Liquid immersion apparatus for minute articles

Apparatus is disclosed for immersing minute integrated circuit chips in an etching solution in manufacturing integrated circuits during research and development. The apparatus includes a holder, having a handle and basket support for carrying a removable unitary basket and lid structure where fluid flow-through passages are formed, and wherein graduated openings in the handle provide for adjustably supporting the basket in a breaker at a desired level

Viscous coupling of shear-free turbulence across nearly flat fluid interfaces

The interactions between shear-free turbulence in two regions (denoted as + and − on either side of a nearly flat horizontal interface are shown here to be controlled by several mechanisms, which depend on the magnitudes of the ratios of the densities, ρ+/ρ−, and kinematic viscosities of the fluids, μ+/μ−, and the root mean square (r.m.s.) velocities of the turbulence, u0+/u0−, above and below the interface. This study focuses on gas–liquid interfaces so that ρ+/ρ− ≪ 1 and also on where turbulence is generated either above or below the interface so that u0+/u0− is either very large or very small. It is assumed that vertical buoyancy forces across the interface are much larger than internal forces so that the interface is nearly flat, and coupling between turbulence on either side of the interface is determined by viscous stresses. A formal linearized rapid-distortion analysis with viscous effects is developed by extending the previous study by Hunt & Graham (J. Fluid Mech., vol. 84, 1978, pp. 209–235) of shear-free turbulence near rigid plane boundaries. The physical processes accounted for in our model include both the blocking effect of the interface on normal components of the turbulence and the viscous coupling of the horizontal field across thin interfacial viscous boundary layers. The horizontal divergence in the perturbation velocity field in the viscous layer drives weak inviscid irrotational velocity fluctuations outside the viscous boundary layers in a mechanism analogous to Ekman pumping. The analysis shows the following. (i) The blocking effects are similar to those near rigid boundaries on each side of the interface, but through the action of the thin viscous layers above and below the interface, the horizontal and vertical velocity components differ from those near a rigid surface and are correlated or anti-correlated respectively. (ii) Because of the growth of the viscous layers on either side of the interface, the ratio uI/u0, where uI is the r.m.s. of the interfacial velocity fluctuations and u0 the r.m.s. of the homogeneous turbulence far from the interface, does not vary with time. If the turbulence is driven in the lower layer with ρ+/ρ− ≪ 1 and u0+/u0− ≪ 1, then uI/u0− ~ 1 when Re (=u0−L−/ν−) ≫ 1 and R = (ρ−/ρ+)(v−/v+)1/2 ≫ 1. If the turbulence is driven in the upper layer with ρ+/ρ− ≪ 1 and u0+/u0− ≫ 1, then uI/u0+ ~ 1/(1 + R). (iii) Nonlinear effects become significant over periods greater than Lagrangian time scales. When turbulence is generated in the lower layer, and the Reynolds number is high enough, motions in the upper viscous layer are turbulent. The horizontal vorticity tends to decrease, and the vertical vorticity of the eddies dominates their asymptotic structure. When turbulence is generated in the upper layer, and the Reynolds number is less than about 106–107, the fluctuations in the viscous layer do not become turbulent. Nonlinear processes at the interface increase the ratio uI/u0+ for sheared or shear-free turbulence in the gas above its linear value of uI/u0+ ~ 1/(1 + R) to (ρ+/ρ−)1/2 ~ 1/30 for air–water interfaces. This estimate agrees with the direct numerical simulation results from Lombardi, De Angelis & Bannerjee (Phys. Fluids, vol. 8, no. 6, 1996, pp. 1643–1665). Because the linear viscous–inertial coupling mechanism is still significant, the eddy motions on either side of the interface have a similar horizontal structure, although their vertical structure differs

An investigation of the anabolic actions of biosynthetic human growth hormone after injury by burning

Previous clinical trials in normal subjects and post-operative patients have shown that biosynthetic growth hormone preparations increase nitrogen retention. It has been suggested that their administration to injured patients may be beneficial. A clinical trial is presented of twelve adult burned patients of whom six were allocated to receive biosynthetic human growth hormone (somatropin) and six to form a control group. Injury by burning is followed by increases in resting energy expenditure and urinary nitrogen excretion, accompanied by insulin resistance and glucose intolerance. There is a generalised fall in plasma protein concentrations, including the somatomedin, insulin-like growth factor-I. Somatropin administration causes no change in the rate of protein oxidation, the positivity of nitrogen balance or, either serum somatomedin or plasma protein concentrations. It causes an increase in the insulin-resistance already present in burned patients. Two further studies are presented in which somatropin is compared with a placebo in both unburned and burned rats. Injury by burning causes weight-loss, an increase in urinary nitrogen excretion, a fall in the serum albumin and somatomedin concentrations, and a reduction in the strength of healing laparotomy wounds. Somatropin administration to unburned rats causes a small rise in the serum somatomedin concentration and a transient increase in wound-strength. It causes no increase in the positivity of nitrogen balance or weight-gain. Its administration to the burned rat causes no effect on the serum somatomedin concentration, nitrogen balance, weight-gain or wound-healing. These three studies show that somatropin has no anabolic effect soon after injury by burning. I postulate that this failure reflects the changes observed after injury in somatomedin concentrations and the responsiveness of somatomedins to somatropin. I conclude that somatropin and related compounds are not suitable for use as anabolic agents soon after injury by burning

Interplanetary Sample Return Missions Using Radioisotope Electric Propulsion

Solar electric propulsion (SEP) is being used for a variety of planetary missions sponsored by ESA, JAXA, and NASA and nuclear electric propulsion (NEP) is being considered for future, flagship-class interplanetary missions. Radioisotope electric propulsion (REP) has recently been shown to effectively complement SEP and NEP for missions to high-AU targets with modest payload requirements. This paper investigates the application of an advanced REP for a sample return from the comet Tempel 1. A set of mission and system parameters are varied with the goal of quantifying their impact on total mission payload. Mission parameters considered include trip-time and Earth return entry interface speed of the sample return system. System parameters considered include launch vehicle, power level of spacecraft at beginning of mission, and thruster specific impulse. For the baseline case of Atlas 401 and REP power level of 750 W, the mission time was 12 years, the payload was 144 kg, and the missions optimized to a single specific impulse generally within Hall ion thruster range. Other cases were investigated in support of graduate studies, and include the larger Atlas 551 launch vehicle and extended power level to 1 kW. The Atlas 551 cases tended to optimize dual specific impulses generally in the Hall ion thruster range for both legs of the mission. A power level of at least 1-kW and trip-time of approximately 11 years was required to obtain a total science payload close to 320 kg for the Atlas 401 launch vehicle. An Atlas 551 launch vehicle yielded a science payload of approximately 540 kg for the case of 1-kW of power and an 11-year trip time, and nearly 250 kg of science payload for the case of 1-kW of power and a 6-year trip time. Results are also reported indicating the performance ramifications of meeting a reduced Earth entry interface velocity constraint

Widespread pain and depression are key modifiable risk factors associated with reduced social participation in older adults: A prospective cohort study in primary care.

In older adults, reduced social participation increases the risk of poor health-related quality of life, increased levels of inflammatory markers and cardiovascular disease, and increased mortality. Older adults frequently present to primary care, which offers the potential to deliver interventions at the point of care to increase social participation. The aim of this prospective study was to identify the key modifiable exposures that were associated with reduced social participation in a primary care population of older adults.The study was a population-based prospective cohort study. Participants (n = 1991) were those aged ≥65 years who had completed questionnaires at baseline, and 3 and 6-year follow-ups. Generalized linear mixed modeling framework was used to test for associations between exposures and decreasing social participation over 6 years.At baseline, 44% of participants reported reduced social participation, increasing to 49% and 55% at 3 and 6-year follow-up. Widespread pain and depression had the strongest independent association with reduced social participation over the 6-year follow-up period. The prevalence of reduced social participation for those with widespread pain was 106% (adjusted incidence rate ratio 2.06, 95% confidence interval 1.72, 2.46), higher than for those with no pain. Those with depression had an increased prevalence of 82% (adjusted incidence rate ratio 1.82, 95% confidence interval 1.62, 2.06). These associations persisted in multivariate analysis.Population ageing will be accompanied by increasing numbers of older adults with pain and depression. Future trials should assess whether screening for widespread pain and depression, and targeting appropriate treatment in primary care, increase social participation in older people

Boundary-layer friction in midlatitude cyclone

Results from an idealized three-dimensional baroclinic life-cycle model are interpreted in a potential vorticity (PV) framework to identify the physical mechanisms by which frictional processes acting in the atmospheric boundary layer modify and reduce the baroclinic development of a midlatitude storm. Considering a life cycle where the only non-conservative process acting is boundary-layer friction, the rate of change of depth-averaged PV within the boundary layer is governed by frictional generation of PV and the flux of PV into the free troposphere. Frictional generation of PV has two contributions: Ekman generation, which is directly analogous to the well-known Ekman-pumping mechanism for barotropic vortices, and baroclinic generation, which depends on the turning of the wind in the boundary layer and low-level horizontal temperature gradients. It is usually assumed, at least implicitly, that an Ekman process of negative PV generation is the mechanism whereby friction reduces the strength and growth rates of baroclinic systems. Although there is evidence for this mechanism, it is shown that baroclinic generation of PV dominates, producing positive PV anomalies downstream of the low centre, close to developing warm and cold fronts. These PV anomalies are advected by the large-scale warm conveyor belt flow upwards and polewards, fluxed into the troposphere near the warm front, and then advected westwards relative to the system. The result is a thin band of positive PV in the lower troposphere above the surface low centre. This PV is shown to be associated with a positive static stability anomaly, which Rossby edge wave theory suggests reduces the strength of the coupling between the upper- and lower-level PV anomalies, thereby reducing the rate of baroclinic development. This mechanism, which is a result of the baroclinic dynamics in the frontal regions, is in marked contrast with simple barotropic spin-down ideas. Finally we note the implications of these frictionally generated PV anomalies for cyclone forecasting

The NASA Micro Pulse Lidar Network (MPLNET): Introduction of the New Version 3 Release

The NASA Micro-Pulse Lidar Network (MPLNET) is a global federated network of polarized Micro-Pulse Lidar (MPL) systems running continuously. MPLNET began in 2000, and there have been over 70 sites deployed worldwide, with 24 sites currently active and a few more planned over the next year. Seven of the long-term sites have 10+ years of data, and many more have 5+ years. Most sites are co-located with AERONET providing joint data on column and vertically resolved aerosol and cloud information. This presentation will introduce our new Version 3 MPLNET data. All sites in the network now feature eye-safe polarized backscatter MPL instruments, providing information on attenuated backscatter and particle shape. In addition to change with our signal data, we have an enhanced cloud product suite, a new PBL height product, and inclusion of the new AERONET lunar aerosol optical depth into MPLNET aerosol retrievals. A new quality flag process will be used to better describe all data products. Finally, a new data portal will provide near-real-time (NRT) access to all data products, including new quality assured NRT L1.5 products. Custom products developed for model specific applications will also be provided