Effects of footwear variations on three-dimensional kinematics and tibial accelerations of specific movements in American football

American football is associated with a high rate of non-contact chronic injuries. Players are able to select from both high and low cut footwear. The aim of the current investigation was to examine the influence of high and low cut American football specific footwear on tibial accelerations and three-dimensional (3D) kinematics during three sport specific movements. Twelve male American football players performed three movements, run, cut and vertical jump whilst wearing both low and high cut footwear. 3D kinematics of the lower extremities were measured using an eight-camera motion analysis system alongside tibial acceleration parameters which were obtained using a shank mounted accelerometer. Tibial acceleration and 3D kinematic differences between the different footwear were examined using either repeated measures or Friedman’s ANOVA. Tibial accelerations were significantly greater in the low cut footwear in comparison to the high cut footwear for the run and cut movements. In addition, peak ankle eversion and tibial internal rotation parameters were shown to be significantly greater in the low cut footwear in the running and cutting movement conditions. The current study indicates that the utilization of low cut American football footwear for training/performance may place American footballers at increased risk from chronic injuries

Sensitivity of Shear Process in Metal Cutting to the Development of Residual Stress

Machining processes are widely used for producing a component by material removal. Material is removed in the form of chips through the action of the wedge-shaped cutting tool. As the tool proceeds, the material is first elastically deformed, and then plastically deformed. The mechanism of plastic deformation in metal is dislocation movement Typical machining processes include turning, milling, drilling, shaping and grinding. It is known that the chip formation process in metal cutting is quite unique in many ways [1]. First, the process is a localized, asymmetric deformation that takes place at very large strains and exceptionally high strain rates in a small deformation zone. Typical values for strains and strain rates range 2 to 5 and 104 to 109 per second, respectively. Second, it is relatively unconstrained in that the only external constraint is the length of contact between tool and chip on the rake face of the tool. On the rake face there may be seizure as well as sliding friction. Machining introduces a large amount of plastic deformation in the workpiece material and chip. This plastic strain is nonuniform, and therefore residual stresses are induced in the workpiece surface and subsurface throughout, and slight below, the depth of plastic deformation. Thus, residual stresses are often an undesirable but unavoidable by-product of machining

Excess pressure as an analogue of blood flow velocity

INTRODUCTION: Derivation of blood flow velocity from a blood pressure waveform is a novel technique, which could have potential clinical importance. Excess pressure, calculated from the blood pressure waveform via the reservoir-excess pressure model, is purported to be an analogue of blood flow velocity but this has never been examined in detail, which was the aim of this study. METHODS: Intra-arterial blood pressure was measured sequentially at the brachial and radial arteries via fluid-filled catheter simultaneously with blood flow velocity waveforms recorded via Doppler ultrasound on the contralateral arm (n = 98, aged 61 ± 10 years, 72% men). Excess pressure was derived from intra-arterial blood pressure waveforms using pressure-only reservoir-excess pressure analysis. RESULTS: Brachial and radial blood flow velocity waveform morphology were closely approximated by excess pressure derived from their respective sites of measurement (median cross-correlation coefficient r = 0.96 and r = 0.95 for brachial and radial comparisons, respectively). In frequency analyses, coherence between blood flow velocity and excess pressure was similar for brachial and radial artery comparisons (brachial and radial median coherence = 0.93 and 0.92, respectively). Brachial and radial blood flow velocity pulse heights were correlated with their respective excess pressure pulse heights (r = 0.53, P < 0.001 and r = 0.43, P < 0.001, respectively). CONCLUSION: Excess pressure is an analogue of blood flow velocity, thus affording the opportunity to derive potentially important information related to arterial blood flow using only the blood pressure waveform

Influences on condom use: A secondary analysis of women's perceptions from the Australian Contraceptive ChOice pRoject (ACCORd) trial.

Background and objectives Women’s ability to negotiate condom use helps prevent sexually transmissible infections (STIs) and unintended pregnancies. The aim of this study was to assess the relationship between substance use, risk perception and the certainty of using condoms in several hypothetical situations. Methods This is a secondary analysis from the Australian Contraceptive ChOice pRoject (ACCORd) cluster randomised controlled trial. Descriptive statistics and logistic regression were used for the analysis. Results At baseline, contraceptive questions were answered by 698 women attending 57 general practices in Melbourne, Australia. Condom use was reported by 47%. Of those using condoms as the sole form of contraception (n = 137), 20% used them inconsistently. Dual protection was used by 58% of women (188/325). Condoms and the pill were more frequently used than condoms and longer-acting contraceptives. Women were less likely to be confident negotiating condom use when using substances. Discussion Substance use and the concurrent use of other forms of contraception impact use of condoms. Even when condoms are the sole form of contraception with willing partners, use is inconsistent, leaving women at risk of pregnancy and STI

Impact of generic alendronate cost on the cost-effectiveness of osteoporosis screening and treatment

Introduction: Since alendronate became available in generic form in the Unites States in 2008, its price has been decreasing. The objective of this study was to investigate the impact of alendronate cost on the cost-effectiveness of osteoporosis screening and treatment in postmenopausal women. Methods: Microsimulation cost-effectiveness model of osteoporosis screening and treatment for U.S. women age 65 and older. We assumed screening initiation at age 65 with central dual-energy x-ray absorptiometry (DXA), and alendronate treatment for individuals with osteoporosis; with a comparator of "no screening" and treatment only after fracture occurrence. We evaluated annual alendronate costs of $20 through$800; outcome measures included fractures; nursing home admission; medication adverse events; death; costs; quality-adjusted life-years (QALYs); and incremental cost-effectiveness ratios (ICERs) in 2010 U.S. dollars per QALY gained. A lifetime time horizon was used, and direct costs were included. Base-case and sensitivity analyses were performed. Results: Base-case analysis results showed that at annual alendronate costs of $200 or less, osteoporosis screening followed by treatment was cost-saving, resulting in lower total costs than no screening as well as more QALYs (10.6 additional quality-adjusted life-days). When assuming alendronate costs of$400 through $800, screening and treatment resulted in greater lifetime costs than no screening but was highly cost-effective, with ICERs ranging from$714 per QALY gained through $13,902 per QALY gained. Probabilistic sensitivity analyses revealed that the cost-effectiveness of osteoporosis screening followed by alendronate treatment was robust to joint input parameter estimate variation at a willingness-to-pay threshold of$50,000/QALY at all alendronate costs evaluated. Conclusions: Osteoporosis screening followed by alendronate treatment is effective and highly cost-effective for postmenopausal women across a range of alendronate costs, and may be cost-saving at annual alendronate costs of $200 or less. © 2012 Nayak et al

Can Technological Artefacts Be Moral Agents?

In this paper we discuss the hypothesis that, ‘moral agency is distributed over both humans and technological artefacts’, recently proposed by Peter-Paul Verbeek. We present some arguments for thinking that Verbeek is mistaken. We argue that artefacts such as bridges, word processors, or bombs can never be (part of) moral agents. After having discussed some possible responses, as well as a moderate view proposed by Illies and Meijers, we conclude that technological artefacts are neutral tools that are at most bearers of instrumental value

A Review of Pharmacologic Treatment for Compulsive Buying Disorder

At present, no treatment recommendations can be made for compulsive buying disorder. Recent studies have found evidence for the efficacy of psychotherapeutic options, but less is known regarding the best pharmacologic treatment. The purpose of this review is to present and analyze the available published evidence on the pharmacological treatment of compulsive buying disorder. To achieve this, we conducted a review of studies focusing on the pharmacological treatment of compulsive buying by searching the PubMed/MEDLINE database. Selection criteria were applied, and 21 studies were identified. Pharmacological classes reported included antidepressants, mood stabilizers, opioid antagonists, second-generation antipsychotics, and N-methyl-D-aspartate receptor antagonists. We found only placebo-controlled trials for fluvoxamine; none showed effectiveness against placebo. Three open-label trials reported clinical improvement with citalopram; one was followed by a double-blind discontinuation. Escitalopram was effective in an open-label trial but did not show efficacy in the double-blind phase. Memantine was identified as effective in a pilot open-label study. Fluoxetine, bupropion, nortriptyline, clomipramine, topiramate and naltrexone were only reported to be effective in clinical cases. According to the available literature, there is no evidence to propose a specific pharmacologic agent for compulsive buying disorder. Future research is required for a better understanding of both pathogenesis and treatment of this disorder.info:eu-repo/semantics/publishedVersio

Discovery (theoretical prediction and experimental observation) of a large-gap topological-insulator class with spin-polarized single-Dirac-cone on the surface

Recent theories and experiments have suggested that strong spin-orbit coupling effects in certain band insulators can give rise to a new phase of quantum matter, the so-called topological insulator, which can show macroscopic entanglement effects. Such systems feature two-dimensional surface states whose electrodynamic properties are described not by the conventional Maxwell equations but rather by an attached axion field, originally proposed to describe strongly interacting particles. It has been proposed that a topological insulator with a single spin-textured Dirac cone interfaced with a superconductor can form the most elementary unit for performing fault-tolerant quantum computation. Here we present an angle-resolved photoemission spectroscopy study and first-principle theoretical calculation-predictions that reveal the first observation of such a topological state of matter featuring a single-surface-Dirac-cone realized in the naturally occurring Bi$_2$Se$_3$ class of materials. Our results, supported by our theoretical predictions and calculations, demonstrate that undoped compound of this class of materials can serve as the parent matrix compound for the long-sought topological device where in-plane surface carrier transport would have a purely quantum topological origin. Our study further suggests that the undoped compound reached via n-to-p doping should show topological transport phenomena even at room temperature.Comment: 3 Figures, 18 pages, Submitted to NATURE PHYSICS in December 200

Sub-Saharan Africa's Mothers, Newborns, and Children: Where and Why Do They Die?

In the first article in a series on maternal, newborn, and child health in sub-Saharan Africa, Joy Lawn and colleagues outline where and why deaths among mothers and children occur and what known interventions can be employed to prevent these deaths