990 research outputs found
Algorithms for optimizing drug therapy
BACKGROUND: Drug therapy has become increasingly efficient, with more drugs available for treatment of an ever-growing number of conditions. Yet, drug use is reported to be sub optimal in several aspects, such as dosage, patient's adherence and outcome of therapy. The aim of the current study was to investigate the possibility to optimize drug therapy using computer programs, available on the Internet. METHODS: One hundred and ten officially endorsed text documents, published between 1996 and 2004, containing guidelines for drug therapy in 246 disorders, were analyzed with regard to information about patient-, disease- and drug-related factors and relationships between these factors. This information was used to construct algorithms for identifying optimum treatment in each of the studied disorders. These algorithms were categorized in order to define as few models as possible that still could accommodate the identified factors and the relationships between them. The resulting program prototypes were implemented in HTML (user interface) and JavaScript (program logic). RESULTS: Three types of algorithms were sufficient for the intended purpose. The simplest type is a list of factors, each of which implies that the particular patient should or should not receive treatment. This is adequate in situations where only one treatment exists. The second type, a more elaborate model, is required when treatment can by provided using drugs from different pharmacological classes and the selection of drug class is dependent on patient characteristics. An easily implemented set of if-then statements was able to manage the identified information in such instances. The third type was needed in the few situations where the selection and dosage of drugs were depending on the degree to which one or more patient-specific factors were present. In these cases the implementation of an established decision model based on fuzzy sets was required. Computer programs based on one of these three models could be constructed regarding all but one of the studied disorders. The single exception was depression, where reliable relationships between patient characteristics, drug classes and outcome of therapy remain to be defined. CONCLUSION: Algorithms for optimizing drug therapy can, with presumably rare exceptions, be developed for any disorder, using standard Internet programming methods
On the behaviour of lung tissue under tension and compression
Lung injuries are common among those who suffer an impact or trauma. The relative severity of injuries up to physical tearing of tissue have been documented in clinical studies. However, the specific details of energy required to cause visible damage to the lung parenchyma are lacking. Furthermore, the limitations of lung tissue under simple mechanical loading are also not well documented. This study aimed to collect mechanical test data from freshly excised lung, obtained from both Sprague-Dawley rats and New Zealand White rabbits. Compression and tension tests were conducted at three different strain rates: 0.25, 2.5 and 25 min−1. This study aimed to characterise the quasi-static behaviour of the bulk tissue prior to extending to higher rates. A nonlinear viscoelastic analytical model was applied to the data to describe their behaviour. Results exhibited asymmetry in terms of differences between tension and compression. The rabbit tissue also appeared to exhibit stronger viscous behaviour than the rat tissue. As a narrow strain rate band is explored here, no conclusions are being drawn currently regarding the rate sensitivity of rat tissue. However, this study does highlight both the clear differences between the two tissue types and the important role that composition and microstructure can play in mechanical response
Predator Mimicry: Metalmark Moths Mimic Their Jumping Spider Predators
Cases of mimicry provide many of the nature's most convincing examples of natural selection. Here we report evidence for a case of predator mimicry in which metalmark moths in the genus Brenthia mimic jumping spiders, one of their predators. In controlled trials, Brenthia had higher survival rates than other similarly sized moths in the presence of jumping spiders and jumping spiders responded to Brenthia with territorial displays, indicating that Brenthia were sometimes mistaken for jumping spiders, and not recognized as prey. Our experimental results and a review of wing patterns of other insects indicate that jumping spider mimicry is more widespread than heretofore appreciated, and that jumping spiders are probably an important selective pressure shaping the evolution of diurnal insects that perch on vegetation
Update on HER-2 as a target for cancer therapy: The ERBB2 promoter and its exploitation for cancer treatment
Overexpression of the ERBB2 proto-oncogene is associated with amplification of the gene in breast cancer but increased activity of the promoter also plays a significant role. Members of two transcription factor families (AP-2 and Ets) show increased binding to the promoter in over-expressing cells. Consequently, strategies have been devised to target promoter activity, either through the DNA binding sites for these factors, or through another promoter sequence, a polypurine-polypyrimidine repeat structure. The promoter has also been exploited for its tumour-specific activity to direct the accumulation of cytotoxic compounds selectively within cancer cells. Our current understanding of the ERBB2 promoter is reviewed and the status of these therapeutic avenues is discussed
In Situ Ambient Pressure X-ray Photoelectron Spectroscopy Studies of Lithium-Oxygen Redox Reactions
The lack of fundamental understanding of the oxygen reduction and oxygen evolution in nonaqueous electrolytes significantly hinders the development of rechargeable lithium-air batteries. Here we employ a solid-state Li4+xTi5O12/LiPON/LixV2O5 cell and examine in situ the chemistry of Li-O2 reaction products on LixV2O5 as a function of applied voltage under ultra high vacuum (UHV) and at 500 mtorr of oxygen pressure using ambient pressure X-ray photoelectron spectroscopy (APXPS). Under UHV, lithium intercalated into LixV2O5 while molecular oxygen was reduced to form lithium peroxide on LixV2O5 in the presence of oxygen upon discharge. Interestingly, the oxidation of Li2O2 began at much lower overpotentials (~240 mV) than the charge overpotentials of conventional Li-O2 cells with aprotic electrolytes (~1000 mV). Our study provides the first evidence of reversible lithium peroxide formation and decomposition in situ on an oxide surface using a solid-state cell, and new insights into the reaction mechanism of Li-O2 chemistry.National Science Foundation (U.S.) (Materials Research Science and Engineering Center (MRSEC) Program, Award DMR-0819762)United States. Dept. of Energy (Assistant Secretary for Energy Efficiency and Renewable Energy, Office of FreedomCAR and Vehicle Technologies of the U. S. Department of Energy under contract no. DE-AC03-76SF00098)Lawrence Berkeley National LaboratoryUnited States. Dept. of Energy (Office of Basic Energy Sciences, Materials Sciences and Engineering
Embedded Weapons-Grade Tungsten Alloy Shrapnel Rapidly Induces Metastatic High-Grade Rhabdomyosarcomas in F344 Rats
Continuing concern regarding the potential health and environmental effects of depleted uranium and lead has resulted in many countries adding tungsten alloy (WA)-based munitions to their battlefield arsenals as replacements for these metals. Because the alloys used in many munitions are relatively recent additions to the list of militarily relevant metals, very little is known about the health effects of these metals after internalization as embedded shrapnel. Previous work in this laboratory developed a rodent model system that mimicked shrapnel loads seen in wounded personnel from the 1991 Persian Gulf War. In the present study, we used that system and male F344 rats, implanted intramuscularly with pellets (1 mm × 2 mm cylinders) of weapons-grade WA, to simulate shrapnel wounds. Rats were implanted with 4 (low dose) or 20 pellets (high dose) of WA. Tantalum (20 pellets) and nickel (20 pellets) served as negative and positive controls, respectively. The high-dose WA-implanted rats (n = 46) developed extremely aggressive tumors surrounding the pellets within 4–5 months after implantation. The low-dose WA-implanted rats (n = 46) and nickel-implanted rats (n = 36) also developed tumors surrounding the pellets but at a slower rate. Rats implanted with tantalum (n = 46), an inert control metal, did not develop tumors. Tumor yield was 100% in both the low- and high-dose WA groups. The tumors, characterized as high-grade pleomorphic rhabdomyosarcomas by histopathology and immunohistochemical examination, rapidly metastasized to the lung and necessitated euthanasia of the animal. Significant hematologic changes, indicative of polycythemia, were also observed in the high-dose WA-implanted rats. These changes were apparent as early as 1 month postimplantation in the high-dose WA rats, well before any overt signs of tumor development. These results point out the need for further studies investigating the health effects of tungsten and tungsten-based alloys
Duality covariant non-BPS first order systems
We study extremal black hole solutions to four dimensional N=2 supergravity
based on a cubic symmetric scalar manifold. Using the coset construction
available for these models, we define the first order flow equations implied by
the corresponding nilpotency conditions on the three-dimensional scalar momenta
for the composite non-BPS class of multi-centre black holes. As an application,
we directly solve these equations for the single-centre subclass, and write the
general solution in a manifestly duality covariant form. This includes all
single-centre under-rotating non-BPS solutions, as well as their
non-interacting multi-centre generalisations.Comment: 31 pages, v2: Discussion of the quadratic constraint clarified,
references added, typos corrected, published versio
Environmental Determinants of Infectious Disease: A Framework for Tracking Causal Links and Guiding Public Health Research
BACKGROUND: Discoveries that emerging and re-emerging pathogens have their origin in environmental change has created an urgent need to understand how these environmental changes impact disease burden. In this article we present a framework that provides a context from which to examine the relationship between environmental changes and disease transmission and a structure from which to unite disparate pieces of information from a variety of disciplines. METHODS: The framework integrates three interrelated characteristics of environment–disease relationships: a) Environmental change manifests in a complex web of ecologic and social factors that may ultimately impact disease; these factors are represented as those more distally related and those more proximally related to disease. b) Transmission dynamics of infectious pathogens mediate the effects that environmental changes have on disease. c) Disease burden is the outcome of the interplay between environmental change and the transmission cycle of a pathogen. RESULTS: To put this framework into operation, we present a matrix formulation as a means to define important elements of this system and to summarize what is known and unknown about the these elements and their relationships. The framework explicitly expresses the problem at a systems level that goes beyond the traditional risk factor analysis used in public health, and the matrix provide
Differences in tidal breathing between infants with chronic lung diseases and healthy controls
BACKGROUND: The diagnostic value of tidal breathing (TB) measurements in infants is controversially discussed. The aim of this study was to investigate to what extent the breathing pattern of sleeping infants with chronic lung diseases (CLD) differ from healthy controls with the same postconceptional age and to assess the predictive value of TB parameters. METHODS: In the age of 36–42 postconceptional weeks TB measurements were performed in 48 healthy newborns (median age and weight 7d, 3100 g) and 48 infants with CLD (80d, 2465 g)) using the deadspace-free flow-through technique. Once the infants had adapted to the mask and were sleeping quietly and breathing regularly, 20–60 breathing cycles were evaluated. Beside the shape of the tidal breathing flow-volume loop (TBFVL) 18 TB parameters were analyzed using ANOVA with Bonferroni correction. Receiver-operator characteristic (ROC) curves were calculated to investigate the discriminative ability of TB parameters. RESULTS: The incidence of concave expiratory limbs in CLD infants was 31% and significantly higher compared to controls (2%) (p < 0.001). Significant differences between CLD infants and controls were found in 11/18 TB parameters. The largest differences were seen in the mean (SD) inspiratory time 0.45(0.11)s vs. 0.65(0.14)s (p < 0.0001) and respiratory rate (RR) 55.4(14.2)/min vs. 39.2(8.6)/min (p < 0.0001) without statistically significant difference in the discriminative power between both time parameters. Most flow parameters were strongly correlated with RR so that there is no additional diagnostic value. No significant differences were found in the tidal volume and commonly used TB parameters describing the expiratory flow profile. CONCLUSION: The breathing pattern of CLD infants differs significantly from that of healthy controls. Concave TBFVL and an increased RR measured during quiet sleep and under standardized conditions may indicate diminished respiratory functions in CLD infants whereas most of the commonly used TB parameters are poorly predictive
Electromagnetic fields in biological studies
For biological or cellular experiments using electromagnetic fields, it is essential that the parameters defining the field be carefully specified if the results are to be meaningful and are to be compared with the same experiment conducted in a different laboratory. The interaction of living systems with electric and magnetic fields can come only through forces exerted on the charges on the system. If the charges are stationary, the only origin of the force is the electric field. This electric field may be established by charge distributions, as in “capacitive plate” experiments, or by time-varying magnetic fields.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/43995/1/10439_2006_Article_BF00000002.pd
- …