1,217 research outputs found
Filament wound container Patent
Development of foam insulation for filament wound cryogenic storage tan
A new method for fabrication of flexible vacuum purge jackets
Polyurethane-coated synthetic fabric is fitted with a filament-glass mat exterior which gives it a high degree of springback ability. Material is capable of maintaining its springback capability in a temperature range from ambient to cryogenic
Method of making a filament-wound container Patent
Fabrication of filament wound propellant tank for cryogenic storag
Self-energized plasma compressor
The self-energized plasma compressor is described which compresses plasma discharged from a coaxial plasma generator. The device includes a helically shaped coil which is coaxially aligned with the center axis of the coaxial plasma generator. The plasma generator creates a current through the helical coil which, in turn, generates a time varying magnetic field that creates a force which acts radially upon the plasma. The coaxial plasma generator and helical coil move the plasma under high pressure and temperature to the narrow end of the coil. Positioned adjacent to the narrow end of the coil are beads which are engaged by the plasma to be accelerated to hypervelocities for simulating meteoroids
Magnetogasdynamic compression of a coaxial plasma accelerator flow for micrometeoroid simulation
A new configuration of a coaxial plasma accelerator with self-energized magnetic compressor coil attached is described. It is shown that the circuit may be treated theoretically by analyzing an equivalent circuit mesh. The results obtained from the theoretical analysis compare favorably with the results measured experimentally. Using this accelerator configuration, glass beads of 125 micron diameter were accelerated to velocities as high as 11 kilometers per second, while 700 micron diameter glass beads were accelerated to velocities as high as 5 kilometers per second. The velocities are within the hypervelocity regime of meteoroids
Design and fabrication of an internally insulated filament wound liquid hydrogen propellant tank
Internally insulated filament wound liquid hydrogen propellant tank
Investigation of fabrication and processing parameters associated with use of polyurethane foams in sealed cryogenic insulation Final report
Fabrication and processing of polyurethane foams and vapor barrier foam seal material for sealed cryogenic insulation
Irradiation Enhanced Decomposition Of A Nickel-carbon Solid Solution
This investigation was performed to determine the effects of room temperature neutron irradiation on the distribution of carbon in a nickel-0.3 wt.% carbon alloy. The experiment consisted of comparing the amount of carbon in solid solution and the internal stresses of both unirradiated and irradiated (1013 fn-cm-2 \u3c ΦF \u3c 1018 fn-cm-2) samples following isochronal anneals between 100 and 1200°C by using the magnetic Dis accommodation technique. The results indicate that the amount of carbon remaining in solid solution decreases with increasing neutron dose. At temperatures below 200°C this is due to the trapping of carbon by mobile irradiation-produced defects. Between 200 and 600°C the formation of metastable carbides is enhanced by the presence of irradiation-produced defects. No differences are observed in irradiated and unirradiated samples above 600°C. © 1972
Biology and Management of Soybean Charcoal Rot
In the 2003 growing season, charcoal rot, a disease new to Iowa producers, was prevalent in the soybean fields of Iowa. This was the first ever statewide occurrence in Iowa with severe damage to many soybean fields. In the south, this disease has been a yield robber and has drastically reduced the yield potential by as mush as the sudden death syndrome. This article will discuss the following aspects of this disease: l) the distribution and economic importance of the pathogen; 2) identification of the disease; 3) the disease cycle and epidemiology; 4) yield loss assessment and 5) management strategies
- …