Bi2Te3Bi_2Te_3: Implications of the rhombohedral k-space texture on the evaluation of the in-plane/out-of-plane conductivity anisotropy

Different computational scheme for calculating surface integrals in anisotropic Brillouin zones are compared. The example of the transport distribution function (plasma frequency) of the thermoelectric Material \BiTe near the band edges will be discussed. The layered structure of the material together with the rhombohedral symmetry causes a strong anisotropy of the transport distribution function for the directions in the basal (in-plane) and perpendicular to the basal plane (out-of-plane). It is shown that a thorough reciprocal space integration is necessary to reproduce the in-plane/out-of-plane anisotropy. A quantitative comparison can be made at the band edges, where the transport anisotropy is given in terms of the anisotropic mass tensor.Comment: 7 pages, 6 figs., subm. to J. Phys. Cond. Ma

A dry and fully dispersible bacterial cellulose formulation as a stabilizer for oil-in-water emulsions

Supplementary material related to this article can be found, in theonline version, at: doi:https://doi.org/10.1016/j.carbpol.2019.115657Bacterial cellulose (BC) is an emerging alternative to plant cellulose in different applications. Several works demonstrated the potential of never-dried BC; however, envisioning real industrial applications, a dry product retaining its functional properties upon rehydration is preferable. A dry and completely redispersible formulation of BC with carboxymethyl cellulose (CMC) was prepared by Spray-drying. The obtained material showed a Zeta Potential of (-67.0±3.9) mV, a Dv(50) of (601±19.7) µm and was able to decrease the oil/water interface energy. The dry BC:CMC formulation was employed as stabilizer in oil-in-water emulsions, in parallel with commercial plant celluloses and Xanthan gum. The emulsions were monitored over time by optical microscopy and characterized by rheological measurements. BC:CMC effectively stabilized emulsions against coalescence and creaming, at a concentration of 0.50 % - contrarily to other commercial dry celluloses due to the Pickering effect and to the structuring of the continuous phase, as seen with Cryo-SEM.This study was supported by the Portuguese Foundation for Scienceand Technology (FCT) under the scope of the strategic funding of UID/BIO/04469 unit, COMPETE 2020 (POCI-01-0145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund (ERDF) under the scope of Norte2020. FCT also supported this work by funding UID/EQU/00511/2019 unit, Project POCI-01-0145-FEDER-028715 funded by FEDER funds through COMPETE 2020 and by national funds (PIDDAC) throughFCT/MCTES, and Project NORTE-01-0145-FEDER-000005, funded by ERDF under the scope of NORTE 2020. The authors also acknowledgeFCT for the PhD scholarship SFRH/BD/115917/2016 (Daniela Martins) and for the contract based on “Lei do Emprego Científico” (DL 57/2016) (Berta Estevinho).info:eu-repo/semantics/publishedVersio

The Flexure-based Microgap Rheometer (FMR)

Submitted to J. Rheol.We describe the design and construction of a new microrheometer designed to facilitate the viscometric study of complex fluids with very small sample volumes (1-10 μl)and gaps of micrometer dimensions. The Flexure-based Microgap Rheometer (FMR) is a shear-rate-controlled device capable of measuring the shear stress in a plane Couette configuration with directly-controlled gaps between 1 μm and 200 μm. White light interferometry and a three-point nanopositioning stage using piezo-stepping motors are used to control the parallelism of the upper and lower shearing surfaces which are constructed from glass optical flats. A compound flexure system is used to hold the fluid sample testing unit between a drive spring connected to an ‘inchworm’ motor and an independent sensor spring. Displacements in the sensing flexure are detected using an inductive proximity sensor. Ready optical access to the transparent shearing surfaces enables monitoring of the structural evolution in the gap with a long working-distance video-microscope. This configuration then allows us to determine the microgap-dependent flow behavior of complex fluids over 5 decades of shear rate. We demonstrate the capability of the FMR by characterizing the complex stress and gap dependent flow behavior of a typical microstructured food product (mayonnaise) over the range of gaps from 8 to 100 μm and stresses from 10 to 1500 Pa. We correlate the gap-dependent rheological response to the microstructure of the emulsion and changes induced in the material by prolonged shearing.Dupont MIT Allianc

Needs assessment to strengthen capacity in water and sanitation research in Africa:experiences of the African SNOWS consortium

Despite its contribution to global disease burden, diarrhoeal disease is still a relatively neglected area for research funding, especially in low-income country settings. The SNOWS consortium (Scientists Networked for Outcomes from Water and Sanitation) is funded by the Wellcome Trust under an initiative to build the necessary research skills in Africa. This paper focuses on the research training needs of the consortium as identified during the first three years of the project

Independent policy learning: Contextual diffusion of active labour market policies

This chapter analyses in which ways diffusion based on interdependent policy learning explains the spread of active labour market policies (ALMP) in the OECD countries. By applying error correction models using multiplicative spatial Prais-Winsten regressions for analyzing the diffusion of ALMPs in 22 OECD countries from 1991–2013, we find evidence of governments adapting labour market policy strategies that have proven successful, that is, perform well in increasing labour market participation in other countries. However, interdependent learning is conditional on the institutional framework: policymakers rather learn from the experience of other countries in the same welfare regime. Even more importantly, the results bear witness to the importance of the European Employment Strategy (EES) as an international coordination framework facilitating policy learning

Ceramic Water Filter for Point-Of-Use Water Treatment in Developing Countries: Principles, Challenges and Opportunities

Drinking water source contamination poses a great threat to human health in developing countries. Point-of-use (POU) water treatment techniques, which improve drinking water quality at the household level, offer an affordable and convenient way to obtain safe drinking water and thus can reduce the outbreaks of waterborne diseases. Ceramic water filters (CWFs), fabricated from locally sourced materials and manufactured by local labor, are one of the most socially acceptable POU water treatment technologies because of their effectiveness, low-cost and ease of use. This review concisely summarizes the critical factors that influence the performance of CWFs, including (1) CWF manufacturing process (raw material selection, firing process, silver impregnation), and (2) source water quality. Then, an in-depth discussion is presented with emphasis on key research efforts to address two major challenges of conventional CWFs, including (1) simultaneous increase of filter flow rate and bacterial removal efficiency, and (2) removal of various concerning pollutants, such as viruses and metal(loid)s. To promote the application of CWFs, future research directions can focus on: (1) investigation of pore size distribution and pore structure to achieve higher flow rates and effective pathogen removal by elucidating pathogen transport in porous ceramic and adjusting manufacture parameters; and (2) exploration of new surface modification approaches with enhanced interaction between a variety of contaminants and ceramic surfaces

Welfare Reform, Precarity and the Re-Commodification of Labour

While welfare reform matters for workers and workplaces, it is peripheral in English-language sociology of work and industrial relations research. This article’s core proposition is that active labour market policies (ALMPs) are altering the institutional constitution of the labour market by intensifying market discipline within the workforce. This re-commodification effect is specified drawing on Marxism, comparative institutionalism, German-language sociology, and English-language social policy analysis. Because of administrative failures and employer discrimination, however, ALMPs may worsen precarity without achieving the stated goal of increasing labour-market participation