154 research outputs found

    Improvement of FAO-56 Model to Estimate Transpiration Fluxes of Drought Tolerant Crops under Soil Water Deficit: Application for Olive Groves

    Get PDF
    Agro-hydrological models are considered an economic and simple tool for quantifying crop water requirements. In the last two decades, agro-hydrological physically based models have been developed to simulate mass and energy exchange processes in the soil-plant-atmosphere system. Although very reliable, because of the high number of required variables, simplified models have been proposed to quantify crop water consumes. The main aim of this paper is to propose an amendment of the Food and Agricultural Organization (FAO) of the United Nations FAO-56 spreadsheet program to introduce a more realistic shape of the stress function, valid for mature olive orchards (Olea europaea L.). The modified model is successively validated by means of the comparison between measured and simulated soil water contents and actual transpiration fluxes. These outputs are finally compared with those obtained with the original version of the model. Experiments also allowed assessing the ability of simulated crop water stress coefficients to explain the actual water stress conditions evaluated on the basis of measured relative transpirations and midday stem water potentials. The results show that the modified model significantly improves the estimation of actual crop transpiration fluxes and soil water contents under soil water deficit conditions, according to the RMSEs associated with the revised model, resulting in significantly higher than the corresponding values obtained with the original version

    Saturation excess runoff numerical simulation

    Get PDF
    Saturation excess runoff is a relevant process which needs additional experimental and modeling efforts. This work is focused on its numerical modeling. The final objective is the successive interpretation of ongoing experimental monitoring results in two watersheds in different areas of Italy where the saturation excess runoff formation mechanism seems to be important. The numerical solution of the two-dimensional Richards\u2019 equation allows the evaluation of the sensitivity to the various influent parameters : rainfall intensity, soil properties, depth and initial water content, slope and hillslope length. Also the subsurface flow is simulated at the same time, allowing the evaluation of the different characteristic times and dominances of the two processes, namely subsurface and surface runoff. Only steady runoff intensities are considered for the sake of simplifying the results interpretation, but unsteady ones can be easily implemented. The same holds for soil layering

    Influence of biochar on the physical, chemical and retention properties of an amended sandy soil

    Get PDF
    Soil porosity plays an important role in soil-water retention and water availability to crops, potentially affecting both agricultural practices and environmental sustainability. The pore structure controls fluid flow and transport through the soil, as well as the relationship between the properties of individual minerals and plants. Moreover, the anthropogenic pressure on soil properties has produced numerous sites with extensive desertification process close to residential areas. Biochar (biologically derived charcoal) is produced by pyrolysis of biomasses under low oxygen conditions, and it can be applied for recycling organic waste in soils and increase soil fertility, improving soil structure and enhancing soil water storage and soil water movement. Soil application of biochar might have agricultural, environmental and sustainability advantages over the use of organic manures or compost, as it is a porous material with a high inner surface area. The main objectives of the present study were to investigate the possible application of biochar from forest residues, derived from mechanically chipped trunks and large branches of Abies alba M., Larix decidua Mill., Picea excelsa L., Pinus nigra A. and Pinus sylvestris L. pyrolysed at 450 C for 48h, to improve soil structural and hydraulic properties (achieving a stabilization of soil). Different amount of biochar were added to a desertic sandy soil, and the effect on soil porosity water retention and water available to crops were investigated. The High Energy Moisture Characteristic (HEMC) technique was applied to investigate soil-water retention at high-pressure head levels. The adsorption and desorption isotherms of N2 on external surfaces were also determined in order to investigate micro and macro porosity ratio. Both the described model of studies on adsorption-desorption experiments with the applied isotherms model explain the increasing substrate porosity with a particular attention to the macro and micro porosity, respectively

    Ambienti umidi effimeri e naturalitĂ  del paesaggio in Sicilia

    Get PDF
    This paper analyzes the relationship between vegetal communities conservation state and surrounding landscape naturalness. Expert-based assessment, based on phytosociological releves, has been used to define the qualitative condition of vegetal coenoses. Landscape naturalness has been assessed using Naturalness Evaluation Index (NEI). Analysis showed strong correlation between landscape naturalness and assemblages conservation state. Ephemeral wetlands survival is tied to proper conservation of surrounding territory

    Efficiency Optimization in Medium Power Wind Turbines: an Innovative Mechanical Pitch Control System

    Get PDF
    The paper illustrates the design of a new mechanical system for propeller blades pitch calibration in medium power wind turbines. The peculiarity of this system is its capacity of adjusting through a feedback control system, which allows the wind turbine to capture the maximum amount of energy from the wind. In this work an axial drive system was studied by means of racks capable of linearly adjusting the pitch of all wind turbine propeller blades in an intrinsically synchronous way, with an advantage over the traditional methods of propeller blades pitch calibration. For different wind speeds the system adjusts the blades angle of incidence in order to reduce the rotation speed and keep the system as close as possible to the pre-established design conditions generating maximum energy with a high efficiency. The manuscript examines the main analyses and simulations conducted during the design phase. These show that the proposed method allows to reach higher efficiencies with a greater intrinsic stability compared to the traditional pitch control mechanisms in medium power wind turbines. The experimental results on the first prototypes confirm the efficiency increase

    Analytical Approach Determining the Optimal Length of Paired Drip Laterals in Uniformly Sloped Fields

    Get PDF
    Microirrigation plants, if properly designed, allow for water use efficiency to be optimized and high values of emission uniformity to be obtained in the field. Disposing paired laterals, for which two distribution pipes extend in opposite directions from a common manifold, can contribute to reducing the initial investment cost that represents a limiting factor for small-scale farmers of developing countries where in the last decade, the diffusion of such irrigation systems has been increasing. The objective of this paper is to propose an analytical approach to evaluate the maximum lengths of paired drip laterals for any uniform ground slope, respecting the criteria to maintain emitter flow rates or the corresponding pressure heads within fixed ranges in order to achieve a relatively high field emission uniformity coefficient. The method is developed by considering the motion equations along uphill and downhill sides of the lateral and the hypothesis to neglect the variations of emitters’ flow rate along the lateral as well as the local losses due to emitters’ insertions. If for the uphill pipe, the minimum and the maximum pressure heads occur at the upstream end and at the manifold connection, respectively, on the downhill side, the minimum pressure head is located in a certain section of the lateral, depending on the geometric and hydraulic characteristics of the lateral, as well as on the slope of the field; a second relative maximum pressure head could also exist at the downstream end of the pipe. The proposed methodology allows in particular the number of emitters in uphill and downhill sides of the lateral to be determined separately, and therefore, once fixing emitter’s spacing, the length of the uphill and downhill laterals and the position of the manifold. Applications and validation of the proposed approach, considering different design parameters, are finally presented and discussed

    Modelling the Frequency of Interarrival Times and Rainfall Depths with the Poisson Hurwitz-Lerch Zeta Distribution

    Get PDF
    The Poisson-stopped sum of the Hurwitz-Lerch zeta distribution is proposed as a model for interarrival times and rainfall depths. Theoretical properties and characterizations are investigated in comparison with other two models implemented to perform the same task: the Hurwitz-Lerch zeta distribution and the one inflated Hurwitz-Lerch zeta distribution. Within this framework, the capability of these three distributions to fit the main statistical features of rainfall time series was tested on a dataset never previously considered in the literature and chosen in order to represent very different climates from the rainfall characteristics point of view. The results address the Hurwitz-Lerch zeta distribution as a natural framework in rainfall modelling using the additional random convolution induced by the Poisson-stopped model as a further refinement. Indeed the Poisson contribution allows more flexibility and depiction in reproducing statistical features, even in the presence of very different climates

    A distributed analysis of vibration signals for leakage detection in Water Distribution Networks

    Get PDF
    It is well known that Water Distribution Networks (WDNs) are very inefficient and, in Italy, 40% of water is lost during distribution. In this paper, we present a solution for detecting leakages in WDNs, based on three main components: i) an innovative sensing element to be deployed at the sensor nodes, which analyses vibrations in the acoustic range for classifying external noise sources, induced by water leakages, by means of suitable machine learning techniques; ii) an Internet of Things (IoT) system of sensors, deployed at the junctions of the WDNs, for comparing the measurements collected at different critical points of the network; iii) a machine learning algorithm for processing the data. After the definition of the WDN structure, we introduce some numerical simulation tools suitable for studying our system and modeling the proposed sensing solution. Given the geometry, physical properties (pipe lengths, diameters, roughness, reservoir shapes and levels, pump and valve characteristic curves) and nodal demands, the simulation tool is able to compute leakages in pipes or nodes over time. In parallel, we simulate our IoT system coupled to the WDN, by logging partial information about the WDN status, which corresponds to the demand readings at the edge nodes or at some junction nodes, together with the (optional) measurements of the deployed sensing elements. On the basis of this data, we analyze the possibility of identifying the leakages in the network, even without knowing the exact or complete topology of the WDN. Our solution exploits different machine learning techniques devised to indirectly retrieve topological information, by correlating the balance of the flows as the water demand varies over time

    Functional characterization of the sea urchin sns chromatin insulator in erythroid cells

    Get PDF
    Chromatin insulators are regulatory elements that determine domains of genetic functions. We have previously described the characterization of a 265 bp insulator element, termed sns, localized at the 3' end of the early historic H2A gene of the sea urchin Paracentrotus lividus. This sequence contains three cis-acting elements (Box A, Box B, and Box C+T) all needed for the enhancer-blocking activity in both sea urchin and human cells. The goal of this Study was to further characterize the sea urchin sns insulator in the erythroid environment. We employed colony assays in human (K562) and mouse (MEL) erythroid cell lines. We tested the capability of sns to interfere with the communication between the 5HS2 enhancer of the human beta-globin LCR and the gamma-globin promoter. We found that the sns sequence displays directional enhancer-blocking activity. By the use of antibodies against known DNA binding proteins, in electrophoretic mobility shift assays, we demonstrated the binding of the erythroid-specific GATA-1 and the ubiquitous Oct-1 and Sp1 transcription factors. These factors bind to Box A, Box B, and Box C+T, respectively, in both K562 and MEL nuclear extracts. These results may have significant implications for the conservation of insulator function ill evolutionary distant organisms and may prove to be of practical benefit in gene transfer applications for erythroid disorders such as hemoglobinopathies and thalassemias
    • …
    corecore