1,299 research outputs found
Optimal utility and probability functions for agents with finite computational precision
When making economic choices, such as those between goods or gambles, humans act as if their internal representation of the value and probability of a prospect is distorted away from its true value. These distortions give rise to decisions which apparently fail to maximize reward, and preferences that reverse without reason. Why would humans have evolved to encode value and probability in a distorted fashion, in the face of selective pressure for reward-maximizing choices? Here, we show that under the simple assumption that humans make decisions with finite computational precision––in other words, that decisions are irreducibly corrupted by noise––the distortions of value and probability displayed by humans are approximately optimal in that they maximize reward and minimize uncertainty. In two empirical studies, we manipulate factors that change the reward-maximizing form of distortion, and find that in each case, humans adapt optimally to the manipulation. This work suggests an answer to the longstanding question of why humans make “irrational” economic choices
A new eclipsing binary system with a pulsating component detected by CoRoT
We report the discovery of CoRoT 102980178 (R.A.= 06:50:12.10, Dec.=
-02:41:21.8, J2000) an Algol-type eclipsing binary system with a pulsating
component (oEA). It was identified using a publicly available 55 day long
monochromatic lightcurve from the CoRoT initial run dataset (exoplanet field).
Eleven consecutive 1.26m deep total primary and the equal number of 0.25m deep
secondary eclipses (at phase 0.50) were observed. The following light elements
for the primary eclipse were derived: HJD_MinI= 2454139.0680 + 5.0548d x E. The
lightcurve modeling leads to a semidetached configuration with the photometric
mass ratio q=0.2 and orbital inclination i=85 deg. The out-of-eclipse
lightcurve shows ellipsoidal variability and positive O'Connell effect as well
as clear 0.01m pulsations with the dominating frequency of 2.75 c/d. The
pulsations disappear during the primary eclipses, which indicates the primary
(more massive) component to be the pulsating star. Careful frequency analysis
reveals the second independent pulsation frequency of 0.21 c/d and numerous
combinations of these frequencies with the binary orbital frequency and its
harmonics. On the basis of the CoRoT lightcurve and ground based multicolor
photometry, we favor classification of the pulsating component as a gamma
Doradus type variable, however, classification as an SPB star cannot be
excluded.Comment: 16 pages, 7 figures, 3 tables, accepted to Communications in
Asteroseismolog
Radial velocities and metallicities from infrared Ca II triplet spectroscopy of open clusters II. Berkeley 23, King 1, NGC 559, NGC 6603 and NGC 7245
Context: Open clusters are key to studying the formation and evolution of the
Galactic disc. However, there is a deficiency of radial velocity and chemical
abundance determinations for open clusters in the literature. Aims: We intend
to increase the number of determinations of radial velocities and metallicities
from spectroscopy for open clusters. Methods: We acquired medium-resolution
spectra (R~8000) in the infrared region Ca II triplet lines (~8500 AA) for
several stars in five open clusters with the long-slit IDS spectrograph on the
2.5~m Isaac Newton Telescope (Roque de los Muchachos Observatory, Spain).
Radial velocities were obtained by cross-correlation fitting techniques. The
relationships available in the literature between the strength of infrared Ca
II lines and metallicity were also used to derive the metallicity for each
cluster. Results: We obtain = 48.6+/-3.4, -58.4+/-6.8, 26.0+/-4.3 and
-65.3+/-3.2 km s-1 for Berkeley 23, NGC 559, NGC 6603 and NGC 7245,
respectively. We found [Fe/H] =-0.25+/-0.14 and -0.15+/-0.18 for NGC 559 and
NGC 7245, respectively. Berkeley 23 has a low metallicity, [Fe/H]
=-0.42+/-0.13, similar to other open clusters in the outskirts of the Galactic
disc. In contrast, we derived a high metallicity ([Fe/H] =+0.43+/-0.15) for NGC
6603, which places this system among the most metal rich known open clusters.
To our knowledge, this is the first determination of radial velocities and
metallicities from spectroscopy for these clusters, except NGC 6603, for which
radial velocities had been previously determined. We have also analysed ten
stars in the line of sight to King 1. Because of the large dispersion obtained
in both radial velocity and metallicity, we cannot be sure that we have sampled
true cluster members.Comment: 10 pages, 5 figures, accepted for publication in A&A (minor
modifications
Hunting for open clusters in \textit{Gaia} DR2: the Galactic anticentre
The Gaia Data Release 2 (DR2) provided an unprecedented volume of precise
astrometric and excellent photometric data. In terms of data mining the Gaia
catalogue, machine learning methods have shown to be a powerful tool, for
instance in the search for unknown stellar structures. Particularly, supervised
and unsupervised learning methods combined together significantly improves the
detection rate of open clusters. We systematically scan Gaia DR2 in a region
covering the Galactic anticentre and the Perseus arm and
, with the goal of finding any open clusters that may
exist in this region, and fine tuning a previously proposed methodology
successfully applied to TGAS data, adapting it to different density regions.
Our methodology uses an unsupervised, density-based, clustering algorithm,
DBSCAN, that identifies overdensities in the five-dimensional astrometric
parameter space that may correspond
to physical clusters. The overdensities are separated into physical clusters
(open clusters) or random statistical clusters using an artificial neural
network to recognise the isochrone pattern that open clusters show in a colour
magnitude diagram. The method is able to recover more than 75% of the open
clusters confirmed in the search area. Moreover, we detected 53 open clusters
unknown previous to Gaia DR2, which represents an increase of more than 22%
with respect to the already catalogued clusters in this region. We find that
the census of nearby open clusters is not complete. Different machine learning
methodologies for a blind search of open clusters are complementary to each
other; no single method is able to detect 100% of the existing groups. Our
methodology has shown to be a reliable tool for the automatic detection of open
clusters, designed to be applied to the full Gaia DR2 catalogue.Comment: 8 pages, accepted by Astronomy and Astrophysics (A&A) the 14th May,
2019. Tables 1 and 2 available at the CD
New membership determination and proper motions of NGC 1817. Parametric and non-parametric approach
We have calculated proper motions and re-evaluated the membership
probabilities of 810 stars in the area of two NGC objects, NGC 1817 and NGC
1807. We have obtained absolute proper motions from 25 plates in the reference
system of the Tycho-2 Catalogue. The plates have a maximum epoch difference of
81 years; and they were taken with the double astrograph at Zo-Se station of
Shanghai Observatory, which has an aperture of 40 cm and a plate scale of 30
arcsec/mm. The average proper motion precision is 1.55 mas/yr. These proper
motions are used to determine the membership probabilities of stars in the
region, based on there being only one very extended physical cluster: NGC 1817.
With that aim, we have applied and compared parametric and non-parametric
approaches to cluster/field segregation. We have obtained a list of 169
probable member stars.Comment: 11 pages, 8 figures, A&A in pres
A ring in a shell: the large-scale 6D structure of the Vela OB2 complex
The Vela OB2 association is a group of 10 Myr stars exhibiting a complex
spatial and kinematic substructure. The all-sky Gaia DR2 catalogue contains
proper motions, parallaxes (a proxy for distance) and photometry that allow us
to separate the various components of Vela OB2. We characterise the
distribution of the Vela OB2 stars on a large spatial scale, and study its
internal kinematics and dynamic history. We make use of Gaia DR2 astrometry and
published Gaia-ESO Survey data. We apply an unsupervised classification
algorithm to determine groups of stars with common proper motions and
parallaxes. We find that the association is made up of a number of small
groups, with a total current mass over 2330 Msun. The three-dimensional
distribution of these young stars trace the edge of the gas and dust structure
known as the IRAS Vela Shell across 180 pc and shows clear signs of expansion.
We propose a common history for Vela OB2 and the IRAS Vela Shell. The event
that caused the expansion of the shell happened before the Vela OB2 stars
formed, imprinted the expansion in the gas the stars formed from, and most
likely triggered star formation.Comment: Accepted by A&A (02 November 2018), 13 pages, 9+2 figure
Earthmoving construction automation with military applications: Past, present and future
© ISARC 2018 - 35th International Symposium on Automation and Robotics in Construction and International AEC/FM Hackathon: The Future of Building Things. All rights reserved. Amongst increasing innovations in frontier engineering sciences, the advancements in Robotic and Autonomous Systems (RAS) has brought about a new horizon in construction applications. There is evidence of the increasing interest in RAS technologies in the civil construction sector being reflected in construction efforts of many military forces. In particular, Army or ground-based forces are frequently called upon to conduct construction tasks as part of military operations, tasks which could be partially or fully aided by the employment of RAS technologies. Along with recent advances in the Internet of Things (IoT) and cyber-physical system infrastructure, it is essential to examine the current maturity, technical feasibility, and affordability, as well as the challenges and future directions of the adoption and application of RAS to military construction. This paper presents a comprehensive survey and provides a contemporary and industry-independent overview on the state-of-the-art of earthmoving construction automation used in defence, spanning current world’s best practice through to that which is predicted over the coming years
Low-energy structures embedded with smart dampers
© 2018 Elsevier B.V. Building structures, subject to dynamic loadings or external disturbances, may undergo destructive vibrations and encounter different degrees of deformation. Modeling and control techniques can be applied to effectively damp out these vibrations and maintain structural health with a low energy cost. Smart structures embedded with semi-active control devices, offer a promising solution to the problem. The smart damping concept has been proven to be an effective approach for input energy shaping and suppressing unwanted vibrations in structural control for buildings embedded with magnetorheological fluid dampers (MRDs). In this paper, the dissipation energy in MRD is studied by using results from induced hysteretic effect of structural vibrations while the fluid is placed under a controlled magnetic field. Then, a frequency-shaped second-order sliding mode controller (FS2SMC) is designed along with a low-pass filter to implement the desired dynamic sliding surface, wherein the frequency responses of the hysteretic MRD is represented by its magnitude and phase describing functions. The proposed controller can thus shape the frequency characteristics of the equivalent dynamics for the MRD-embedded structure against induced vibrations, and hence, dissipate the energy flow within the smart devices to prevent structural damage. Simulation results for a 10-floor building model equipped with current-controlled MRDs, subject to horizontal seismic excitations validate the proposed technique for low-energy structures with smart devices. The closed-loop performance and comparison in terms of energy signals indicate that the proposed method allows not only to reduce induced vibrations and input energy, but also its spectrum can be adjusted to prevent natural modes of the structure under external excitations
Presentación
[ES] Presentación del Vol. 18, núm. 3 de RIAIBalaguer, C. (2021). Presentación. Revista Iberoamericana de Automática e Informática industrial. 18(3). http://hdl.handle.net/10251/168899OJSi18
Spatial density, average prices and price dispersion. Evidence from the Spanish hotel industry
Based on the assumption that location is especially relevant in the lodging industry, we exploit a dataset of Spanish hotels to examine the relationship between spatial competition and retail price level and dispersion. Our results support the hypothesis that a greater density of competitors implies both a lower level and less dispersion of retail prices. We find that close competitors, in terms of hotel category and distance, have a stronger effect on price setting behavior. Moreover, we report weak evidence that the relationship between spatial competition and price level depends on whether the day considered belongs to the midweek or the weekend. Therefore, variation in the type of consumers seems to play quite an important role in explaining the relationship. Partiendo del supuesto de que la localización es especialmente relevante para el sector del alojamiento, utilizamos una base de datos de hoteles españoles para examinar la relación entre competencia espacial y el nivel y la dispersión de los precios de las habitaciones. Nuestros resultados confirman la hipótesis de que una mayor densidad de competidores implica niveles de precios menores y menor dispersión de precios. Los competidores cercanos, ya lo sean en términos de categoría hotelera como de distancia, tienen una mayor influencia sobre la fijación de precios. Adicionalmente, encontramos evidencia débil acerca de que la relación entre competencia espacial y el nivel de precios depende de si el día considerado es laborable o corresponde al fin de semana. Por tanto, las variaciones en el tipo de consumidores parecen tener un papel importante en la explicación de esta relación.Nivel de precios, dispersión de precios, competencia espacial, sector hotelero. Price level, price dispersion, spatial competition, hotel industry
- …