70,518 research outputs found

    Energy Model of Networks-on-Chip and a Bus

    Get PDF
    A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon-Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a near optimal run-time mapping (from an energy point of view) of inter-process communication to NoC link

    Extended Abstract: Analysis of 1000 Arbiter PUF based RFID Tags

    Get PDF
    In this extended abstract a large-scale analysis of 4- way Arbiter PUFs is performed with measurement results from 1000 RFID tags. Arbiter PUFs are one of the most important building blocks in PUF-based protocols and have been the subject of many papers. However, in the past often only software simulations or a limited number of test chips were available for analysis. Therefore, the goal of this work is to verify earlier findings in regard to the uniqueness and reliability of Arbiter PUFs by using a much larger measurement set. Furthermore, we used machine learning algorithms to approximate and compare the internal delay differences of the employed PUF. One of the main research questions in this paper is to examine if any “outliers” occurred, i.e., if some tags performed considerably different. This might for example happen due to some unusual manufacturing variations or faults. However, our findings are that for all of the analyzed tags the parameters fell within the range of a Gaussian distribution without significant outliers. Hence, our results are indeed in line with the results of prior work

    Development of non-linear finite element computer code

    Get PDF
    Recent work has shown that the use of separable symmetric functions of the principal stretches can adequately describe the response of certain propellant materials and, further, that a data reduction scheme gives a convenient way of obtaining the values of the functions from experimental data. Based on representation of the energy, a computational scheme was developed that allows finite element analysis of boundary value problems of arbitrary shape and loading. The computational procedure was implemental in a three-dimensional finite element code, TEXLESP-S, which is documented herein

    Echo states for detailed fluctuation theorems

    Full text link
    Detailed fluctuation theorems are statements about the probability distribution for the stochastic entropy production along a trajectory. It involves the consideration of a suitably transformed dynamics, such as the time reversed, the adjoint, or a combination of these. We identify specific, typically unique, initial conditions, called echo states, for which the final probability distribution of the transformed dynamics reproduces the initial distribution. In this case the detailed fluctuation theorems relate the stochastic entropy production of the direct process to that of the transformed one. We illustrate our results by an explicit analytical calculation and numerical simulations for a modulated two-state quantum dot.Comment: 8 pages, 6 figures, published versio

    Trojans in Early Design Steps—An Emerging Threat

    Get PDF
    Hardware Trojans inserted by malicious foundries during integrated circuit manufacturing have received substantial attention in recent years. In this paper, we focus on a different type of hardware Trojan threats: attacks in the early steps of design process. We show that third-party intellectual property cores and CAD tools constitute realistic attack surfaces and that even system specification can be targeted by adversaries. We discuss the devastating damage potential of such attacks, the applicable countermeasures against them and their deficiencies

    Host Galaxies of Young Dust-Reddened Quasars

    Get PDF
    We present results on a multiwavelength campaign to identify the nature of dust-reddened Type 1 quasars. These quasars were selected by matching FIRST, 2MASS and very red optical counterparts with r' − K > 5. We find a very high fraction of Low Ionization Broad Absorption Line Quasars (LoBALs) among AGN selected with this method, perhaps a sign of quasar feedback. From X-ray observations and Balmer decrement measurements, the obscuring dust is most likely located in a cold absorber such as the host galaxy, rather than from a torus near the AGN. Hubble ACS imaging of a sub-sample of these sources showed a very high fraction of interacting and merging systems. The quasars appear to be very young in which dust from the merging galaxies is still settling in. Spitzer IRS and MIPS data show star formation signatures and deep Silicate absorption features in these objects, but overall the quasar is the dominant source in the Mid-infrared

    Magnetoelectric properties of A2A_2[FeCl5_5(H2_2O)] with A=A = K, Rb, Cs

    Full text link
    The compounds A2A_2[FeCl5_5(H2_2O)] with A=A= K, Rb, Cs are identified as new linear magnetoelectric materials. We present a detailed investigation of their linear magnetoelectric properties by measurements of pyroelectric currents, dielectric constants and magnetization. The anisotropy of the linear magnetoelectric effect of the K-based and Rb-based compound is consistent with the magnetic point group mmmm'm'm', already reported in literature. A symmetry analysis of the magnetoelectric effect of the Cs-based compound allows to determine the magnetic point group mmmmmm' and to develop a model for its magnetic structure. In addition, magnetic-field versus temperature phase diagrams are derived and compared to the closely related multiferroic (NH4_4)2_2[FeCl5_5(H2_2O)].Comment: 17 pages, 10 figures (updated to the weakly revised version that has been accepted for publication

    Quantum Gravity Corrections for Schwarzschild Black Holes

    Get PDF
    We consider the Matrix theory proposal describing eleven-dimensional Schwarzschild black holes. We argue that the Newtonian potential between two black holes receives a genuine long range quantum gravity correction, which is finite and can be computed from the supergravity point of view. The result agrees with Matrix theory up to a numerical factor which we have not computed.Comment: 14 pages, Tex, no figure

    Scanning tunneling spectroscopy of a dilute two-dimensional electron system exhibiting Rashba spin splitting

    Full text link
    Using scanning tunneling spectroscopy (STS) at 5 K in B-fields up to 7 T, we investigate the local density of states of a two-dimensional electron system (2DES) created by Cs adsorption on p-type InSb(110). The 2DES, which in contrast to previous STS studies exhibits a 2D Fermi level, shows standing waves at B = 0 T with corrugations decreasing with energy and with wave numbers in accordance with theory. In magnetic field percolating drift states are observed within the disorder broadened Landau levels. Due to the large electric field perpendicular to the surface, a beating pattern of the Landau levels is found and explained quantitatively by Rashba spin splitting within the lowest 2DES subband. The Rashba splitting does not contribute significantly to the standing wave patterns in accordance with theory.Comment: 9 pages, 9 figures, submitted to Phys. Rev.
    corecore