Rapid thermal annealing of graphene-metal contact

Cataloged from PDF version of article.High quality graphene-metal contacts are desirable for high-performance graphene based electronics. Process related factors result large variation in the contact resistance. A post-processing method is needed to improve graphene-metal contacts. In this letter, we studied rapid thermal annealing (RTA) of graphene-metal contacts. We present results of a systematic investigation of device scaling before and after RTA for various metals. The results reveal that RTA provides a convenient technique to reduce contact resistance, thus to obtain reproducible device operation. (C) 2012 American Institute of Physics

Plasmon-polaritons on graphene-metal surface and their use in biosensors

Cataloged from PDF version of article.We studied excitation of surface plasmon-polaritons on graphene-metal surface. The metal surface is functionalized by transfer printing of graphene grown by chemical vapor deposition on copper foils. Surface plasmon resonance characteristics of monolayer and multilayer graphene on the metal surface are presented. We were able to obtain the dispersion relation of graphene-metal surface which reveals the essential feature of the plasmon-polaritons. As an application, we fabricated a surface plasmon resonance sensor integrated with a microfluidic device to study nonspecific physical interaction between graphene layer and proteins. (C) 2012 American Institute of Physics

Synthesis of Graphene on Gold

Here we report chemical vapor deposition of graphene on gold surface at ambient pressure. We studied effects of the growth temperature, pressure and cooling process on the grown graphene layers. The Raman spectroscopy of the samples reveals the essential properties of the graphene grown on gold surface. In order to characterize the electrical properties of the grown graphene layers, we have transferred them on insulating substrates and fabricated field effect transistors. Owing to distinctive properties of gold, the ability to grow graphene layers on gold surface could open new applications of graphene in electrochemistry and spectroscopy.Comment: 8 pages, 4 figure

Graphene-enabled electrically switchable radar-absorbing surfaces

Radar-absorbing materials are used in stealth technologies for concealment of an object from radar detection. Resistive and/or magnetic composite materials are used to reduce the backscattered microwave signals. Inability to control electrical properties of these materials, however, hinders the realization of active camouflage systems. Here, using large-area graphene electrodes, we demonstrate active surfaces that enable electrical control of reflection, transmission and absorption of microwaves. Instead of tuning bulk material property, our strategy relies on electrostatic tuning of the charge density on an atomically thin electrode, which operates as a tunable metal in microwave frequencies. Notably, we report large-area adaptive radar-absorbing surfaces with tunable reflection suppression ratio up to 50 dB with operation voltages <5 V. Using the developed surfaces, we demonstrate various device architectures including pixelated and curved surfaces. Our results provide a significant step in realization of active camouflage systems in microwave frequencies. © 2015 Macmillan Publishers Limited. All rights reserved

Synthesis of Large Area Graphene for High Performance in Flexible Optoelectronic Devices

This work demonstrates an attractive low-cost route to obtain large area and high-quality graphene films by using the ultra-smooth copper foils which are typically used as the negative electrodes in lithium-ion batteries. We first compared the electronic transport properties of our new graphene film with the one synthesized by using commonly used standard copper foils in chemical vapor deposition (CVD). We observed a stark improvement in the electrical performance of the transistors realized on our graphene films. To study the optical properties on large area, we transferred CVD based graphene to transparent flexible substrates using hot lamination method and performed large area optical scanning. We demonstrate the promise of our high quality graphene films for large areas with ∼400 cm 2 flexible optical modulators. We obtained a profound light modulation over a broad spectrum by using the fabricated large area transparent graphene supercapacitors and we compared the performance of our devices with the one based on graphene from standard copper. We propose that the copper foils used in the lithium-ion batteries could be used to obtain high-quality graphene at much lower-cost, with the improved performance of electrical transport and optical properties in the devices made from them

Inhomogeneous electronic structure probed by spin-echo experiments in the electron doped high-Tc superconductor Pr_{1.85}Ce_{0.15}CuO_{4-y}

63Cu nuclear magnetic resonance (NMR) spin-echo decay rate (T_2^{-1}) measurements are reported for the normal and superconducting states of a single crystal of Pr_{1.85}Ce_{0.15}CuO_{4-y} (PCCO) in a magnetic field B_0=9T over the temperature range 2K<T<200K. The spin-echo decay rate is temperature-dependent for T<55K, and has a substantial dependence on the radio frequency (rf) pulse parameters below T~25K. This dependence indicates that T_2^{-1} is strongly effected by a local magnetic field distribution that can be modified by the rf pulses, including ones that are not at the nuclear Larmor frequency. The low-temperature results are consistent with the formation of a static inhomogeneous electronic structure that couples to the rf fields of the pulses.Comment: 4 pages, 4 figure

Data quality problems in discrete event simulation of manufacturing operations

High-quality input data are a necessity for successful discrete event simulation (DES) applications, and there are available methodologies for data collection in DES projects. However, in contrast to standalone projects, using DES as a daily manufacturing engineering tool requires high-quality production data to be constantly available. In fact, there has been a major shift in the application of DES in manufacturing from production system design to daily operations, accompanied by a stream of research on automation of input data management and interoperability between data sources and simulation models. Unfortunately, this research stream rests on the assumption that the collected data are already of high quality,and there is a lack of in-depth understanding of simulation data quality problems from a practitioners’ perspective.Therefore, a multiple-case study within the automotive industry was used to provide empirical descriptions of simulation data quality problems, data production processes, and relations between these processes and simulation data quality problems. These empirical descriptions are necessary to extend the present knowledge on data quality in DES in a practical real-world manufacturing context, which is a prerequisite for developing practical solutions for solving data quality problems such as limited accessibility, lack of data on minor stoppages, and data sources not being designed for simulation. Further, the empirical and theoretical knowledge gained throughout the study was used to propose a set of practical guidelines that can support manufacturing companies in improving data quality in DES

A novel form of recessive limb girdle muscular dystrophy with mental retardation and abnormal expression of alpha-dystroglycan

Cataloged from PDF version of article.The limb girdle muscular dystrophies are a heterogeneous group of conditions characterized by proximal muscle weakness and disease onset ranging from infancy to adulthood. We report here eight patients from seven unrelated families affected by a novel and relatively mild form of autosomal recessive limb girdle muscular dystrophy (LGMD2) with onset in the first decade of life and characterized by severe mental retardation but normal brain imaging. Immunocytochemical studies revealed a significant selective reduction of α-dystroglycan expression in the muscle biopsies. Linkage analysis excluded known loci for both limb girdle muscular dystrophy and congenital muscular dystrophies in the consanguineous families. We consider that this represents a novel form of muscular dystrophy with associated brain involvement. The biochemical studies suggest that it may belong to the growing number of muscular dystrophies with abnormal expression of α-dystroglycan. © 2003 Published by Elsevier B.V