Adubação nitrogenada em milho e capim-xaraés sob plantio direto e preparo convencional em sistema agrossilvipastoril.

O objetivo deste trabalho foi avaliar o desempenho agronômico das culturas do milho e do capim-xaraés (Urochloa brizantha 'Xaraés') em consórcio, cultivadas em plantio direto e convencional, em sistema agrossilvipastoril, com a aplicação de diferentes doses de nitrogênio em cobertura. O experimento foi conduzido em área de cultivo de milho com a espécie florestal mulateiro (Calycophyllum spruceanum). Utilizou-se o delineamento experimental de blocos ao acaso, com arranjo em parcelas subdivididas, com dois sistemas de manejo do solo (plantio direto e convencional com grade pesada) alocados nas parcelas e com cinco doses de adubação nitrogenada em cobertura (0, 50, 100, 150 e 200 kg ha-1 de N), nas subparcelas, o que totalizou dez tratamentos. A produtividade de grãos de milho respondeu linearmente à aplicação de N em área de plantio convencional. Em área de plantio direto, a dose de 165 kg ha-1 de N em cobertura foi necessária para a obtenção de produtividades satisfatórias. A adubação nitrogenada em cobertura na cultura do milho, até a dose de 200 kg ha-1 de N, não influencia o rendimento do capim-xaraés em consórcio nas entrelinhas, após a colheita do milho

Analytical and experimental determination of signal-to-noise ratio and figure of merit in three phase-contrast imaging techniques

International audienceWe present a theoretical and experimental comparison of three X-ray phase-contrast techniques: propagation-based imaging, analyzer-based imaging and grating interferometry. The signal-to-noise ratio and the figure of merit are quantitatively compared for the three techniques on the same phantoms and using the same X-ray source and detector. Principal dependencies of the signal upon the numerous acquisition parameters, the spatial resolution and X-ray energy are discussed in detail. The sensitivity of each technique, in terms of the smallest detectable phase shift, is also evaluated

Rendimento de milho e braquiaria com diferentes doses de nitrogênio em cobertura em sistema agrossilvipastoril no Acre.

O objetivo deste trabalho foi avaliar o rendimento produtivo das culturas do milho e Brachiaria brizantha cv. Xaraés consorciadas, cultivadas a diferentes distâncias de árvores nativas de mulateiro (Calycophyllum spruceanum Benth) e com aplicação de diferentes doses de nitrogênio em cobertura, em um sistema agrossilvipastoril no Acre. O delineamento experimental utilizado foi de blocos ao acaso, arranjado em parcelas subdivididas, com duas posições de amostragem (Perto da Linha e Distante da Linha do mulateiro) nas parcelas e cinco doses de adubação nitrogenada em cobertura (0; 50; 100; 150; 200 kg ha) nas subparcelas, totalizando dez tratamentos. Foram avaliados na cultura do milho a altura de plantas, teor de clorofila foliar e a produtividade de grãos e para forragem o acúmulo de matéria seca. Constatou-se que a produtividade do milho não é afetada pelo mulateiro aos quatro anos de idade e a adubação nitrogenada em cobertura até a dose de 200 Kg ha de N aumenta linearmente a produtividade de grãos. A pastagem formada apresentou acúmulo de matéria seca da forragem estatisticamente igual para todos os tratamentos, aos 90 dias após a colheita do milho

Simplified retrieval method for Edge illumination X-ray phase contrast imaging allowing multi-modal imaging with fewer input frames

We present data from an implementation of Edge Illumination (EI) that uses a detector aperture designed for increasing dynamic range, suitable for clinically relevant X-ray energies and demonstrated here using synchrotron radiation. By utilising a sufficiently large crosstalk between pixels, this implementation enables single-scan imaging for phase and absorption, and double-scan for phase, absorption and dark field imaging. The presence of the detector mask enables a direct comparison between conventional EI and beam tracking (BT), which we conduct through Monte Carlo and analytical modelling in the case of a single-scan being used for the retrieval of all three contrasts. In the present case, where the X-ray beam width is comparable to the pixel size, we provide an analysis on best-positioning of the beam on the detector for accurate signal retrieval. Further, we demonstrate an application of this method by distinguishing different concentrations of microbubbles via their dark field signals at high energy using an EI system

High dynamic range beam profile measurements

In future high intensity, high energy accelerators, beam loss has to be minimized to maximize performance and reduce activation of accelerator components. It is imperative to have a clear understanding of the mechanisms that can lead to halo formation and to have the possibility to test available theoretical models with an adequate experimental setup. Measurements based on optical transition radiation (OTR) provide an interesting opportunity for high resolution measurements of the transverse beam profile. In order to be applicable for measurements within the beam halo region, it is of utmost importance that a high dynamic range is covered by the image acquisition system. The existing camera system as it is installed in the CLIC Test Facility (CTF3) is compared to a step-by-step measurement with a photo multiplier tube (PMT) and measurements with a cooled charge injection device (CID) camera. The latter acquisition technique provides an innovative and highly flexible approach to high dynamic range measurements and is presented in some detail

Evaluation of the LEP Centre-of-Mass Energy Above the W-Pair Production Threshold

Knowledge of the centre-of-mass energy at LEP2 is of primary importance to set the absolute energy scale for the measurement of the W-boson mass. The beam energy above 80 GeV is derived from continuous measurements of the magnetic bending field by 16 NMR probes situated in a number of the LEP dipoles. The relationship between the fields measured by the probes and the beam energy is calibrated against precise measurements of the average beam energy between 41 and 55 GeV made using the resonant depolarisation technique. The linearity of the relationship is tested by comparing the fields measured by the probes with the total bending field measured by a flux loop. This test results in the largest contribution to the systematic uncertainty. Several further corrections are applied to derive the the centre-of-mass energies at each interaction point. In addition the centre-of-mass energy spread is evaluated. The beam energy has been determined with a precision of 25 MeV for the data taken in 1997, corresponding to a relative precision of 2.7x10^{-4}. This is small in comparison to the present uncertainty on the W mass measurement at LEP. However, the ultimate statistical precision on the W mass with the full LEP2 data sample should be around 25 MeV, and a smaller uncertainty on the beam energy is desirable. Prospects for improvements are outlined.Comment: 24 pages, 10 figures, Latex, epsfig; replaced by version accepted by European Physical Journal

Status of the HIE-ISOLDE project at CERN

The HIE-ISOLDE project represents a major upgrade of the ISOLDE nuclear facility with a mandate to significantly improve the quality and increase the intensity and energy of radioactive nuclear beams produced at CERN. The project will expand the experimental nuclear physics programme at ISOLDE by focusing on an upgrade of the existing Radioactive ion beam EXperiment (REX) linac with a 40 MV superconducting linac comprising thirty-two niobium-on-copper sputter-coated quarter-wave resonators housed in six cryomodules. The new linac will raise the energy of post-accelerated beams from 3 MeV/u to over 10 MeV/u. The upgrade will be staged to first deliver beam energies of 5.5 MeV/u using two high-$\beta$ cryomodules placed downstream of REX, before the energy variable section of the existing linac is replaced with two low-$\beta$ cryomodules and two additional high-$\beta$ cryomodules are installed to attain over 10 MeV/u with full energy variability above 0.45 MeV/u. An overview of the project including a status summary of the different R&D activities and the schedule will outlined.Comment: 7 pages, 12 figures, submitted to the Heavy Ion Accelerator Technology conference (HIAT) 2012, in Chicag