Seismic evidence for significant melt beneath the Long Valley Caldera, California, USA

A little more than 760 ka ago, a supervolcano on the eastern edge of California (United States) underwent one of North America’s largest Quaternary explosive eruptions. Over this ~6-day-long eruption, pyroclastic flows blanketed the surrounding ~50 km with more than 1400 km3 of the now-iconic Bishop Tuff, with ashfall reaching as far east as Nebraska. Collapse of the volcano’s magma reservoir created the restless Long Valley Caldera. Although no rhyolitic eruptions have occurred in 100 k.y., beginning in 1978, ongoing uplift suggests new magma may have intruded into the reservoir. Alternatively, the reservoir could be approaching final crystallization, with present-day uplift related to the expulsion of fluid from the last vestiges of melt. Despite 40 years of diverse investigations, the presence of large volumes of melt in Long Valley’s magma reservoir remain unresolved. Here we show, through full waveform seismic tomography, a mid-crustal zone of low shear-wave velocity. We estimate the reservoir contains considerable quantities of melt, \u3e1000 km3, at melt fractions as high as ~27%. While supervolcanoes like Long Valley are rare, understanding the volume and concentration of melt in their magma reservoirs is critical for determining their potential hazard

A microfabricated physical sensor for atmospheric mercury monitoring,”

Abstract A new microfabricated physical sensor for elemental gaseous mercury (Hg 0 ) determinations has been developed and experimentally tested by the authors. Hg 0 represents 90-99% of atmospheric mercury forms. The sensor is based on the technique of resistivity variation of thin gold film, characterised by high selectivity and absence of optical parts. The sensor consists of four identical thin gold film resistors mounted in Wheatstone bridge configuration. Two resistors work as sensitive elements and the others as reference, in order to minimise the influence of temperature variation. The absorption of Hg 0 on the gold film produces a change in the resistivity of the amalgam. Far from the saturation, this change is proportional to the amount of the absorbed Hg 0 . The adsorption behaviour of the sensor deposited by sputtering on two different substrates (glass and Printed Circuit Board (PCB)) have been investigated. The sensors showed to work in a large range of linearity and need a low power during the regeneration process. Sensors on glass and PCB substrates underwent numerous regeneration cycles without inflicting any mechanical or electrical damages to the resistors. The presented experimental results describe the features of both sensors pointing out advantages and drawbacks of the used substrates. The PCB substrate seems to have more suitable characteristics for developing a new mercury 'smart' sensor

Strategies to develop radiomics and machine learning models for lung cancer stage and histology prediction using small data samples

Predictive models based on radiomics and machine-learning (ML) need large and annotated datasets for training, often difficult to collect. We designed an operative pipeline for model training to exploit data already available to the scientific community. The aim of this work was to explore the capability of radiomic features in predicting tumor histology and stage in patients with non-small cell lung cancer (NSCLC). We analyzed the radiotherapy planning thoracic CT scans of a proprietary sample of 47 subjects (L-RT) and integrated this dataset with a publicly available set of 130 patients from the MAASTRO NSCLC collection (Lung1). We implemented intra- and inter-sample cross-validation strategies (CV) for evaluating the ML predictive model performances with not so large datasets. We carried out two classification tasks: histology classification (3 classes) and overall stage classification (two classes: stage I and II). In the first task, the best performance was obtained by a Random Forest classifier, once the analysis has been restricted to stage I and II tumors of the Lung1 and L-RT merged dataset (AUC = 0.72 ± 0.11). For the overall stage classification, the best results were obtained when training on Lung1 and testing of L-RT dataset (AUC = 0.72 ± 0.04 for Random Forest and AUC = 0.84 ± 0.03 for linear-kernel Support Vector Machine). According to the classification task to be accomplished and to the heterogeneity of the available dataset(s), different CV strategies have to be explored and compared to make a robust assessment of the potential of a predictive model based on radiomics and ML

The effect of videokeratoscope faceplate design on radius of curvature maps

A computer model using finite ray tracing methods was developed to simulate a videokeratoscope analysing an average cornea. Different faceplate designs were tested using five points in the faceplate subtending angles between 15 and 75 in 15 intervals at the corneal vertex. Image quality was assessed by adding the geometrical blurs of the 5 image points. Differences (error) between accurate sagittal radius of curvature and sagittal radius of curvature calculated by the van Saarloos algorithm were calculated for selected surfaces at the same corneal points. The calculations were repeated for the tangential radius of curvature. Differences equal or bigger than 0.02 mm were regarded as clinically significant. The surface that provided the sharpest image for an average cornea was a cylinder with the base 120 mm away from the corneal vertex and a diameter of 26 mm. Changing the faceplate design results in clinically significant differences for an average cornea

Nonorographic generation of Arctic polar stratospheric clouds during

[1] During December 1999, polar stratospheric clouds (PSCs) were observed in the absence of conditions conducive to generation by topographic gravity waves. The possibility is explored that PSCs can be generated by inertia gravity waves (IGW) radiating from breaking synoptic-scale Rossby waves on the polar front jet. The aerosol features on 7 and 12 December are selected for comparison with theory and with simulations using the University of Wisconsin Nonhydrostatic Modeling System (UWNMS). Consistent with Rossby adjustment theory, a common feature in the UWNMS simulations is radiation of IGW from the tropopause polar front jet, especially from sectors which are evolving rapidly in the Rossby wave breaking process. Packets of gravity wave energy radiate upward and poleward into the cold pool, while individual wave crests propagate poleward and downward, causing mesoscale variations in vertical motion and temperature. On 12 December the eastbound DC-8 lidar observations exhibited a fairly uniform field of six waves in aerosol enhancement in the 14-20 km layer, consistent with vertical displacement by a field of IGW propagating antiparallel to the flow, with characteristic horizontal and vertical wavelengths of $300 and$10 km. UWNMS simulations show emanation of a field of IGW upward and southwestward from a northward incursion of the polar front jet. The orientation and evolution of the aerosol features on 7 December are consistent with a single PSC induced by an IGW packet propagating from a breaking Rossby wave over western Russia toward the northeast into the coldest part of the base of the polar vortex, with characteristic period $9 hours, vertical wavelength$12 km, and horizontal wavelength $1000 km. Linear theory shows that for both of these cases, IGW energy propagates upward at$1 km/hour and horizontally at $100 km/hour, with characteristic trace speed$30 m/s. The spatial orientation of the PSC along IGW phase lines is contrasted with the nearly horizontal filamentary structures in the PSC, which are indicative of flow streamlines. It is suggested that vertical displacement is a crucial factor in determining whether a PSC will form and that most PSCs are relatable to specific synoptic and mesoscale motions

Nonorographic generation of Arctic polar stratospheric clouds during

[1] During December 1999, polar stratospheric clouds (PSCs) were observed in the absence of conditions conducive to generation by topographic gravity waves. The possibility is explored that PSCs can be generated by inertia gravity waves (IGW) radiating from breaking synoptic-scale Rossby waves on the polar front jet. The aerosol features on 7 and 12 December are selected for comparison with theory and with simulations using the University of Wisconsin Nonhydrostatic Modeling System (UWNMS). Consistent with Rossby adjustment theory, a common feature in the UWNMS simulations is radiation of IGW from the tropopause polar front jet, especially from sectors which are evolving rapidly in the Rossby wave breaking process. Packets of gravity wave energy radiate upward and poleward into the cold pool, while individual wave crests propagate poleward and downward, causing mesoscale variations in vertical motion and temperature. On 12 December the eastbound DC-8 lidar observations exhibited a fairly uniform field of six waves in aerosol enhancement in the 14-20 km layer, consistent with vertical displacement by a field of IGW propagating antiparallel to the flow, with characteristic horizontal and vertical wavelengths of $300 and$10 km. UWNMS simulations show emanation of a field of IGW upward and southwestward from a northward incursion of the polar front jet. The orientation and evolution of the aerosol features on 7 December are consistent with a single PSC induced by an IGW packet propagating from a breaking Rossby wave over western Russia toward the northeast into the coldest part of the base of the polar vortex, with characteristic period $9 hours, vertical wavelength$12 km, and horizontal wavelength $1000 km. Linear theory shows that for both of these cases, IGW energy propagates upward at$1 km/hour and horizontally at $100 km/hour, with characteristic trace speed$30 m/s. The spatial orientation of the PSC along IGW phase lines is contrasted with the nearly horizontal filamentary structures in the PSC, which are indicative of flow streamlines. It is suggested that vertical displacement is a crucial factor in determining whether a PSC will form and that most PSCs are relatable to specific synoptic and mesoscale motions

Optimal functional outcome measures for assessing treatment for Dupuytren's disease: A systematic review and recommendations for future practice

This article is available through the Brunel Open Access Publishing Fund. Copyright © 2013 Ball et al.; licensee BioMed Central Ltd.Background: Dupuytren's disease of the hand is a common condition affecting the palmar fascia, resulting in progressive flexion deformities of the digits and hence limitation of hand function. The optimal treatment remains unclear as outcomes studies have used a variety of measures for assessment. Methods: A literature search was performed for all publications describing surgical treatment, percutaneous needle aponeurotomy or collagenase injection for primary or recurrent Dupuytren’s disease where outcomes had been monitored using functional measures. Results: Ninety-one studies met the inclusion criteria. Twenty-two studies reported outcomes using patient reported outcome measures (PROMs) ranging from validated questionnaires to self-reported measures for return to work and self-rated disability. The Disability of Arm, Shoulder and Hand (DASH) score was the most utilised patient-reported function measure (n=11). Patient satisfaction was reported by eighteen studies but no single method was used consistently. Range of movement was the most frequent physical measure and was reported in all 91 studies. However, the methods of measurement and reporting varied, with seventeen different techniques being used. Other physical measures included grip and pinch strength and sensibility, again with variations in measurement protocols. The mean follow-up time ranged from 2 weeks to 17 years. Conclusions: There is little consistency in the reporting of outcomes for interventions in patients with Dupuytren’s disease, making it impossible to compare the efficacy of different treatment modalities. Although there are limitations to the existing generic patient reported outcomes measures, a combination of these together with a disease-specific questionnaire, and physical measures of active and passive individual joint Range of movement (ROM), grip and sensibility using standardised protocols should be used for future outcomes studies. As Dupuytren’s disease tends to recur following treatment as well as extend to involve other areas of the hand, follow-up times should be standardised and designed to capture both short and long term outcomes

The Antioxidant Potential of the Mediterranean Diet in Patients at High Cardiovascular Risk: An In-Depth Review of the PREDIMED

Cardiovascular disease (CVD) is the leading global cause of death. Diet is known to be important in the prevention of CVD. The PREDIMED trial tested a relatively low-fat diet versus a high-fat Mediterranean diet (MedDiet) for the primary prevention of CVD. The resulting reduction of the CV composite outcome resulted in a paradigm shift in CV nutrition. Though many dietary factors likely contributed to this effect, this review focuses on the influence of the MedDiet on endogenous antioxidant systems and the effect of dietary polyphenols. Subgroup analysis of the PREDIMED trial revealed increased endogenous antioxidant and decreased pro-oxidant activity in the MedDiet groups. Moreover, higher polyphenol intake was associated with lower incidence of the primary outcome, overall mortality, blood pressure, inflammatory biomarkers, onset of new-onset type 2 diabetes mellitus (T2DM), and obesity. This suggests that polyphenols likely contributed to the lower incidence of the primary event in the MedDiet groups. In this article, we summarize the potential benefits of polyphenols found in the MedDiet, specifically the PREDIMED cohort. We also discuss the need for further research to confirm and expand the findings of the PREDIMED in a non-Mediterranean population and to determine the exact mechanisms of action of polyphenols

Multiarticular chronic tophaceous gout with severe and multiple ulcerations: a case report

<p>Abstract</p> <p>Introduction</p> <p>Gout is a common inflammatory arthritis caused by articular precipitation of monosodium urate crystals. It usually affects the first metatarsophalangeal joint of the foot and less commonly other joints, such as wrists, elbows, knees and ankles.</p> <p>Case presentation</p> <p>We report the case of a 75-year-old Caucasian man with tophaceous multiarticular gout, soft-tissue involvement and ulcerated tophi on the first metatarsophalangeal joint of the left foot, on the first interphalangeal joint of the right foot and on the left thumb.</p> <p>Conclusion</p> <p>Ulcers due to tophaceous gout are currently uncommon considering the positive effect of pharmaceutical treatment in controlling hyperuricemia. Surgical treatment is seldom required for gout and is usually reserved for cases of recurrent attacks with deformities, severe pain, infection and joint destruction.</p

Association of extent of cannabis use and psychotic like intoxication experiences in a multi-national sample of first episode psychosis patients and controls

BackgroundFirst episode psychosis (FEP) patients who use cannabis experience more frequent psychotic and euphoric intoxication experiences compared to controls. It is not clear whether this is consequent to patients being more vulnerable to the effects of cannabis use or to their heavier pattern of use. We aimed to determine whether extent of use predicted psychotic-like and euphoric intoxication experiences in patients and controls and whether this differs between groups.MethodsWe analysed data on patients who had ever used cannabis (n = 655) and controls who had ever used cannabis (n = 654) across 15 sites from six countries in the EU-GEI study (2010-2015). We used multiple regression to model predictors of cannabis-induced experiences and to determine if there was an interaction between caseness and extent of use.ResultsCaseness, frequency of cannabis use and money spent on cannabis predicted psychotic-like and euphoric experiences (p ≤ 0.001). For psychotic-like experiences (PEs) there was a significant interaction for caseness × frequency of use (p &lt; 0.001) and caseness × money spent on cannabis (p = 0.001) such that FEP patients had increased experiences at increased levels of use compared to controls. There was no significant interaction for euphoric experiences (p &gt; 0.5).ConclusionsFEP patients are particularly sensitive to increased psychotic-like, but not euphoric experiences, at higher levels of cannabis use compared to controls. This suggests a specific psychotomimetic response in FEP patients related to heavy cannabis use. Clinicians should enquire regarding cannabis related PEs and advise that lower levels of cannabis use are associated with less frequent PEs