Silicon film solar cell process

The most promising way to reduce the cost of silicon in solar cells while still maintaining performance is to utilize thin films (10 to 20 microns thick) of crystalline silicon. The method of solution growth is being employed to grow thin polycrystalline films of silicon on dissimilar substrates. The initial results indicate that, using tin as the solvent, this growth process only requires operating temperatures in the range of 800 C to 1000 C. Growth rates in the range of 0.4 to 2.0 microns per minute and grain sizes in the range of 20 to 100 microns were achieved on both quartz and coated steel substrates. Typically, an aspect ratio of two to three between the width and the Si grain thickness is seen. Uniform coverage of Si growth on quartz over a 2.5 x 2.5 cm area was observed

GaAsP on GaP top solar cells

GaAsP on GaP top solar cells as an attachment to silicon bottom solar cells are being developed. The GaAsP on GaP system offers several advantages for this top solar cell. The most important is that the gallium phosphide substrate provides a rugged, transparent mechanical substrate which does not have to be removed or thinned during processing. Additional advantages are that: (1) gallium phosphide is more oxidation resistant than the III-V aluminum compounds, (2) a range of energy band gaps higher than 1.75 eV is readily available for system efficiency optimization, (3) reliable ohmic contact technology is available from the light-emitting diode industry, and (4) the system readily lends itself to graded band gap structures for additional increases in efficiency

Arkansas Cotton Variety Test 2016

The primary goal of the Arkansas Cotton Variety Test is to provide unbiased data regarding the agronomic performance of cotton varieties and advanced breeding lines in the major cotton-growing areas of Arkansas

Minimum-error discrimination between three mirror-symmetric states

We present the optimal measurement strategy for distinguishing between three quantum states exhibiting a mirror symmetry. The three states live in a two-dimensional Hilbert space, and are thus overcomplete. By mirror symmetry we understand that the transformation {|+> -> |+>, |-> -> -|->} leaves the set of states invariant. The obtained measurement strategy minimizes the error probability. An experimental realization for polarized photons, realizable with current technology, is suggested.Comment: 4 pages, 2 figure

Experimental Demonstration of Optimal Unambiguous State Discrimination

We present the first full demonstration of unambiguous state discrimination between non-orthogonal quantum states. Using a novel free space interferometer we have realised the optimum quantum measurement scheme for two non-orthogonal states of light, known as the Ivanovic-Dieks-Peres (IDP) measurement. We have for the first time gained access to all three possible outcomes of this measurement. All aspects of this generalised measurement scheme, including its superiority over a standard von Neumann measurement, have been demonstrated within 1.5% of the IDP predictions

Optimum detection for extracting maximum information from symmetric qubit sets

We demonstrate a class of optimum detection strategies for extracting the maximum information from sets of equiprobable real symmetric qubit states of a single photon. These optimum strategies have been predicted by Sasaki et al. [Phys. Rev. A{\bf 59}, 3325 (1999)]. The peculiar aspect is that the detections with at least three outputs suffice for optimum extraction of information regardless of the number of signal elements. The cases of ternary (or trine), quinary, and septenary polarization signals are studied where a standard von Neumann detection (a projection onto a binary orthogonal basis) fails to access the maximum information. Our experiments demonstrate that it is possible with present technologies to attain about 96% of the theoretical limit.Comment: 10 pages, 11 figures, to be submitted to Phys. Rev. A Converted to REVTeX4 format, and a few other minor modifications according to the comments from PRA referre

AlGaAs top solar cell for mechanical attachment in a multi-junction tandem concentrator solar cell stack

The AstroPower self-supporting, transparent AlGaAs top solar cell can be stacked upon any well-developed bottom solar cell for improved system performance. This is an approach to improve the performance and scale of space photovoltaic power systems. Mechanically stacked tandem solar cell concentrator systems based on the AlGaAs top concentrator solar cell can provide near term efficiencies of 36 percent (AMO, 100x). Possible tandem stack efficiencies greater than 38 percent (100x, AMO) are feasible with a careful selection of materials. In a three solar cell stack, system efficiencies exceed 41 percent (100x, AMO). These device results demonstrate a practical solution for a state-of-the-art top solar cell for attachment to an existing, well-developed solar cell

Accessible information and optimal strategies for real symmetrical quantum sources

We study the problem of optimizing the Shannon mutual information for sources of real quantum states i.e. sources for which there is a basis in which all the states have only real components. We consider in detail the sources ${\cal E}_M$ of $M$ equiprobable qubit states lying symmetrically around the great circle of real states on the Bloch sphere and give a variety of explicit optimal strategies. We also consider general real group-covariant sources for which the group acts irreducibly on the subset of all real states and prove the existence of a real group-covariant optimal strategy, extending a theorem of Davies (E. B. Davies, IEEE. Inf. Theory {\bf IT-24}, 596 (1978)). Finally we propose an optical scheme to implement our optimal strategies, enough simple to be realized with present technology.Comment: RevTeX, 16 pages, 4 eps figures with psfig, submitted to Phys. Rev. A, corrected output error of Fig. 1 in the previous versio

Critique on the Use of the Standardized Avian Acute Oral Toxicity Test for First Generation Anticoagulant Rodenticides

Avian risk assessments for rodenticides are often driven by the results of standardized acute oral toxicity tests without regards to a toxicant’s mode of action and time course of adverse effects. First generation anticoagulant rodenticides (FGARs) generally require multiple feedings over several days to achieve a threshold concentration in tissue and cause adverse effects. This exposure regimen is much different than that used in the standardized acute oral toxicity test methodology. Median lethal dose values derived from standardized acute oral toxicity tests underestimate the environmental hazard and risk of FGARs. Caution is warranted when FGAR toxicity, physiological effects, and pharmacokinetics derived from standardized acute oral toxicity testing are used for forensic confirmation of the cause of death in avian mortality incidents and when characterizing FGARs’ risks to free-ranging birds

Critique on the Use of the Standardized Avian Acute Oral Toxicity Test for First Generation Anticoagulant Rodenticides

Avian risk assessments for rodenticides are often driven by the results of standardized acute oral toxicity tests without regards to a toxicant’s mode of action and time course of adverse effects. First generation anticoagulant rodenticides (FGARs) generally require multiple feedings over several days to achieve a threshold concentration in tissue and cause adverse effects. This exposure regimen is much different than that used in the standardized acute oral toxicity test methodology. Median lethal dose values derived from standardized acute oral toxicity tests underestimate the environmental hazard and risk of FGARs. Caution is warranted when FGAR toxicity, physiological effects, and pharmacokinetics derived from standardized acute oral toxicity testing are used for forensic confirmation of the cause of death in avian mortality incidents and when characterizing FGARs’ risks to free-ranging birds