Dependence of band structure and carrier concentration of metallic (13, 13) and semiconducting (13, 0) single wall carbon nanotube on temperature

The electronic band structure, density of states (DOS) and carrier concentration of a (13,13) metallic and a (13,0) semiconducting Single Wall Carbon Nanotube (SWCNT) have been estimated and simulated by using the Fermi-Dirac distribution function. The energy dispersion E(k) relation for metallic SWCNT near the minimum energy is linear and the Fermi level was independent of temperature (T). On the other hand for semiconducting SWCNT the E(k) relation is parabolic. The normalized Fermi-Energy (EF – EC) in the nondegenerate regime is a weak (logarithmic) function of carrier concentration and varies linearly with T. In the degenerate condition, the Fermi level was independent of T and was a strong function of carrier concentration

Effect of Substrate Orientation on the Growth of Germanium Oxide in Dry Oxygen Ambience

The present investigation deals with the effect of substrate orientation effect on the growth of thermally oxidized Ge. The thermal oxidation was performed at temperature between 375 and 550°C in dry oxygen ambient under atmospheric pressure. The thickness of thermally oxidized Ge films was measured by spectroscopic ellipsometry and the chemical bonding structures were characterized by using x-ray photoelectron spectroscopy (XPS). No orientation dependence was observed for the oxidation at temperature of 375°C while for oxidation at 490 and 550°C, Ge oxidation and GeO desorption rate of (100) orientation yield higher rate than (111). The larger atomic space of (100) orientation explains the higher oxidation and desorption rate at Ge surface

Приклади завдань для позакласної роботи з інформатики у початковій школі

У статті коротко описана методика проведення позакласної роботи з інформатики у початковій школі

Effects of annealing conditions on the surface morphology and crystallinity of sputtered ZnO nano films

The effects of annealing parameters on crystallinity and surface morphology of RF sputtered zinc oxide nano films were investigated. The structure and morphology of the nano films were dependent on temperature, gas flow rate and time of annealing. The results from atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) showed smooth and uniform growth of c-axis orientation films with an average grain sizes from 10 to 30 nm. Increments of the annealing temperature from 400 to 800°C led to bigger grain size, better crystallinity and also increase of the surface roughness. Moreover, the results showed that the crystallinity was independent of the annealing time up to 40 min after starting the annealing process. Increase in the percentage of oxygen in the O/Ar (mixture of annealing gases) from 50% to 100% results in no changes in AFM results, but XRD revealed that the (100) peak intensity was decreased, the position of (002) peak was slightly shifted towards higher angle and FWHM of (002) peak was improved

Ultrasensitive and Highly Selective Graphene-Based Field-Effect Transistor Biosensor for Anti-Diuretic Hormone Detection

Nephrogenic diabetes insipidus (NDI), which can be congenital or acquired, results from the failure of the kidney to respond to the anti-diuretic hormone (ADH). This will lead to excessive water loss from the body in the form of urine. The kidney, therefore, has a crucial role in maintaining water balance and it is vital to restore this function in an artificial kidney. Herein, an ultrasensitive and highly selective aptameric graphene-based field-effect transistor (GFET) sensor for ADH detection was developed by directly immobilizing ADH-specific aptamer on a surface-modified suspended graphene channel. This direct immobilization of aptamer on the graphene surface is an attempt to mimic the functionality of collecting tube V 2 receptors in the ADH biosensor. This aptamer was then used as a probe to capture ADH peptide at the sensing area which leads to changes in the concentration of charge carriers in the graphene channel. The biosensor shows a significant increment in the relative change of current ratio from 5.76 to 22.60 with the increase of ADH concentration ranging from 10 ag/mL to 1 pg/mL. The ADH biosensor thus exhibits a sensitivity of 50.00 µA· ( g / mL ) − 1 with a limit of detection as low as 3.55 ag/mL. In specificity analysis, the ADH biosensor demonstrated a higher current value which is 338.64 µA for ADH-spiked in phosphate-buffered saline (PBS) and 557.89 µA for ADH-spiked in human serum in comparison with other biomolecules tested. This experimental evidence shows that the ADH biosensor is ultrasensitive and highly selective towards ADH in PBS buffer and ADH-spiked in human serum

Dielectrophoresis-based microfluidic platforms for cancer diagnostics

The recent advancement of dielectrophoresis (DEP)-enabled microfluidic platforms is opening new opportunities for potential use in cancer disease diagnostics. DEP is advantageous because of its specificity, low cost, small sample volume requirement, and tuneable property for microfluidic platforms. These intrinsic advantages have made it especially suitable for developing microfluidic cancer diagnostic platforms. This review focuses on a comprehensive analysis of the recent developments of DEP enabled microfluidic platforms sorted according to the target cancer cell. Each study is critically analyzed, and the features of each platform, the performance, added functionality for clinical use, and the types of samples, used are discussed. We address the novelty of the techniques, strategies, and design configuration used in improving on existing technologies or previous studies. A summary of comparing the developmental extent of each study is made, and we conclude with a treatment of future trends and a brief summary