Population dynamics of soil microbes and diversity of Bacillus thuringiensis in agricultural and botanic garden soils of India

Different microbial guilds of three rice fields (aerobic (dry or wet) laterite and red sandy, and anaerobic (flooded), clay-loam), a botanical garden (wet, aerobic, humus) and a sorghum (dry, aerobic, sandy) soil were investigated. Population (x106 cfu/g dr. soil) of the aerobic (3.8 - 26.2) and anaerobic (0.91 - 13.6) heterotrophic, aerobic (1.1 - 3.7) and anaerobic (0.8 - 1.3) spore forming, Gram (-)ve (0.3 - 0.7), phosphate solubilizing (0.01 - 0.06), asymbiotic N2-fixing (0.26 - 0.88), sulfur oxidizing (0.13 - 0.75), sulfate reducing (0.01 - 0.1), nitrifying (0.1 - 0.23) and denitrifying (0.04 - 0.25) bacteria; actinomycetes (0.01x104 cfu/g dr. soil), fungi (0.01 - 0.05x105 cfu/g dr. soils) and Bacillus thuringiensis (Bt) (0.13- 0.25x106 cfu/g dr. soil) population were variable in different soils. Nevertheless, proportions of Bt in relation to spore forming bacteria were comparable (index (5-9) x10-4) and they produced either monotypic (bipyramidal or spherical) or heterotypic (polymorphic-bipyramidal or bipyramidalrhomboidal) crystals although the bipyramidal crystal producing Bt were predominant in the soils. The bipyramidal crystal producing Bt were diverse in different ecologies, resistant to penicillin group of antibiotics and tolerated 5 - 6% NaCl. Phenotypic characters allowed to group the Bt isolates of botanic garden as B. thuringiensis subsp. coreanensis and as B. thuringiensis subsp. thompsoni/coreanensis, sorghum fields as B. thuringiensis subsp. finitimus and but those of rice fields as B. thuringiensis subsp. thuringiensis/ shandongiensis, finitimus and thompsoni/coreanensis. The isolates produced 25.78, 25.78, 86.26, 24.73, 68.0, 26.8 and 26.8 kDa proteins and equivalent to Cyt, Cry5 and Cry2 toxins effective against the insects of Diptera and Lepidoptera/Coleoptera

On the warm pool dynamics in the southeastern Arabian Sea during April - May 2005 based on the satellite remote sensing and ARGO float data

Observational data from the Arabian Sea Monsoon Experiment (ARMEX-Phase IIA) in the southeastern Arabian Sea (SEAS) showed intense warming with the SST up to 31.5°C during April-May 2005. Analysis of 5-day repeat cycles of temperature and salinity profiles from an ARGO float (ID No. 2900345) in a 3°x1° box closer to ARMEX-II buoy (8.3°N, 72.68°E) in the SEAS during January-September 2005 revealed evolution of warm pool (SST>28°C) in spring 2005. The Argo data derived D20 (depth of 20°C isotherm) showed the influence of remote forcing during January-May, and local wind forcing during southwest monsoon. Low salinity waters (<34.0) occupied the top 30 m during January-February followed by temperature inversions (up to 0.5°C) in the 30-60 m depth range. From the peak spring warming, the SST dropped gradually by 3.5°C by end-July with the advent of southwest monsoon followed by a decrease in net heat gain upto 100 W/m^2. The merged weekly products of sea surface height anomalies and the NLOM simulated surface currents showed complex surface circulation consisting of seasonal Lakshadweep High/Low in winter/summer. The examined oceanic and atmospheric variables showed an intraseasonal variability with 41 to 63 day period, coinciding with the Madden-Julian Oscillatio

Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application

[EN] Copper-indium gallium disulfide (CIGS) is a good absorber for photovoltaic application. Thin films of CIGS were prepared by spray pyrolysis on glass substrates in the ambient atmosphere. The films were characterized by different techniques, such as structural, morphological, optical and electrical properties of CIGS films were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), spectrophotometer and Hall effect, respectively. After optimization, the deposited films structure, grain size, and crystallinity became more important with an increase of annealing time at 370 degrees C for 20 min. Transmission electron microscopy (TEM) analysis shows that the interface sheets are well crystallized and the inter planer distance are 0.25 nm, 0.28 nm, and 0.36 nm. The atomic force microscopy (AFM) observation shows that the grain size and roughness can be tolerated by optimizing the annealing time. The strong absorbance and low transmittance were observed for the prepared films with a suitable energy bandgap about 1.46 eV. The Hall effect measurement system examined that CIGS films exhibited optimal electrical properties, resistivity, carrier mobility, and carrier concentration which were determined to be 4.22 x 10(6) omega cm, 6.18 x 10(2) cm(2) V-1 S-1 and 4.22 x 10(6) cm(-3), respectively. The optoelectronic properties of CIGS material recommended being used for the photovoltaic application.Prof. Bouchaib HARTITI, The Senior Associate at ICTP, is very grateful to ICTP for permanent support. Prof. Mohamed Ebn Touhami, Director of the University Center for Analysis, Expertise, Transfer of Technology and Incubation, Kenitra, Morocco, is very grateful to CUA2TI for financial support. Thanks to Doctor Diogo M.F. Santos for the supervision of Amal Bouich's work during her research in CeFEMA research center. The authors also thank researchers from CeFEMA (IST-ULisboa, Portugal) and CUA2TI (FS-Kenitra Morocco) for their help.Bouich, A.; Hartiti, B.; Ullah, S.; Ullah, H.; Ebn Touhami, M.; Santos, DMF.; Marí, B. (2019). Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application. Applied Physics A. 125(8):1-9. https://doi.org/10.1007/s00339-019-2874-4S191258T. Feurer, P. Reinhard, E. Avancini, B. Bissig, J. Löckinger, P. Fuchs, S. Buecheler, Progress in thin film CIGS photovoltaics–Research and development, manufacturing, and applications. Prog. Photovolt. Res. Appl. 25(7), 645–667 (2017)A. Zegadi, M.A. Slifkin, M. Djamin, A.E. Hill, R.D. Tomlinson, A photoacoustic study of CuInxGa1− xSe2 alloys. Phys. Status Solidi (A) 133(2), 533–540 (1992)T.H. Sajeesh, A.R. Warrier, C.S. Kartha, K.P. Vijayakumar, Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS. Thin Solid Films 518(15), 4370–4374 (2010)J. Liu, D. Zhuang, H. Luan, M. Cao, M. Xie, X. Li, Preparation of Cu (In, Ga) Se2 thin film by sputtering from Cu (In, Ga) Se2 quaternary target. Progr. Nat. Sci. Mater. Int. 23(2), 133–138 (2013)M.I. Hossain, Fabrication and characterization of CIGS solar cells with In2 S3 buffer layer deposited by PVD technique. Chalcogenide Lett. 9(5), 185–191 (2012)M.A. Mughal, R. Engelken, R. Sharma, Progress in indium (III) sulfide (In2S3) buffer layer deposition techniques for CIS, CIGS, and CdTe-based thin film solar cells. Sol. Energy 120, 131–146 (2015)M. Powalla, M. Cemernjak, J. Eberhardt, F. Kessler, R. Kniese, H.D. Mohring, B. Dimmler, Large-area CIGS modules: Pilot line production and new developments. Sol. Energy Mater Sol. Cells 90(18–19), 3158–3164 (2006)M.E. Calixto, P.J. Sebastian, R.N. Bhattacharya, R. Noufi, Compositional and optoelectronic properties of CIS and CIGS thin films formed by electrodeposition. Sol. Energy Mater. Sol. Cells 59(1–2), 75–84 (1999)S. Jung, S. Ahn, J.H. Yun, J. Gwak, D. Kim, K. Yoon, Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique. Curr. Appl. Phys. 10(4), 990–996 (2010)S. R. Ovshinsky, X. Deng, R. Young, U.S. Patent No. 5,231,047. Washington, DC: U.S. Patent and Trademark Office (1993).M. Kaelin, D. Rudmann, A.N. Tiwari, Low cost processing of CIGS thin film solar cells. Sol. Energy 77(6), 749–756 (2004)Fangdan Jiang, Jiayou Feng, Effect of temperature on selenization process of metallic Cu–In alloy precursors. Thin Solid Films 515(4), 1950–1955 (2006)S. Shirakata, Y. Kannaka, H. Hasegawa, T. Kariya, S. Isomura, Properties of Cu (In, Ga) Se2 thin films prepared by chemical spray pyrolysis. Jpn. J. Appl. Phys. 38(9R), 4997 (1999)Y.K. Kumar, G.S. Babu, P.U. Bhaskar, V.S. Raja, Effect of starting-solution pH on the growth of Cu2ZnSnS4 thin films deposited by spray pyrolysis. Phys. Status Solidi (A) 206(7), 1525–1530 (2009)M. Ajili, M. Castagné, N.K. Turki, Characteristics of CuIn1− xGaxS2 thin films synthesized by chemical spray pyrolysis. J. Lumin. 150, 1–7 (2014)B.J. Babu, S. Velumani, A. Kassiba, R. Asomoza, J.A. Chavez-Carvayar, J. Yi, Deposition and characterization of graded Cu (In1-xGax) Se2 thin films by spray pyrolysis. Mater. Chem. Phys. 162, 59–68 (2015)S.F. Varol, G. Babür, G. Çankaya, U. Kölemen, Synthesis of sol–gel derived nano-crystalline ZnO thin films as TCO window layer: effect of sol aging and boron. RSC Adv. 4(100), 56645–56653 (2014)J.A. Frantz, R.Y. Bekele, V.Q. Nguyen, J.S. Sanghera, A. Bruce, S.V. Frolov, I.D. Aggarwal, Cu (In, Ga) Se2 thin films and devices sputtered from a single target without additional selenization. Thin Solid Films 519(22), 7763–7765 (2011)C. Calderón, G. Gordillo, P. Bartolo-Pérez, F. Mesa, Effect of the deposition conditions on the optical, morphological and compositional properties of CuIn1− xGaxSe2 thin films prepared by a multistage process. Revista Mexicana de Física 53(7), 270–273 (2007)D. Schmid, M. Ruckh, F. Grunwald, H.W. Schock, Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe2. J. Appl. Phys. 73(6), 2902–2909 (1993)U.C. Matur, S. Akyol, N. Baydoğan, H. Cimenoglu, The optical properties of CIGS thin films derived by sol-gel dip coating process at different withdrawal speed. Proc. Soc. Behav. Sci. 195, 1762–1767 (2015)A. Bouich, B. Hartiti, S. Ullah, M.E. Touhami, B. Mari, D.M.F. Santos, Investigation of the optical properties of CuIn (Se, S)2 thin films for photovoltaic application. Mater. Today Proc. 13, 663–669 (2019)K. Matsumura, T. Fujita, H. Itoh, D. Fujita, Characterization of carrier concentration in CIGS solar cells by scanning capacitance microscopy. Meas. Sci. Technol. 25(4), 044020 (2014)A. Bouich, B. Hartiti, S. Ullah, H. Ullah, M.E. Touhami, D.M.F. Santos, B. Mari, Experimental, theoretical, and numerical simulation of the performance of CuInxGa(1–x) S2 based solar cells. Optik 183, 137–147 (2019

Mapping recommendations towards an Asian Code Against Cancer (ACAC) as part of the World Code Against Cancer Framework: an Asian National Cancer Centers Alliance (ANCCA) initiative

This paper outlines the process undertaken by Asian National Cancer Centers Alliance (ANCCA) members in working towards an Asian Code Against Cancer (ACAC). The process involves: (i) identification of the criteria for selecting the existing set of national recommendations for ACAC (ii) compilation of existing national codes or recommendations on cancer prevention (iii) reviewing the scientific evidence on cancer risk factors in Asia and (iv) establishment of one or more ACAC under the World Code Against Cancer Framework. A matrix of national codes or key recommendations against cancer in ANCCA member countries is presented. These include taking actions to prevent or control tobacco consumption, obesity, unhealthy diet, physical inactivity, alcohol consumption, exposure to occupational and environmental toxins; and to promote breastfeeding, vaccination against infectious agents and cancer screening. ANCCA will continue to serve as a supportive platform for collaboration, development, and advocacy of an ACAC jointly with the International Agency for Research on Cancer/World Health Organization (IARC/WHO)

Decoupling Environment-Dependent and Independent Genetic Robustness across Bacterial Species

The evolutionary origins of genetic robustness are still under debate: it may arise as a consequence of requirements imposed by varying environmental conditions, due to intrinsic factors such as metabolic requirements, or directly due to an adaptive selection in favor of genes that allow a species to endure genetic perturbations. Stratifying the individual effects of each origin requires one to study the pertaining evolutionary forces across many species under diverse conditions. Here we conduct the first large-scale computational study charting the level of robustness of metabolic networks of hundreds of bacterial species across many simulated growth environments. We provide evidence that variations among species in their level of robustness reflect ecological adaptations. We decouple metabolic robustness into two components and quantify the extents of each: the first, environmental-dependent, is responsible for at least 20% of the non-essential reactions and its extent is associated with the species' lifestyle (specialized/generalist); the second, environmental-independent, is associated (correlation = ∼0.6) with the intrinsic metabolic capacities of a species—higher robustness is observed in fast growers or in organisms with an extensive production of secondary metabolites. Finally, we identify reactions that are uniquely susceptible to perturbations in human pathogens, potentially serving as novel drug-targets

Neutrinos

Report of the Community Summer Study 2013 (Snowmass) Intensity Frontier Neutrino Working GroupReport of the Community Summer Study 2013 (Snowmass) Intensity Frontier Neutrino Working GroupThis document represents the response of the Intensity Frontier Neutrino Working Group to the Snowmass charge. We summarize the current status of neutrino physics and identify many exciting future opportunities for studying the properties of neutrinos and for addressing important physics and astrophysics questions with neutrinos

Neutrinos

229 pages229 pages229 pagesThe Proceedings of the 2011 workshop on Fundamental Physics at the Intensity Frontier. Science opportunities at the intensity frontier are identified and described in the areas of heavy quarks, charged leptons, neutrinos, proton decay, new light weakly-coupled particles, and nucleons, nuclei, and atoms