21 research outputs found
TiO2/BiVO4 Nanowire Heterostructure Photoanodes Based on Type II Band Alignment
Metal oxides that absorb visible light are attractive for use as photoanodes in photoelectrosynthetic cells. However, their performance is often limited by poor charge carrier transport. We show that this problem can be addressed by using separate materials for light absorption and carrier transport. Here, we report a Ta:TiO2|BiVO4 nanowire photoanode, in which BiVO4 acts as a visible light-absorber and Ta:TiO2 acts as a high surface area electron conductor. Electrochemical and spectroscopic measurements provide experimental evidence for the type II band alignment necessary for favorable electron transfer from BiVO4 to TiO2. The host–guest nanowire architecture presented here allows for simultaneously high light absorption and carrier collection efficiency, with an onset of anodic photocurrent near 0.2 V vs RHE, and a photocurrent density of 2.1 mA/cm2 at 1.23 V vs RHE
Recommended from our members
Room-Temperature Dynamics of Vanishing Copper Nanoparticles Supported on Silica
In
heterogeneous catalysis, a nanoparticle (NP) system has immediate
chemical surroundings with which its interaction needs to be considered,
as nanoparticles are typically loaded onto certain supports. Beyond
what is known about these interactions, dynamic atomic interactions
between the nanoparticle and support could result from the increased
energetics at the nanoscale. Here, we show that the dynamic response
of atoms in copper nanoparticles to the underlying silica support
at room temperature and ambient atmosphere results in the complete
disappearance of supported nanoparticles over the course of only a
few weeks. A quantitative study of copper nanoparticles at various
size regimes (6–17 nm) revealed the significance of size-dependent
nanoparticle energetics to the interaction with the support. Extended
X-ray absorption fine structure is used to show that copper atoms
could readily diffuse into the support to be locally surrounded by
oxygen and silicon with structurally disordered outer coordination
shells. Increased energetic states at the nanoscale and the energetically
favorable configuration of individual copper atoms within silica,
identified through EXAFS, are suggested as the cause of nanoparticle
disappearance. This unexpected observation opens up new questions
as to how nanoparticles interact with surrounding environments that
could fundamentally change our conventional view of supported nanoparticle
systems
Recommended from our members
Anisotropic phase segregation and migration of Pt in nanocrystals en route to nanoframe catalysts.
Compositional heterogeneity in shaped, bimetallic nanocrystals offers additional variables to manoeuvre the functionality of the nanocrystal. However, understanding how to manipulate anisotropic elemental distributions in a nanocrystal is a great challenge in reaching higher tiers of nanocatalyst design. Here, we present the evolutionary trajectory of phase segregation in Pt-Ni rhombic dodecahedra. The anisotropic growth of a Pt-rich phase along the 〈111〉 and 〈200〉 directions at the initial growth stage results in Pt segregation to the 14 axes of a rhombic dodecahedron, forming a highly branched, Pt-rich tetradecapod structure embedded in a Ni-rich shell. With longer growth time, the Pt-rich phase selectively migrates outwards through the 14 axes to the 24 edges such that the rhombic dodecahedron becomes a Pt-rich frame enclosing a Ni-rich interior phase. The revealed anisotropic phase segregation and migration mechanism offers a radically different approach to fabrication of nanocatalysts with desired compositional distributions and performance
Recommended from our members
Electrochemical Activation of CO2 through Atomic Ordering Transformations of AuCu Nanoparticles.
Precise control of elemental configurations within multimetallic nanoparticles (NPs) could enable access to functional nanomaterials with significant performance benefits. This can be achieved down to the atomic level by the disorder-to-order transformation of individual NPs. Here, by systematically controlling the ordering degree, we show that the atomic ordering transformation, applied to AuCu NPs, activates them to perform as selective electrocatalysts for CO2 reduction. In contrast to the disordered alloy NP, which is catalytically active for hydrogen evolution, ordered AuCu NPs selectively converted CO2 to CO at faradaic efficiency reaching 80%. CO formation could be achieved with a reduction in overpotential of ∼200 mV, and catalytic turnover was enhanced by 3.2-fold. In comparison to those obtained with a pure gold catalyst, mass activities could be improved as well. Atomic-level structural investigations revealed three atomic gold layers over the intermetallic core to be sufficient for enhanced catalytic behavior, which is further supported by DFT analysis
Recommended from our members
Ultrathin Epitaxial Cu@Au Core-Shell Nanowires for Stable Transparent Conductors.
Copper nanowire networks are considered a promising alternative to indium tin oxide as transparent conductors. The fast degradation of copper in ambient conditions, however, largely overshadows their practical applications. Here, we develop the synthesis of ultrathin Cu@Au core-shell nanowires using trioctylphosphine as a strong binding ligand to prevent galvanic replacement reactions. The epitaxial overgrowth of a gold shell with a few atomic layers on the surface of copper nanowires can greatly enhance their resistance to heat (80 °C), humidity (80%) and air for at least 700 h, while their optical and electrical performance remained similar to the original high-performance copper (e.g., sheet resistance 35 Ω sq-1 at transmittance of ∼89% with a haze factor <3%). The precise engineering of core-shell nanostructures demonstrated in this study offers huge potential to further explore the applications of copper nanowires in flexible and stretchable electronic and optoelectronic devices
Recommended from our members
Operando spectroscopic analysis of an amorphous cobalt sulfide hydrogen evolution electrocatalyst.
The generation of chemical fuel in the form of molecular H2 via the electrolysis of water is regarded to be a promising approach to convert incident solar power into an energy storage medium. Highly efficient and cost-effective catalysts are required to make such an approach practical on a large scale. Recently, a number of amorphous hydrogen evolution reaction (HER) catalysts have emerged that show promise in terms of scalability and reactivity, yet remain poorly understood. In this work, we utilize Raman spectroscopy and X-ray absorption spectroscopy (XAS) as a tool to elucidate the structure and function of an amorphous cobalt sulfide (CoSx) catalyst. Ex situ measurements reveal that the as-deposited CoSx catalyst is composed of small clusters in which the cobalt is surrounded by both sulfur and oxygen. Operando experiments, performed while the CoSx is catalyzing the HER, yield a molecular model in which cobalt is in an octahedral CoS2-like state where the cobalt center is predominantly surrounded by a first shell of sulfur atoms, which, in turn, are preferentially exposed to electrolyte relative to bulk CoS2. We surmise that these CoS2-like clusters form under cathodic polarization and expose a high density of catalytically active sulfur sites for the HER