Performance of plain and slag-blended cements and mortars exposed to combined chloride-sulphate solution

The durability of reinforced concrete structures exposed to aggressive environments remains a challenge to both researchers and the construction industry. This study investigates the hydration, mechanical properties and durability characteristics of ground granulated blast-furnace slag (GGBS) - blended cements and mortars exposed to a combined sodium chloride - sulphate environment, at temperatures of 20°C and 38°C. The conditions were chosen so as to assess the performance of slag blends under typical temperate and warm tropical marine climatic conditions. Slags, having CaO/SiO2 ratios of 1.05 and 0.94, were blended with CEM I 52.5R at 30% replacement level to study the influence of slag composition and temperature. Parallel control tests were carried out with CEM I 42.5R. Pastes and mortar samples were cast using 0.5 water to binder ratio, pre-cured for 7 days in water before exposure. Flexural strengths were determined once the samples were 7, 28 or 90 days old. Hydration was followed using x-ray diffraction (XRD), thermal analysis, and calorimetry. Also, sorptivity, gas permeability and chloride diffusion tests were carried out on mortar samples to measure transport and durability characteristics. The results show improved mechanical and transport properties for slag blended cements exposed to environments rich in sodium chloride and sulphate

Exposure of mortars to cyclic chloride ingress and carbonation

The presence of chloride ions is one of the primary factors causing the degradation of reinforced concrete structures. An investigation to monitor ingress of chlorides during a 24-week wetting and drying exposure regime to simulate conditions in which multiple-mode transport mechanisms are active was conducted on a variety of binders. Penetration was evaluated using free and total chloride profiles. Acid extraction of chlorides is quantitatively reliable and practical for assessing penetration. X-ray diffraction was used to determine the presence of bound chlorides and carbonation. The ability of the cement blends to resist chloride penetration was, from best to worst, ground granulated blast-furnace slag, microsilica, pulverised-fuel ash, Portland cement. The effect of carbonation on binding capability was observed and the relative quantity of chlorides also showed a correlation with the amount of chlorides bound in the form of Friedel’s salt