8,564 research outputs found
Assessment of free-living nitrogen fixing microorganisms for commercial nitrogen fixation
Ammonia production by Klebsiella pneumoniae is not economical with present strains and improving nitrogen fixation to its theoretical limits in this organism is not sufficient to achieve economic viability. Because the value of both the hydrogen produced by this organism and the methane value of the carbon source required greatly exceed the value of the ammonia formed, ammonia (fixed nitrogen) should be considered the by-product. The production of hydrogen by KLEBSIELLA or other anaerobic nitrogen fixers should receive additional study, because the activity of nitrogenase offers a significant improvement in hydrogen production. The production of fixed nitrogen in the form of cell mass by Azotobacter is also uneconomical and the methane value of the carbon substrate exceeds the value of the nitrogen fixed. Parametric studies indicate that as efficiencies approach the theoretical limits the economics may become competitive. The use of nif-derepressed microorganisms, particularly blue-green algae, may have significant potential for in situ fertilization in the environment
The development of an unconventional food regeneration process: Quantifying the nutritional components of a model methylotrophic yeast
A hybrid chemical/biological approach to unconventional food regeneration is discussed. Carbon dioxide and water, the major wastes of human metabolism would be converted to methanol by one of several physiochemical processes available (thermal, photocatalytic, etc.). Methanol is then used to supply carbon and energy for the culture of microorganisms which in turn produce biological useful basic food stuffs for human nutrition. Our work has focused on increasing the carbohydrate levels of a candidate methylotrophic yeast to more nearly coincide with human nutritional requirements. Yeasts were chosen due to their high carbohydrate levels compared to bacteria and their present familiarity in the human diet. The initial candidate yeast studied was a thermotolerant strain of Hansenula polymor pha, DL-1. The quantitative results that permit an evaluation of the overall efficiency in hybrid chemical/biological food production schemes are discussed. A preliminary evaluation of the overall efficiency of such schemes is also discussed
Thin-film flow in helically wound rectangular channels with small torsion
Laminar gravity-driven thin-film flow down a helically-wound channel of rectangular cross-section with small torsion in which the fluid depth is small is considered. Neglecting the entrance and exit regions we obtain the steady-state solution that is independent of position along the axis of the channel, so that the flow, which comprises a primary flow in the direction of the axis of the channel and a secondary flow in the cross-sectional plane, depends only on position in the two-dimensional cross-section of the channel. A thin-film approximation yields explicit expressions for the fluid velocity and pressure in terms of the free-surface shape, the latter satisfying a non-linear ordinary differential equation that has a simple exact solution in the special case of a channel of rectangular cross-section. The predictions of the thin-film model are shown to be in good agreement with much more computationally intensive solutions of the small-helix-torsion Navier–Stokes equations. The present work has particular relevance to spiral particle separators used in the mineral-processing industry. The validity of an assumption commonly used in modelling flow in spiral separators, namely that the flow in the outer region of the separator cross-section is described by a free vortex, is shown to depend on the problem parameters
An electromechanical attenuator/actuator for Space Station docking
The development of a docking system for aerospace vehicles has identified the need for reusable and variably controlled attenuators/actuators for energy absorption and compliance. One approach to providing both the attenuator and the actuator functions is by way of an electromechanical attenuator/actuator (EMAA) as opposed to a hydraulic system. The use of the electromechanical devices is considered to be more suitable for a space environment because of the absence of contamination from hydraulic fluid leaks and because of the cost effectiveness of maintenance. A smart EMAA that uses range/rate/attitude sensor information to preadjust a docking interface to eliminate misalignments and to minimize contact and stroking forces is described. A prototype EMAA was fabricated and is being tested and evaluated. Results of preliminary testing and analysis already performed have established confidence that this concept is feasible and will provide the desired reliability and low maintenance for repetitive long term operation typical of Space Station requirements
Standard comparison test procedures for initiator output
Standard test procedures for initiators of explosive device
Ion transport by the cortical and outer medullary collecting tubule
Anatomy and cell morphology. The rabbit collecting tubule originates near the surface of the kidney, descends through the cortex within the medullary rays and traverses the outer medulla as an unbranched structure. The cortical collecting tubule (CCT) receives the contents of an average of 6 nephrons [1]. The fusion of these nephrons generally occurs proximal to the origins of the collecting tubule. Thus, the collecting tubule is unbranched from the superficial portion of the cortex until it reaches the inner medulla where the collecting tubules begin to fuse to form larger and larger ducts eventually exiting through the papillary tip. Figure 1 schematically represents the collecting tubule as it courses through the cortex and medulla. The fact that the cortical and outer medullary collecting tubule (OMCT) in the rabbit are unbranched facilitates their examination using the technique of in vitro perfusion of isolated nephron segments
Rehabilitation interventions for foot drop in neuromuscular disease
"Foot drop" or "Floppy foot drop" is the term commonly used to describe weakness or contracture of the muscles around the ankle joint. It may arise from many neuromuscular diseases
- …