Nanotopography mediated osteogenic differentiation of human dental pulp derived stem cells

Advanced medical devices, treatments and therapies demand an understanding of the role of interfacial properties on the cellular response. This is particularly important in the emerging fields of cell therapies and tissue regeneration. In this study, we evaluate the role of surface nanotopography on the fate of human dental pulp derived stem cells (hDPSC). These stem cells have attracted interest because of their capacity to differentiate to a range of useful lineages but are relatively easy to isolate. We generated and utilized density gradients of gold nanoparticles which allowed us to examine, on a single substrate, the influence of nanofeature density and size on stem cell behavior. We found that hDPSC adhered in greater numbers and proliferated faster on the sections of the gradients with higher density of nanotopography features. Furthermore, greater surface nanotopography density directed the differentiation of hDPSC to osteogenic lineages. This study demonstrates that carefully tuned surface nanotopography can be used to manipulate and guide the proliferation and differentiation of these cells. The outcomes of this study can be important in the rational design of culture substrates and vehicles for cell therapies, tissue engineering constructs and the next generation of biomedical devices where control over the growth of different tissues is required

Fabrication of silicon nanowire arrays by near-field laser ablation and metal-assisted chemical etching

We present an elegant route for the fabrication of ordered arrays of vertically-aligned silicon nanowires with tunable geometry at controlled locations on a silicon wafer. A monolayer of transparent microspheres convectively assembled onto a gold-coated silicon wafer acts as a microlens array. Irradiation with a single nanosecond laser pulse removes the gold beneath each focusing microsphere, leaving behind a hexagonal pattern of holes in the gold layer. Owing to the near-field effects, the diameter of the holes can be at least five times smaller than the laser wavelength. The patterned gold layer is used as catalyst in a metal-assisted chemical etching to produce an array of vertically-aligned silicon nanowires. This approach combines the advantages of direct laser writing with the benefits of parallel laser processing, yielding nanowire arrays with controlled geometry at predefined locations on the silicon surface. The fabricated VA-SiNW arrays can effectively transfect human cells with a plasmid encoding for green fluorescent protein

Surface engineering for long-term culturing of mesenchymal stem cell microarrays

The cell microarray format can recreate a multitude of cell microenvironments on a single chip using only minimal amounts of reagent. In this study, we describe surface modifications to passivate cell microarrays, aiming to adapt the platform to the study of stem cell behavior over long-term culture periods. Functionalization of glass slides with (3-glycidyloxypropyl) trimethoxysilane enabled covalent anchoring of extracellular matrix proteins on microscale spots printed by a robotic contact printer. Subsequently, the surface was passivated by bovine serum albumin (BSA) or poly(ethylene glycol)bisamine (A-PEG) with molecular weights of 3000, 6000, and 10 000 Da. Cloud-point conditions for A-PEG grafting were attained that were compatible with protein deposition. Passivation strategies were assessed by culturing mesenchymal stem cells on the microarray platform. While both BSA and A-PEG passivation initially blocked cell adhesion between the printed spots, only A-PEG grafting was able to maintain cell pattern integrity over the entire culture period of 3 weeks.

Exploring the mesenchymal stem cell niche using high throughput screening

In the field of stem cell technology, future advancements rely on the effective isolation, scale-up and maintenance of specific stem cell populations and robust procedures for their directed differentiation. The stem cell microenvironment – or niche – encompasses signal inputs from stem cells, supporting cells and from the extracellular matrix. In this context, the contribution of physicochemical surface variables is being increasingly recognised. This paradigm can be exploited to exert control over cellular behaviour. However, the number of parameters at play, and their complex interactions, presents a formidable challenge in delineating how the decisions of cell fate are orchestrated within the niche. Additionally, in the case of mesenchymal stem cells (MSC), more than one type of stem cell niche has been identified. By employing high throughput screening (HTS) strategies, common and specific attributes of each MSC niche can be probed. Here, we explore biological, chemical and physical parameters that are known to influence MSC self-renewal and differentiation. We then review techniques and strategies that allow the HTS of surface properties for conditions that direct stem cell fate, using MSC as a case study. Finally, challenges in recapturing the niche, particularly its three dimensional nature, in surface-based HTS formats are discussed.

Rapid fabrication of functionalised poly(dimethylsiloxane) microwells for cell aggregate formation

Cell aggregates reproduce many features of the natural architecture of functional tissues, and have therefore become an important in vitro model of tissue function. In this study, we present an efficient and rapid method for the fabrication of site specific functionalised poly(dimethylsiloxane) (PDMS) microwell arrays that promote the formation of insulin-producing beta cell (MIN6) aggregates. Microwells were prepared using an ice templating technique whereby aqueous droplets were frozen on a surface and PDMS was cast on top to form a replica. By employing an aqueous alkali hydroxide solution, we demonstrate exclusive etching and functionalisation of the microwell inner surface, thereby allowing the selective absorption of biological factors within the microwells. Additionally, by manipulating surface wettability of the substrate through plasma polymer coating, the shape and profile of the microwells could be tailored. Microwells coated with antifouling Pluronic 123, bovine serum albumin, collagen type IV or insulin growth factor 2 were employed to investigate the formation and stability of MIN6 aggregates in microwells of different shapes. MIN6 aggregates formed with this technique retained insulin expression. These results demonstrate the potential of this platform for the rapid screening of biological factors influencing the formation and response of insulin-producing cell aggregates without the need for expensive micromachining techniques

Evaluation of Morpholino Antisense Oligos’ Role on BCR-ABL Gene Silencing in the K562 Cell Line

Objective: Chronic myeloid leukemia (CML) develops when a hematopoietic stem cellacquires the BCR/ABL fusion gene. This causes these transformed hematopoietic cellsto have a greater than normal proliferation rate. Scientists attempt to improve the CMLtreatment process by silencing the BCR/ABL oncogene. In this work, we used morpholinoantisense oligos to silence the BCR/ABL oncogene.Materials and Methods: In this study, the K562 was used as a BCR/ABL fusion-genepositive cell line and the Jurkat cell line as a control. We explored the inhibiting capacityof morpholino antisense oligos in the the expression of the BCR/ABL oncogene andstudied their p210 BCR/ABL suppression, inhibition of cell proliferation and stimulation ofapoptosis in the K562 cells after 24 and 48 hours. Endo-Porter was used for delivery ofmorpholino antisense oligos into cell cytosols. Meanwhile, flow cytometric analysis wasperformed in order to determine the appropriate concentration of morpholino antisenseoligos.Results: Prolonged exposure of the K562 cell line to the morpholino antisense oligostargeted against the BCR-ABL gene showed proliferation inhibition as its main feature.After western blotting, we found that complete silencing of BCR/ABL was achieved, butflow cytometric analysis showed no broad apoptosis.Conclusion: The results indicate that the Morpholino antisense oligo is able to inhibitp210 BCR/ABL; however, it cannot induce broad apoptosis due to co-silencing of BCR

Identification and In Vitro Expansion of Buccal Epithelial Cells

This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.Ex vivo-expanded buccal mucosal epithelial (BME) cell transplantation has been used to reconstruct the ocular surface. Methods for enrichment and maintenance of BME progenitor cells in ex vivo cultures may improve the outcome of BME cell transplantation. However, the parameter of cell seeding density in this context has largely been neglected. This study investigates how varying cell seeding density influences BME cell proliferation and differentiation on tissue culture polystyrene (TCPS). The highest cell proliferation activity was seen when cells were seeded at 5×104 cells/cm2. Both below and above this density, the cell proliferation rate decreased sharply. Differential immunofluorescence analysis of surface markers associated with the BME progenitor cell population (p63, CK19, and ABCG2), the differentiated cell marker CK10 and connexin 50 (Cx50) revealed that the initial cell seeding density also significantly affected the progenitor cell marker expression profile. Hence, this study demonstrates that seeding density has a profound effect on the proliferation and differentiation of BME stem cells in vitro, and this is relevant to downstream cell therapy applications.The authors disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by ‘NHMRC Australia Project grant’, grant agreement No. 595901

Patterning and Biofunctionalization of Antifouling Hyperbranched Polyglycerol Coatings

We demonstrate the patterned biofunctionalization of antifouling hyperbranched polyglycerol (HPG) coatings on silicon and glass substrates. The ultralow fouling HPG coatings afforded straightforward chemical handles for rapid bioconjugation of amine containing biomolecular species. This was achieved by sodium periodate oxidation of terminal HPG diols to yield reactive aldehyde groups. Patterned microprinting of sodium periodate and cell adhesion mediating cyclic peptides containing the RGD sequence resulted in an array of covalently immobilized bioactive signals. When incubated with mouse fibroblasts, the HPG background resisted cell attachment whereas high density cell attachment was observed on the peptide spots, resulting in high-contrast cell microarrays. We also demonstrated single-step, in situ functionalization of the HPG coatings by printing periodate and peptide concurrently. Our results demonstrate the effectiveness of antifouling and functionalized HPG graft polymer coatings and establish their use in microarray applications for the first time

Gold-Decorated Porous Silicon Nanopillars for Targeted Hyperthermal Treatment of Bacterial Infections

In order to address the issue of pathogenic bacterial colonization of diabetic wounds, a more direct and robust approach is required, which relies on a physical form of bacterial destruction in addition to the conventional biochemical approach (i.e., antibiotics). Targeted bacterial destruction through the use of photothermally active nanomaterials has recently come into the spotlight as a viable approach to solving the rising problem of antibiotic resistant microorganisms. Materials with high absorption coefficients in the near-infrared (NIR) region of the electromagnetic spectrum show promise as alternative antibacterial therapeutic agents, since they preclude the development of bacterial resistance and can be activated on demand. Here were report on a novel approach for the fabrication of gold nanoparticle decorated porous silicon nanopillars with tunable geometry that demonstrate excellent photothermal conversion properties when irradiated with a 808 nm laser. These photothermal antibacterial properties are demonstrated <i>in vitro</i> against the Gram-positive bacteria <i>Staphylococcus aureus</i> (<i>S. aureus</i>) and Gram-negative <i>Escherichia coli</i> (<i>E. coli</i>). Results show a reduction in bacterial viability of up to 99% after 10 min of laser irradiation. We also show an increase in antibacterial performance after modifying the nanopillars with <i>S. aureus</i> targeting antibodies causing up to a 10-fold increase in bactericidal efficiency compared to <i>E. coli</i>. In contrast, the nanomaterial resulted in minimal disruption of metabolic processes in human foreskin fibroblasts (HFF) after an equivalent period of irradiation