107 research outputs found
Spatially-resolved electronic and vibronic properties of single diamondoid molecules
Diamondoids are a unique form of carbon nanostructure best described as
hydrogen-terminated diamond molecules. Their diamond-cage structures and
tetrahedral sp3 hybrid bonding create new possibilities for tuning electronic
band gaps, optical properties, thermal transport, and mechanical strength at
the nanoscale. The recently-discovered higher diamondoids (each containing more
than three diamond cells) have thus generated much excitement in regards to
their potential versatility as nanoscale devices. Despite this excitement,
however, very little is known about the properties of isolated diamondoids on
metal surfaces, a very relevant system for molecular electronics. Here we
report the first molecular scale study of individual tetramantane diamondoids
on Au(111) using scanning tunneling microscopy and spectroscopy. We find that
both the diamondoid electronic structure and electron-vibrational coupling
exhibit unique spatial distributions characterized by pronounced line nodes
across the molecular surfaces. Ab-initio pseudopotential density functional
calculations reveal that the observed dominant electronic and vibronic
properties of diamondoids are determined by surface hydrogen terminations, a
feature having important implications for designing diamondoid-based molecular
devices.Comment: 16 pages, 4 figures. to appear in Nature Material
Room temperature plasmon laser by total internal reflection
Plasmon lasers create and sustain intense and coherent optical fields below
light's diffraction limit with the unique ability to drastically enhance
light-matter interactions bringing fundamentally new capabilities to
bio-sensing, data storage, photolithography and optical communications.
However, these important applications require room temperature operation, which
remains a major hurdle. Here, we report a room temperature semiconductor
plasmon laser with both strong cavity feedback and optical confinement to
1/20th of the wavelength. The strong feedback arises from total internal
reflection of surface plasmons, while the confinement enhances the spontaneous
emission rate by up to 20 times.Comment: 8 Page, 2 Figure
Integrated plasmonic circuitry on a vertical-cavity surface-emitting semiconductor laser platform
Integrated plasmonic sources and detectors are imperative in the practical development of plasmonic circuitry for bio- and chemical sensing, nanoscale optical information processing, as well as transducers for high-density optical data storage. Here we show that vertical-cavity surface-emitting lasers (VCSELs) can be employed as an on-chip, electrically pumped source or detector of plasmonic signals, when operated in forward or reverse bias, respectively. To this end, we experimentally demonstrate surface plasmon polariton excitation, waveguiding, frequency conversion and detection on a VCSEL-based plasmonic platform. The coupling efficiency of the VCSEL emission to waveguided surface plasmon polariton modes has been optimized using asymmetric plasmonic nanostructures. The plasmonic VCSEL platform validated here is a viable solution for practical realizations of plasmonic functionalities for various applications, such as those requiring sub-wavelength field confinement, refractive index sensitivity or optical near-field transduction with electrically driven sources, thus enabling the realization of on-chip optical communication and lab-on-a-chip devices
A microchip optomechanical accelerometer
The monitoring of accelerations is essential for a variety of applications
ranging from inertial navigation to consumer electronics. The basic operation
principle of an accelerometer is to measure the displacement of a flexibly
mounted test mass; sensitive displacement measurement can be realized using
capacitive, piezo-electric, tunnel-current, or optical methods. While optical
readout provides superior displacement resolution and resilience to
electromagnetic interference, current optical accelerometers either do not
allow for chip-scale integration or require bulky test masses. Here we
demonstrate an optomechanical accelerometer that employs ultra-sensitive
all-optical displacement read-out using a planar photonic crystal cavity
monolithically integrated with a nano-tethered test mass of high mechanical
Q-factor. This device architecture allows for full on-chip integration and
achieves a broadband acceleration resolution of 10 \mu g/rt-Hz, a bandwidth
greater than 20 kHz, and a dynamic range of 50 dB with sub-milliwatt optical
power requirements. Moreover, the nano-gram test masses used here allow for
optomechanical back-action in the form of cooling or the optical spring effect,
setting the stage for a new class of motional sensors.Comment: 16 pages, 9 figure
An off-board quantum point contact as a sensitive detector of cantilever motion
Recent advances in the fabrication of microelectromechanical systems (MEMS)
and their evolution into nanoelectromechanical systems (NEMS) have allowed
researchers to measure extremely small forces, masses, and displacements. In
particular, researchers have developed position transducers with resolution
approaching the uncertainty limit set by quantum mechanics. The achievement of
such resolution has implications not only for the detection of quantum behavior
in mechanical systems, but also for a variety of other precision experiments
including the bounding of deviations from Newtonian gravity at short distances
and the measurement of single spins. Here we demonstrate the use of a quantum
point contact (QPC) as a sensitive displacement detector capable of sensing the
low-temperature thermal motion of a nearby micromechanical cantilever.
Advantages of this approach include versatility due to its off-board design,
compatibility with nanoscale oscillators, and, with further development, the
potential to achieve quantum limited displacement detection.Comment: 5 pages, 5 figure
Gate-Controlled Ionization and Screening of Cobalt Adatoms on a Graphene Surface
We describe scanning tunneling spectroscopy (STS) measurements performed on
individual cobalt (Co) atoms deposited onto backgated graphene devices. We find
that Co adatoms on graphene can be ionized by either the application of a
global backgate voltage or by the application of a local electric field from a
scanning tunneling microscope (STM) tip. Large screening clouds are observed to
form around Co adatoms ionized in this way, and we observe that some intrinsic
graphene defects display a similar behavior. Our results provide new insight
into charged impurity scattering in graphene, as well as the possibility of
using graphene devices as chemical sensors.Comment: 19 pages, 4 figure
Electrical generation and absorption of phonons in carbon nanotubes
The interplay between discrete vibrational and electronic degrees of freedom
directly influences the chemical and physical properties of molecular systems.
This coupling is typically studied through optical methods such as
fluorescence, absorption, and Raman spectroscopy. Molecular electronic devices
provide new opportunities for exploring vibration-electronic interactions at
the single molecule level. For example, electrons injected from a scanning
tunneling microscope tip into a metal can excite vibrational excitations of a
molecule in the gap between tip and metal. Here we show how current directly
injected into a freely suspended individual single-wall carbon nanotube can be
used to excite, detect, and control a specific vibrational mode of the
molecule. Electrons inelastically tunneling into the nanotube cause a
non-equilibrium occupation of the radial breathing mode, leading to both
stimulated emission and absorption of phonons by successive electron tunneling
events. We exploit this effect to measure a phonon lifetime on the order of 10
nanoseconds, corresponding to a quality factor well over 10000 for this
nanomechanical oscillator.Comment: 17 pages, 4 figure
A Tunable Two-impurity Kondo system in an atomic point contact
Two magnetic atoms, one attached to the tip of a Scanning Tunneling
Microscope (STM) and one adsorbed on a metal surface, each constituting a Kondo
system, have been proposed as one of the simplest conceivable systems
potentially exhibiting quantum critical behaviour. We have succeeded in
implementing this concept experimentally for cobalt dimers clamped between an
STM tip and a gold surface. Control of the tip-sample distance with
sub-picometer resolution allows us to tune the interaction between the two
cobalt atoms with unprecedented precision. Electronic transport measurements on
this two-impurity Kondo system reveal a rich physical scenario which is
governed by a crossover from local Kondo screening to non-local singlet
formation due to antiferromagnetic coupling as a function of separation of the
cobalt atoms.Comment: 22 pages, 5 figure
Magnetic Resonance Force Microscopy of paramagnetic electron spins at millikelvin temperatures
Magnetic Resonance Force Microscopy (MRFM) is a powerful technique to detect
a small number of spins that relies on force-detection by an ultrasoft
magnetically tipped cantilever and selective magnetic resonance manipulation of
the spins. MRFM would greatly benefit from ultralow temperature operation,
because of lower thermomechanical noise and increased thermal spin
polarization. Here, we demonstrate MRFM operation at temperatures as low as 30
mK, thanks to a recently developed SQUID-based cantilever detection technique
which avoids cantilever overheating. In our experiment, we detect dangling bond
paramagnetic centers on a silicon surface down to millikelvin temperatures.
Fluctuations of such kind of defects are supposedly linked to 1/f magnetic
noise and decoherence in SQUIDs as well as in several superconducting and
single spin qubits. We find evidence that spin diffusion plays a key role in
the low temperature spin dynamics.Comment: 7 pages, 5 figure
A tunable carbon nanotube electromechanical oscillator
Nanoelectromechanical systems (NEMs) hold promise for a number of scientific
and technological applications. In particular, NEMs oscillators have been
proposed for use in ultrasensitive mass detection, radio-frequency signal
processing, and as a model system for exploring quantum phenomena in
macroscopic systems. Perhaps the ultimate material for these applications is a
carbon nanotube. They are the stiffest material known, have low density,
ultrasmall cross-sections and can be defect-free. Equally important, a nanotube
can act as a transistor and thus may be able to sense its own motion. In spite
of this great promise, a room-temperature, self-detecting nanotube oscillator
has not been realized, although some progress has been made. Here we report the
electrical actuation and detection of the guitar-string-like oscillation modes
of doubly clamped nanotube oscillators. We show that the resonance frequency
can be widely tuned and that the devices can be used to transduce very small
forces.Comment: 9 pages, 3 figure
- …