Low Complexity Decoding for Higher Order Punctured Trellis-Coded Modulation Over Intersymbol Interference Channels

Trellis-coded modulation (TCM) is a power and bandwidth efficient digital transmission scheme which offers very low structural delay of the data stream. Classical TCM uses a signal constellation of twice the cardinality compared to an uncoded transmission with one bit of redundancy per PAM symbol, i.e., application of codes with rates $\frac{n-1}{n}$ when $2^{n}$ denotes the cardinality of the signal constellation. Recently published work allows rate adjustment for TCM by means of puncturing the convolutional code (CC) on which a TCM scheme is based on. In this paper it is shown how punctured TCM-signals transmitted over intersymbol interference (ISI) channels can favorably be decoded. Significant complexity reductions at only minor performance loss can be achieved by means of reduced state sequence estimation.Comment: 4 pages, 5 figures, 3 algorithms, accepted and published at 6th International Symposium on Communications, Control, and Signal Processing (ISCCSP 2014

Low Complexity Decoding for Punctured Trellis-Coded Modulation Over Intersymbol Interference Channels

Classical trellis-coded modulation (TCM) as introduced by Ungerboeck in 1976/1983 uses a signal constellation of twice the cardinality compared to an uncoded transmission with one bit of redundancy per PAM symbol, i.e., application of codes with rates $\frac{n-1}{n}$ when $2^{n}$ denotes the cardinality of the signal constellation. The original approach therefore only comprises integer transmission rates, i.e., $R=\left\{ 2,\,3,\,4\,\ldots \right\}$, additionally, when transmitting over an intersymbol interference (ISI) channel an optimum decoding scheme would perform equalization and decoding of the channel code jointly. In this paper, we allow rate adjustment for TCM by means of puncturing the convolutional code (CC) on which a TCM scheme is based on. In this case a nontrivial mapping of the output symbols of the CC to signal points results in a time-variant trellis. We propose an efficient technique to integrate an ISI-channel into this trellis and show that the computational complexity can be significantly reduced by means of a reduced state sequence estimation (RSSE) algorithm for time-variant trellises.Comment: 4 pages, 7 pictured, accepted for 2014 International Zurich Seminar on Communication

The thermal power of aluminum nitride at temperatures between 1350 and 1650 deg C in argon and nitrogen atmospheres

The test apparatus for measuring the thermal voltage of aluminum nitride for temperature differences of up to + or - 60 C between 1350 and 1650 C is described. The thermal power and its homogeneous proportion are determined and the heat transfer of the migration ions resulting from the homogeneous thermal power is calculated. The conduction mechanism in aluminum nitride is discussed

Punctured Trellis-Coded Modulation

In classic trellis-coded modulation (TCM) signal constellations of twice the cardinality are applied when compared to an uncoded transmission enabling transmission of one bit of redundancy per PAM-symbol, i.e., rates of $\frac{K}{K+1}$ when $2^{K+1}$ denotes the cardinality of the signal constellation. In order to support different rates, multi-dimensional (i.e., $\mathcal{D}$-dimensional) constellations had been proposed by means of combining subsequent one- or two-dimensional modulation steps, resulting in TCM-schemes with $\frac{1}{\mathcal{D}}$ bit redundancy per real dimension. In contrast, in this paper we propose to perform rate adjustment for TCM by means of puncturing the convolutional code (CC) on which a TCM-scheme is based on. It is shown, that due to the nontrivial mapping of the output symbols of the CC to signal points in the case of puncturing, a modification of the corresponding Viterbi-decoder algorithm and an optimization of the CC and the puncturing scheme are necessary.Comment: 5 pages, 10 figures, submitted to IEEE International Symposium on Information Theory 2013 (ISIT

Observations of the Biology of \u3ci\u3ePhasgonophora Sulcata\u3c/i\u3e (Hymenoptera: Chalcididae), a Larval Parasitoid of the Twolined Chestnut Borer, \u3ci\u3eAgrilus Bilineatus\u3c/i\u3e (Coleoptera: Buprestidae), in Wisconsin

Phasgorzophora sulcata Westwood was the principal larval parasitoid of Agrilus bilineatus (Weber) during a study conducted in a natural oak-hardwood forest in the Kettle Moraine State Forest, Jefferson County, Wisconsin. Mean percent larval parasitism was 10.5%. Mean A. bilineatus and P. sulcata densities were, respectively, 53.0 and 6.1 adults per square meter of bark. The theoretical developmental threshold temperatures for over- wintering A. bilineatus and P. sulcata larvae were 17.8 and 19.l0C, respectively. The peak flight period of P. sulcata (9 July 1980) occurred ca. 3 weeks after the A. bilineatus peak flight (18 June 1980) at about the time of peak A. bilineatus egg eclosion. The P. sulcata sex ratios (malexfemales) for laboratory-reared and field-captured adults were 1:1.35 and 1:3.22, respectively

Search for sdB/WD pulsators in the Kepler FOV

In this article we present the preliminary results of an observational search for subdwarf B and white dwarf pulsators in the Kepler field of view, performed using the DOLORES camera attached to the 3.6m Telescopio Nazionale Galileo (TNG).Comment: Communications in Asteroseismology, in press; 2 pages, 1 figur

Baseline tests of the C. H. Waterman DAF electric passenger vehicle

An electric vehicle was tested as part of an Energy Research Development Administration (ERDA) project to characterize the state-of-the-art of electric vehicles. The Waterman vehicle performance test results are presented in this report. The vehicle is a converted four-passenger DAF 46 sedan. It is powered by sixteen 6-volt traction batteries through a three-step contactor controller actuated by a foot throttle to change the voltage applied to the 6.7 kW motor. The braking system is a conventional hydraulic braking system

Dynamic masses for the close PG1159 binary SDSSJ212531.92-010745.9

SDSSJ212531.92-010745.9 is the first known PG1159 star in a close binary with a late main sequence companion allowing a dynamical mass determination. The system shows flux variations with a peak-to-peak amplitude of about 0.7 mag and a period of about 6.96h. In August 2007, 13 spectra of SDSSJ212531.92-010745.9 covering the full orbital phase range were taken at the TWIN 3.5m telescope at the Calar Alto Observatory (Alm\'{e}ria, Spain). These confirm the typical PG1159 features seen in the SDSS discovery spectrum, together with the Balmer series of hydrogen in emission (plus other emission lines), interpreted as signature of the companion's irradiated side. A radial velocity curve was obtained for both components. Using co-added radial-velocity-corrected spectra, the spectral analysis of the PG1159 star is being refined. The system's lightcurve, obtained during three seasons of photometry with the G\"ottingen 50cm and T\"ubingen 80cm telescopes, was fitted with both the NIGHTFALL and PHOEBE binary simulation programs. An accurate mass determination of the PG1159 component from the radial velocity measurements requires to first derive the inclination, which requires light curve modelling and yields further constraints on radii, effective temperature and separation of the system's components. From the analysis of all data available so far, we present the possible mass range for the PG1159 component of SDSSJ212531.92-010745.9.Comment: 8 pages, in "White dwarfs", proceedings of the 16th European White Dwarf Workshop, eds. E. Garcia-Berro, M. Hernanz, J. Isern, S. Torres, to be published in J. Phys.: Conf. Se

Large-scale Quality Control of Cardiac Imaging in Population Studies: Application to UK Biobank

In large population studies such as the UK Biobank (UKBB), quality control of the acquired images by visual assessment is unfeasible. In this paper, we apply a recently developed fully-automated quality control pipeline for cardiac MR (CMR) images to the first 19,265 short-axis (SA) cine stacks from the UKBB. We present the results for the three estimated quality metrics (heart coverage, inter-slice motion and image contrast in the cardiac region) as well as their potential associations with factors including acquisition details and subject-related phenotypes. Up to 14.2% of the analysed SA stacks had sub-optimal coverage (i.e. missing basal and/or apical slices), however most of them were limited to the first year of acquisition. Up to 16% of the stacks were affected by noticeable inter-slice motion (i.e. average inter-slice misalignment greater than 3.4 mm). Inter-slice motion was positively correlated with weight and body surface area. Only 2.1% of the stacks had an average end-diastolic cardiac image contrast below 30% of the dynamic range. These findings will be highly valuable for both the scientists involved in UKBB CMR acquisition and for the ones who use the dataset for research purposes