-doped with enough Mg exhibit a new feature: a ferromagnetic component is observed up to Tc175T_c\sim175 K, which cannot be related to superparamagnetism of unresolved magnetic precipitates.Comment: Revised versio

    A Coupled Electrical-Thermal-Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at a High Temperature

    No full text
    International audienceA coupled electrical-thermal-mechanical model is proposed aimed at the numerical modeling of Gleeble tension tests at a high temperature. A multidomain, multifield coupling resolution strategy is used for the solution of electrical, energy, and momentum conservation equations by means of the finite element method. Its application to ultra-high-strength steel is considered. After calibration with instrumented experiments, numerical results reveal that significant thermal gradients prevail in Gleeble tensile steel specimen in both axial and radial directions. Such gradients lead to the heterogeneous deformation of the specimen, which is a major difficulty for simple identification techniques of constitutive parameters, based on direct estimations of strain, strain rate, and stress. The proposed direct finite element coupled model can be viewed as an important achievement for subsequent inverse identification methods, which should be used to identify constitutive parameters for steel at a high temperature in the solid state and in the mushy state

    A new improved optimization of perturbation theory: applications to the oscillator energy levels and Bose-Einstein critical temperature

    Full text link
    Improving perturbation theory via a variational optimization has generally produced in higher orders an embarrassingly large set of solutions, most of them unphysical (complex). We introduce an extension of the optimized perturbation method which leads to a drastic reduction of the number of acceptable solutions. The properties of this new method are studied and it is then applied to the calculation of relevant quantities in different ϕ4\phi^4 models, such as the anharmonic oscillator energy levels and the critical Bose-Einstein Condensation temperature shift ΔTc\Delta T_c recently investigated by various authors. Our present estimates of ΔTc\Delta T_c, incorporating the most recently available six and seven loop perturbative information, are in excellent agreement with all the available lattice numerical simulations. This represents a very substantial improvement over previous treatments.Comment: 9 pages, no figures. v2: minor wording changes in title/abstract, to appear in Phys.Rev.

    Structure and magnetism of self-organized Ge(1-x)Mn(x) nano-columns

    Get PDF
    We report on the structural and magnetic properties of thin Ge(1-x)Mn(x)films grown by molecular beam epitaxy (MBE) on Ge(001) substrates at temperatures (Tg) ranging from 80deg C to 200deg C, with average Mn contents between 1 % and 11 %. Their crystalline structure, morphology and composition have been investigated by transmission electron microscopy (TEM), electron energy loss spectroscopy and x-ray diffraction. In the whole range of growth temperatures and Mn concentrations, we observed the formation of manganese rich nanostructures embedded in a nearly pure germanium matrix. Growth temperature mostly determines the structural properties of Mn-rich nanostructures. For low growth temperatures (below 120deg C), we evidenced a two-dimensional spinodal decomposition resulting in the formation of vertical one-dimensional nanostructures (nanocolumns). Moreover we show in this paper the influence of growth parameters (Tg and Mn content) on this decomposition i.e. on nanocolumns size and density. For temperatures higher than 180deg C, we observed the formation of Ge3Mn5 clusters. For intermediate growth temperatures nanocolumns and nanoclusters coexist. Combining high resolution TEM and superconducting quantum interference device magnetometry, we could evidence at least four different magnetic phases in Ge(1-x)Mn(x) films: (i) paramagnetic diluted Mn atoms in the germanium matrix, (ii) superparamagnetic and ferromagnetic low-Tc nanocolumns (120 K 400 K) and (iv) Ge3Mn5 clusters.Comment: 10 pages 2 colonnes revTex formatte

    High In-content InGaN layers synthesized by plasma-assisted molecular-beam epitaxy: growth conditions, strain relaxation and In incorporation kinetics

    Full text link
    We report the interplay between In incorporation and strain relaxation kinetics in high-In-content InxGa1-xN (x = 0.3) layers grown by plasma-assisted molecular-beam epitaxy. For In mole fractions x = 0.13-0.48, best structural and morphological quality is obtained under In excess conditions, at In accumulation limit, and at a growth temperature where InGaN decomposition is active. Under such conditions, in situ and ex situ analysis of the evolution of the crystalline structure with the growth thickness points to an onset of misfit relaxation after the growth of 40 nm, and a gradual relaxation during more than 200 nm which results in an inhomogeneous strain distribution along the growth axis. This process is associated with a compositional pulling effect, i.e. indium incorporation is partially inhibited in presence of compressive strain, resulting in a compositional gradient with increasing In mole fraction towards the surface

    CFD-Tool for Thermal-Hydraulics Pressurised Thermal Shock analysis. Qualification of the Code_Saturne

    Get PDF
    Abstract This paper explains the numerical program concerning the new thermalhydraulic Code_Saturne qualification for Safety Injection studies. Within the frame of the plant life time project, an analysis has shown that the most severe loading conditions are generated by a pressurised injection of cold water in the downcomer of a Reactor Pressure Vessel. For this kind of transients, a thermal hydraulics study has to be carried out in order to better adjust the accurate distribution of the fluid temperature in the downcomer. For that, the numerical tools have to be able to simulate the physical phenomena present during the Pressurised Thermal Shock. (PTS). For this qualification task, we have investigated one configuration related to an injection of cold water particularly in cold leg but also in a downcomer. One experiment test case has been studied and this paper gives a comparison between experiment and numerical results in terms of temperature field

    Signatures of two-dimensionalisation of 3D turbulence in presence of rotation

    Get PDF
    A reason has been given for the inverse energy cascade in the two-dimensionalised rapidly rotating 3D incompressible turbulence. For such system, literature shows a possibility of the exponent of wavenumber in the energy spectrum's relation to lie between -2 and -3. We argue the existence of a more strict range of -2 to -7/3 for the exponent in the case of rapidly rotating turbulence which is in accordance with the recent experiments. Also, a rigorous derivation for the two point third order structure function has been provided helping one to argue that even with slow rotation one gets, though dominated, a spectrum with the exponent -2.87, thereby hinting at the initiation of the two-dimensionalisation effect with rotation.Comment: An extended and typos-corrected version of the earlier submissio

    Exponential Mixing for a Stochastic PDE Driven by Degenerate Noise

    Full text link
    We study stochastic partial differential equations of the reaction-diffusion type. We show that, even if the forcing is very degenerate (i.e. has not full rank), one has exponential convergence towards the invariant measure. The convergence takes place in the topology induced by a weighted variation norm and uses a kind of (uniform) Doeblin condition.Comment: 10 pages, 1 figur
    corecore