Inversion of Randomly Corrugated Surfaces Structure from Atom Scattering Data

The Sudden Approximation is applied to invert structural data on randomly corrugated surfaces from inert atom scattering intensities. Several expressions relating experimental observables to surface statistical features are derived. The results suggest that atom (and in particular He) scattering can be used profitably to study hitherto unexplored forms of complex surface disorder.Comment: 10 pages, no figures. Related papers available at http://neon.cchem.berkeley.edu/~dan

General model with experimental validation of electrical resonant frequency tuning of electromagnetic vibration energy harvesters

This paper presents a general model and its experimental validation for electrically tunable electromagnetic energy harvesters. Electrical tuning relies on the adjustment of the electrical load so that the maximum output power of the energy harvester occurs at a frequency which is different from the mechanical resonant frequency of the energy harvester. Theoretical analysis shows that for this approach to be feasible the electromagnetic vibration energy harvester’s coupling factor must be maximized so that its resonant frequency can be tuned with the minimum decrease of output power. Two different-sized electromagnetic energy harvesters were built and tested to validate the model. Experimentally, the micro-scale energy harvester has a coupling factor of 0.0035 and an untuned resonant frequency of 70.05 Hz. When excited at 30 mg, it was tuned by 0.23 Hz by changing its capacitive load from 0 to 4000 nF; its effective tuning range is 0.15 Hz for a capacitive load variation from 0 to 1500 nF. The macro-scale energy harvester has a coupling factor of 552.25 and an untuned resonant frequency of 95.1 Hz and 95.5 Hz when excited at 10 mg and 25 mg, respectively. When excited at 10 mg, it was tuned by 3.8 Hz by changing its capacitive load from 0 to 1400 nF; it has an effective tuning range of 3.5 Hz for a capacitive load variation from 0 to 1200 nF. When excited at 25 mg, its resonant frequency was tuned by 4.2 Hz by changing its capacitive load from 0 to 1400 nF; it has an effective tuning range of about 5 Hz. Experimental results were found to agree with the theoretical analysis to within 10%

Integrating flexible filament circuits for e‐textile applications

Practical wearable e‐textiles must be durable and retain, as far as possible, the textile properties such as drape, feel, lightweight, breathability, and washability that make fabrics suitable for clothing. Early e‐textile garments were realized by inserting standard portable electronic devices into bespoke pockets and arranging interconnects and cabling across the garment. In these examples, the textile merely served as a vehicle to house the electronics and had no inherent electronic functionality. A reduction in electronic component size, the development of flexible circuits, and the ability to weave robust interconnects offer the potential for improved levels of electronic integration within the textile. The weaving of electronic circuit filaments less than 2 mm wide into fabrics such that the electronics are fully concealed in the textile and given extra protection by the surrounding textile fibers is introduced. The failure mechanisms for different filament circuit designs before and after integration into the textile are investigated with a 90° cyclical bending test. Results show that encapsulated filament circuits embedded within the textile survive 45 washing cycles and more than 1500 cycles of 90° bending around a bending radius of 10 mm, performing five times better than equivalent filament circuits before integration into the fabric

Performance limits of the three MEMS inertial energy generator transduction types

Accepted versio

Design and analysis of vibration energy harvesters based on peak response statistics

Energy harvesting using cantilever piezoelectric vibration energy harvesters excited by Gaussian broadband random base excitation is considered. The optimal design and analysis of energy harvesters under random excitation is normally performed using the mean and standard deviation of a response quantity of interest, such as the voltage. An alternative approach based on the statistics of the peak voltage is developed in this paper. Three extreme response characteristics, namely (a) level crossing, (b) response peaks above certain level, and (c) fractional time spend above a certain level, have been employed. Two cases, namely the harvesting circuit with and without an inductor, have been considered. Exact closed-form expressions have been derived for number of level crossings, statistics of response peaks and fractional time spend above a certain level for the output voltage. It is shown that these quantities can be related to the standard deviation of the voltage and its derivative with respect to time. Direct numerical simulation has been used to validate the analytical expressions. Based on the analytical results, closed-form expressions for optimal system parameters have been proposed. Numerical examples are given to illustrate the applicability of the analytical results

Design, analysis, and feedback control of a nonlinear micro-piezoelectric–electrostatic energy harvester

A nonlinear micro-piezoelectric–electrostatic energy harvester is designed and studied using mathematical and computational methods. The system consists of a cantilever beam substrate, a bimorph piezoelectric transducer, a pair of tuning parallel-plate capacitors, and a tip–mass. The governing nonlinear mathematical model of the electro-mechanical system including nonlinear material and quadratic air-damping is derived for the series connection of the piezoelectric layers. The static and modal frequency curves are computed to optimize the operating point, and a parametric study is performed using numerical methods. A bias DC voltage is used to adapt the system to resonate with respect to the frequency of external vibration. Furthermore, to improve the bandwidth and performance of the harvester (and achieve a high level of harvested power without sacrificing the bandwidth), a nonlinear feedback loop is integrated into the design

Sporulation, bacterial cell envelopes, and the origin of life

Electron cryotomography (ECT) enables the 3D reconstruction of intact cells in a near-native state. Images produced by ECT have led to the proposal that an ancient sporulation-like event gave rise to the second membrane in diderm bacteria. Tomograms of sporulating monoderm and diderm bacterial cells show how sporulation can lead to the generation of diderm cells. Tomograms of Gram-negative and Gram-positive cell walls and purified sacculi suggest that they are more closely related than previously thought and support the hypothesis that they share a common origin. Mapping the distribution of cell envelope architectures onto a recent phylogenetic tree of life indicates that the diderm cell plan, and therefore the sporulation-like event that gave rise to it, must be very ancient. One explanation for this model is that during the cataclysmic transitions of the early Earth, cellular evolution may have gone through a bottleneck in which only spores survived, which implies that the last bacterial common ancestor was a spore