121 research outputs found
Hydrothermal alteration mapping of mineralogical imprints associated with subtle geothermal system using mixture tuned matched filtering approach on ASTER VNIR And SWIR data
The purpose of this study is to evaluate the applicability of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Visible near infrared (VNIR) and Shortwave infrared (SWIR) bands in discriminating hydrothermal alteration mineralogy related to thermal springs as proxy for identifying subtle Geothermal (GT) systems at Yankari Park in north eastern Nigeria. The area is characterized by a number of thermal springs including, Gwana, Dimmil, Mawulgo and Wikki which is used directly for recreation and tourism. A Decorrelation Stretch (DCS) transform was initially used on ASTER to highlight alteration zones and generate regions of interest (ROIs) which guided field validation and identification of associated exposed alteration zones. GPS field survey and sampling of hydrothermally altered rocks and laboratory analysis using Analytical Spectral Device (ASD) and X-Ray Diffraction (XRD) is conducted for verification. Observed and validated alteration sites (ROIs) are subsequently used to extract mean image spectra from the ASTER data. We then explored the utility of mean image spectra for mapping subtle mineralogical imprints associated to geothermal systems as proxy for identifying targets in unexplored regions by using the Mixture Tuned Match Filtering (MTMF) algorithm on ASTER VNIR to SWIR spectral subsets. The results indicate that ASTER data could reliably be used for prefeasibility stage narrowing of targets and mapping of subtle alterations using image derived spectra. These could have significant implications especially for mapping unconventional GT systems in unexplored regions
Structural mapping using PALSAR data in the Central Gold Belt, Peninsular Malaysia
The Central Gold Belt (CGB) of Peninsular Malaysia has been investigated to map structural elements associated with gold mineralization using the Phased Array type L-band Synthetic Aperture Radar (PALSAR) satellite remote sensing data. Gold mineralization in this belt is structurally controlled and associatedwith steeply dipping faults and fold hinges. Adaptive local sigma and directional filters were applied to PALSAR data for tracing structural elements associated with gold mineralization. Structural features along the Bentong-Raub Suture Zone have been identified as highly potential areas for gold prospecting. Four sets of lineaments trending N-S, NE-SW, NNW-SSE and ESE-WNWwere identified. Results of this study demonstrate the applicability of PALSAR remote sensing data to assist gold exploration in the CGB particularly in reducing costs related to exploration for epithermal and polymetallic vein-type mineralization in tropical environments
Editorial for the Special Issue Entitled Hyperspectral Remote Sensing from Spaceborne and Low-Altitude Aerial/Drone-Based Platforms—Differences in Approaches, Data Processing Methods, and Applications
A review of geothermal mapping techniques using remotely sensed data
Exploiting geothermal (GT) resources requires first and foremost locating suitable areas for its development. Remote sensing offers a synoptic capability of covering large areas in real time and can cost effectively explore prospective geothermal sites not easily detectable using conventional survey methods, thus can aid in the prefeasibility stages of geothermal exploration. In this paper, we evaluate the techniques and approaches used in literature for the detection of prospective geothermal sites. Observations have indicated that, while thermal temperature anomalies detection have been applicable in areas of magmatic episodes and volcanic activity, poor resolution especially from space borne data is still a challenge. Consequently, thermal anomalies have been detected with some degree of success using airborne data, however, this is mostly in locations of known surface manifestations such as hot springs and fumaroles. The indirect identification of indicator minerals related to geothermal systems have been applied using multispectral and hyperspectral data in many studies. However, the effectiveness of the techniques relies on the sophistication and innovative digital image processing methods employed to sieve out relevant spectral information. The use of algorithms to estimate land surface temperature and heat fluxes are also applied to aid thermal anomaly detection, nevertheless, remote sensing techniques are still complementary to geologic, geophysical and geochemical survey methods. While not the first of its kind, this review is aimed at identifying new developments, with a focus on the trends and limitations intrinsic to the techniques and a look at current gaps and prospects for the future.Keywords: Geothermal, remote sensing, thermal anomalies, indicator minerals, multispectral, hyperspectra
Investigation of Environmental and Biological Effects of Rare Earth Elements (REEs) with a Special Focus on Industrial and Mining Pollutions in Iran: A Review
The present article is a review study on the types of rare earth elements (REEs), environmental and biological effects as well as the sources of emission of these elements as pollution in nature. The purpose of this study is to provide a vision in environmental planning and control of pollution caused by REEs. The evaluation of rare earth elements was studied in human life and its environmental and biological effects, which have particular importance and are entering the life cycle through industrial and mining pollution sources. Since mining activities intensify the dispersion of these elements in the environment and the existence of industrial factories located around urban drainage system plays a unique role in creating and spreading pollution caused by rare earth elements; As a result, two case studies were conducted on two mining and industrial areas. The first case is the Choghart mine in Yazd province as an example of mining pollution,and the second case study is performed on the Kor river as an example of industrial pollution which is caused by industrial activities around it, Then the results are well explained to show both two environments of litho and hydro. Due to this fact that produced environmental pollution can cause exchange pollutant compounds with the surrounding environment besides its long-lasting destructive effects; It can cause irreversible biological effects on living organisms. By targeting this evaluation, several techniques can be proposed to prevent the entry and dispersal of rare earth elements from pollution sources besides methods to reduce the damage of these elements to the ecosystem
Editorial for the Special Issue: Multispectral and Hyperspectral Remote Sensing Data for Mineral Exploration and Environmental Monitoring of Mined Areas
In recent decades, multispectral and hyperspectral remote sensing data provide un-
precedented opportunities for the initial stages of mineral exploration and environmental
hazard monitoring. Increasing demands for minerals because of industrialization and ex-
ponential growth in population emphasize the necessity for replenishing exploited reserves
by exploration of new potential zones of mineral deposits. Identification of host-rock
lithologies, geologic structural features, and hydrothermal alteration mineral zones are
the most conspicuous applications of multispectral and hyperspectral remote sensing satel-
lite data for mineral exploration in the metallogenic provinces and frontier areas around
the world
Orogenic Gold in Transpression and Transtension Zones: Field and Remote Sensing Studies of the Barramiya–Mueilha Sector, Egypt
Multi-sensor satellite imagery data promote fast, cost-efficient regional geological mapping
that constantly forms a criterion for successful gold exploration programs in harsh and inaccessible
regions. The Barramiya–Mueilha sector in the Central Eastern Desert of Egypt contains several
occurrences of shear/fault-associated gold-bearing quartz veins with consistently simple mineralogy
and narrow hydrothermal alteration haloes. Gold-quartz veins and zones of carbonate alteration and
listvenitization are widespread along the ENE–WSW Barramiya–Um Salatit and Dungash–Mueilha
shear belts. These belts are characterized by heterogeneous shear fabrics and asymmetrical or
overturned folds. Sentinel-1, Phased Array type L-band Synthetic Aperture Radar (PALSAR),
Advanced Space borne Thermal Emission and Reflection Radiometer (ASTER), and Sentinel-2 are
used herein to explicate the regional structural control of gold mineralization in the Barramiya–Mueilha
sector. Feature-oriented Principal Components Selection (FPCS) applied to polarized backscatter ratio
images of Sentinel-1 and PALSAR datasets show appreciable capability in tracing along the strike of
regional structures and identification of potential dilation loci. The principal component analysis
(PCA), band combination and band ratioing techniques are applied to the multispectral ASTER and
Sentinel-2 datasets for lithological and hydrothermal alteration mapping. Ophiolites, island arc
rocks, and Fe-oxides/hydroxides (ferrugination) and carbonate alteration zones are discriminated
by using the PCA technique. Results of the band ratioing technique showed gossan, carbonate, and
hydroxyl mineral assemblages in ductile shear zones, whereas irregular ferrugination zones are
locally identified in the brittle shear zones. Gold occurrences are confined to major zones of fold
superimposition and transpression along flexural planes in the foliated ophiolite-island arc belts.
In the granitoid-gabbroid terranes, gold-quartz veins are rather controlled by fault and brittle shear
zones. The uneven distribution of gold occurrences coupled with the variable recrystallization of
the auriferous quartz veins suggests multistage gold mineralization in the area. Analysis of the host
structures assessed by the remote sensing results denotes vein formation spanning the time–space
from early transpression to late orogen collapse during the protracted tectonic evolution of the belt
Shear-Related Gold Ores in the Wadi Hodein Shear Belt, South Eastern Desert of Egypt: Analysis of Remote Sensing, Field and Structural Data
Space-borne multispectral and radar data were used to comprehensively map geologi-
cal contacts, lithologies and structural elements controlling gold-bearing quartz veins in the Wadi
Hodein area in Egypt. In this study, enhancement algorithms, band combinations, band math (BM),
Principal Component Analysis (PCA), decorrelation stretch and mineralogical indices were applied
to Landsat-8 OLI, ASTER and ALOS PALSAR following a pre-designed flow chart. Together with
the field observations, the results of the image processing techniques were exported to the GIS
environment and subsequently fused to generate a potentiality map. The Wadi Hodein shear belt is
a ductile shear corridor developed in response to non-coaxial convergence and northward escape
tectonics that accompanied the final stages of terrane accretion and cratonization (~680–600 Ma)
in the northern part of the Arabian–Nubian Shield. The evolution of this shear belt encompassed
a protracted ~E–W shortening and recurrent sinistral transpression as manifested by east-dipping
thrusts and high-angle reverse shear zones. Gold-mineralized shear zones cut heterogeneously de-
formed ophiolites and metavolcaniclastic rocks and attenuate in and around granodioritic intrusions.
The gold mineralization event was evidently epigenetic in the metamorphic rocks and was likely
attributed to rejuvenated tectonism and circulation of hot fluids during transpressional deformation.
The superposition of the NW–SE folds by NNW-trending, kilometer scale tight and reclined folds
shaped the overall framework of the Wadi Hodein belt. Shallow NNW- or SSE-plunging mineral and
stretching lineations on steeply dipping shear planes depict a considerable simple shear component.
The results of image processing complying with field observations and structural analysis suggest
that the coincidence of shear zones, hydrothermal alteration and crosscutting dikes in the study area
could be considered as a model criterion in exploration for new gold targets
Geochemical relations among elements in stream sediment samples from Siojan Prospecting Area, Iran using geostatistical methods
Stream sediment samples play an important role in identifying potential areas of metallic and non-metallic mineralization in mineral exploration studies. The relationship of geochemical elements with each other shows how the elements are distributed in the area. Also, by identifying related elements, sampling and targeted chemical analysis can be used in the next stages of exploration. The purpose of this study is to investigate the elements related to the copper element in the Siojan prospecting area, which is located in South-Khorasan province and 30 km northwest of Birjand city of Iran. In Siojan area, 120 stream sediment samples of a 60 square kilometer area were collected to detect geochemical anomalies and were consequently analyzed by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for 45 elements. Preliminary geological studies showed that the studied area has copper mineralization potential, and therefore, copper was selected as the target element in this study. Copper trace elements were identified in the area and the results were used to identify copper mineralized anomalies. For the elemental analysis data, methods of Principal Component Analysis (PCA), Factor Analysis (FA), Hierarchical Cluster Analysis (HCA) and K-Means Clustering were performed to identify the relevant elements and relationships among them. Statistical analysis of the concentration of geochemical elements in the region revealed that copper and cobalt elements were identified as two elements of the same family in terms of geochemical genetics. The average value for copper and cobalt elements in the analyzed samples was 27.2 ppm and 15.5 ppm, respectively. Finally, the relationship between copper and cobalt elements was modeled as an equation using the K-Means Clustering algorithm
- …