Ion thruster accelerator system Patent

Development and characteristics of ion thruster accelerator with single glass coated grid to provide increased ion extraction capability and larger diameter accelerator syste

Modeling and analysis of the TF30-P-3 compressor system with inlet pressure distortion

Circumferential inlet distortion testing of a TF30-P-3 afterburning turbofan engine was conducted at NASA-Lewis Research Center. Pratt and Whitney Aircraft analyzed the data using its multiple segment parallel compressor model and classical compressor theory. Distortion attenuation analysis resulted in a detailed flow field calculation with good agreement between multiple segment model predictions and the test data. Sensitivity of the engine stall line to circumferential inlet distortion was calculated on the basis of parallel compressor theory to be more severe than indicated by the data. However, the calculated stall site location was in agreement with high response instrumentation measurements

Texturing polymer surfaces by transfer casting

A technique for fabricating textured surfaces on polymers without altering their surface chemistries is described. A surface of a fluorocarbon polymer is exposed to a beam of ions to texture it. The polymer which is to be surface-roughened is then cast over the textured surface of the fluorocarbon polymer. After curing, the cast polymer is peeled off the textured fluorocarbon polymer, and the peeled off surface has negative replica of the textured surface. The microscopic surface texture provides large surface areas for adhesive bonding. In cardiovascular prosthesis applications the surfaces are relied on for the development of a thin adherent well nourished thrombus

Apparatus for producing oxidation protection coatings for polymers

A polymeric substrate is coated with a metal oxide film to provide oxidation protection in low Earth orbital environments. The film contains about 4 volume percent polymer to provide flexibility. A coil of polymer materials moves through an ion beam as it is fed between reels. The ion beam first cleans the polymer material surface and then sputters the film material from a target onto this surface

Nonsingular Black Hole Evaporation and ``Stable'' Remnants

We examine the evaporation of two--dimensional black holes, the classical space--times of which are extended geometries, like for example the two--dimensional section of the extremal Reissner--Nordstrom black hole. We find that the evaporation in two particular models proceeds to a stable end--point. This should represent the generic behavior of a certain class of two--dimensional dilaton--gravity models. There are two distinct regimes depending on whether the back--reaction is weak or strong in a certain sense. When the back--reaction is weak, evaporation proceeds via an adiabatic evolution, whereas for strong back--reaction, the decay proceeds in a somewhat surprising manner. Although information loss is inevitable in these models at the semi--classical level, it is rather benign, in that the information is stored in another asymptotic region.Comment: 23 pages, 6 figures, harvmac and epsf, RU-93-12, PUPT-1399, NSF-ITP-93-5

A Pyramid Scheme for Particle Physics

We introduce a new model, the Pyramid Scheme, of direct mediation of SUSY breaking, which is compatible with the idea of Cosmological SUSY Breaking (CSB). It uses the trinification scheme of grand unification and avoids problems with Landau poles in standard model gauge couplings. It also avoids problems, which have recently come to light, associated with rapid stellar cooling due to emission of the pseudo Nambu-Goldstone Boson (PNGB) of spontaneously broken hidden sector baryon number. With a certain pattern of R-symmetry breaking masses, a pattern more or less required by CSB, the Pyramid Scheme leads to a dark matter candidate that decays predominantly into leptons, with cross sections compatible with a variety of recent observations. The dark matter particle is not a thermal WIMP but a particle with new strong interactions, produced in the late decay of some other scalar, perhaps the superpartner of the QCD axion, with a reheat temperature in the TeV range. This is compatible with a variety of scenarios for baryogenesis, including some novel ones which exploit specific features of the Pyramid Scheme.Comment: JHEP Latex, 32 pages, 1 figur

Nonsingular Lagrangians for Two Dimensional Black Holes

We introduce a large class of modifications of the standard lagrangian for two dimensional dilaton gravity, whose general solutions are nonsingular black holes. A subclass of these lagrangians have extremal solutions which are nonsingular analogues of the extremal Reissner-Nordstrom spacetime. It is possible that quantum deformations of these extremal solutions are the endpoint of Hawking evaporation when the models are coupled to matter, and that the resulting evolution may be studied entirely within the framework of the semiclassical approximation. Numerical work to verify this conjecture is in progress. We point out however that the solutions with non-negative mass always contain Cauchy horizons, and may be sensitive to small perturbations.Comment: 27 pages, three figures, RU-92-61. (Replaced version contains some corrections to incorrect equations. The zero temperature extremal geometry (the conjectured end-point of the Hawking evaporation) is not as stated in the previous version, but rather is a nonsingular analogue of the zero temperature $M^2 = Q^2$ Reissner-Nordstrom space-time.

Deposition of diamondlike carbon films

A diamondlike carbon film is deposited in the surface of a substrate by exposing the surface to an argon ion beam containing a hydrocarbon. The current density in the ion beam is low during initial deposition of the film. Subsequent to this initial low current condition, the ion beam is increased to full power. At the same time, a second argon ion beam is directed toward the surface of the substrate. The second ion beam has an energy level much greater than that of the ion beam containing the hydrocarbon. This addition of energy to the system increases mobility of the condensing atoms and serves to remove lesser bound atoms

Surface texturing of fluoropolymers

A method is disclosed for improving surface texture for adhesive bonding, metal bonding, substrate plating, decal substrate preparation, and biomedical implant applications. The surface to be bonded is dusted in a controlled fashion to produce a disbursed layer of fine mesh particles which serve as masks. The surface texture is produced by impinging gas ions on the masked surface. The textured surface takes the form of pillars or cones. The bonding material, such as a liquid epoxy, flows between the pillars which results in a bond having increased strength. For bonding metals a thin film of metal is vapor or sputter deposited onto the textured surface. Electroplating or electroless plating is then used to increase the metal thickness in the desired amount