Observation of surface charge screening and Fermi level pinning on a synthetic, boron-doped diamond

Spectroscopic current-voltage (I-V) curves taken with a scanning tunneling microscope on a synthetic, boron-doped diamond single crystal indicate that the diamond, boiled in acid and baked to 500 °C in vacuum, does not exhibit ideal Schottky characteristics. These I-V curves taken in ultrahigh vacuum do not fit the traditional theory of thermionic emission; however, the deviation from ideal can be accounted for by charge screening at the diamond surface. At ambient pressure, the I-V curves have a sharp threshold voltage at 1.7 eV above the valence band edge indicating pinning of the Fermi energy. This measurement is in excellent agreement with the 1/3 band gap rule of Mead and Spitzer [Phys. Rev. 134, A713 (1964)]

The two-phase approximation for black hole collisions: Is it robust?

Recently Abrahams and Cook devised a method of estimating the total radiated energy resulting from collisions of distant black holes by applying Newtonian evolution to the holes up to the point where a common apparent horizon forms around the two black holes and subsequently applying Schwarzschild perturbation techniques . Despite the crudeness of their method, their results for the case of head-on collisions were surprisingly accurate. Here we take advantage of the simple radiated energy formula devised in the close-slow approximation for black hole collisions to test how strongly the Abrahams-Cook result depends on the choice of moment when the method of evolution switches over from Newtonian to general relativistic evolution. We find that their result is robust, not depending strongly on this choice.Comment: 4 pages, 3 figures, submitted to Classical and Quantum Gravit

Gravitational waves from black hole collisions via an eclectic approach

We present the first results in a new program intended to make the best use of all available technologies to provide an effective understanding of waves from inspiralling black hole binaries in time for imminent observations. In particular, we address the problem of combining the close-limit approximation describing ringing black holes and full numerical relativity, required for essentially nonlinear interactions. We demonstrate the effectiveness of our approach using general methods for a model problem, the head-on collision of black holes. Our method allows a more direct physical understanding of these collisions indicating clearly when non-linear methods are important. The success of this method supports our expectation that this unified approach will be able to provide astrophysically relevant results for black hole binaries in time to assist gravitational wave observations.Comment: 4 pages, 3 eps figures, Revte

Observing mergers of non-spinning black-hole binaries

Advances in the field of numerical relativity now make it possible to calculate the final, most powerful merger phase of binary black-hole coalescence for generic binaries. The state of the art has advanced well beyond the equal-mass case into the unequal-mass and spinning regions of parameter space. We present a study of the nonspinning portion of parameter space, primarily using an analytic waveform model tuned to available numerical data, with an emphasis on observational implications. We investigate the impact of varied mass ratio on merger signal-to-noise ratios (SNRs) for several detectors, and compare our results with expectations from the test-mass limit. We note a striking similarity of the waveform phasing of the merger waveform across the available mass ratios. Motivated by this, we calculate the match between our 1:1 (equal mass) and 4:1 mass-ratio waveforms during the merger as a function of location on the source sky, using a new formalism for the match that accounts for higher harmonics. This is an indicator of the amount of degeneracy in mass ratio for mergers of moderate-mass-ratio systems.Comment: 13 pages, 11 figures, submitted to Phys. Rev.

A Compton telescope for remote location and identification of radioactive material

The spare detectors from NASA Compton Gamma-Ray Observatory COMPTEL instrument have been reconfigured to demonstrate the capability at ground level to remotely locate and identify sources of g radiation or the movement of material that might shield γ-ray sources. The Gamma-Ray Experimental Telescope Assembly (GRETA) employs two 28 cm diameter scintillation detectors separated by 81 cm: one 8.5 cm thick liquid scintillator detector and one 7.5 cm thick NaI(Tl) detector. The assembly electronics and real-time data acquisition system measures the energy deposits and time-of- flight for each coincident detection and compiles histograms of total energy and incident angle as computed using the kinematics of Compton scattering. The GRETA field of view is a cone with full angle approximately 120°. The sensitive energy range is 0.3 to 2.6 MeV. Energy resolution is ~10% FWHM. The angular resolution, ~19° in the simplified configuration tested, will improve to better than 5° with well-defined enhancements to the data acquisition hardware and data analysis routines. When operated in the mode that was used in space, the instrument is capable of measuring and imaging up to 30 MeV with an angular resolution of 1.5°. The response of the instrument was mapped in the laboratory with 14 Ci 22Na source 3 m from the instrument. Later, we conducted demonstrations under two measurement scenarios. In one, the remotely located instrument observed an increase of background radiation counts at 1.4 MeV when a large amount of lead was removed from a building and a corresponding decrease when the lead was replaced. In the other scenario, the location and isotope-identifying energy spectrum of a 500 μCi137Cs source 3-5 m from the instrument with two intervening walls was determined in less than one minute. We report details of the instrument design and these measurements

Making use of geometrical invariants in black hole collisions

We consider curvature invariants in the context of black hole collision simulations. In particular, we propose a simple and elegant combination of the Weyl invariants I and J, the {\sl speciality index} ${\cal S}$. In the context of black hole perturbations $\cal S$ provides a measure of the size of the distortions from an ideal Kerr black hole spacetime. Explicit calculations in well-known examples of axisymmetric black hole collisions demonstrate that this quantity may serve as a useful tool for predicting in which cases perturbative dynamics provide an accurate estimate of the radiation waveform and energy. This makes ${\cal S}$ particularly suited to studying the transition from nonlinear to linear dynamics and for invariant interpretation of numerical results.Comment: 4 pages, 3 eps figures, Revte