On Monin-Obukhov similarity in the stable atmospheric boudary layer

Atmospheric measurements from several field experiments have been combined to develop a better understanding of the turbulence structure of the stable atmospheric boundary layer. Fast response wind velocity and temperature data have been recorded using 3-dimensional sonic anemometers, placed at several heights (≈ 1 m to 4.3 m) above the ground. The measurements were used to calculate the standard deviations of the three components of the wind velocity, temperature, turbulent kinetic energy (TKE) dissipation and temperature variance dissipation. These data were normalized and plotted according to Monin–Obukhov similarity theory. The non-dimensional turbulence statistics have been computed, in part, to investigate the general applicability of the concept of z-less stratification for stable conditions. From the analysis of a data set covering almost five orders of magnitude in the stability parameter ζ = z/L (from near-neutral to very stable atmospheric stability), it was found that this concept does not hold in general. It was only for the non-dimensional standard deviation of temperature and the average dissipation rate of turbulent kinetic energy that zless behaviour has been found. The other variables studied here (non-dimensional standard deviations of u, v, and w velocity components and dissipation of temperature variance) did not follow the concept of z-less stratification for the very stable atmospheric boundary layer. An imbalance between production and dissipation of TKE was found for the near-neutral limit approached from the stable regime, which matches with previous results for near-neutral stability approached from the unstable regime

An Integrated Approach to Assess the Water Efficiency of Introducing Best Management Practices: An Application to Sugarcane Mechanisation in Brazil

Management practices reputed to be the best are being introduced widely in the agricultural sector. The identification of what these best management practices are for a given cultivation area requires thorough assessment, using indicators that reduce the risk of unintended impacts and that help manage environmental and economic trade-offs. We propose an integrated assessment that includes two indicators in water footprint sustainability assessment: water apparent productivity and ecosystem services value, thereby considering the trade-offs in the two ecosystem services of water provisioning and erosion potential. The approach was tested in Mogí-Guaçú Pardo (Brazil), a basin that has been subjected to intensive land-use changes through the expansion of sugarcane plantations. Here, regulatory changes have also promoted the introduction of the new management practice of mechanised harvesting, thereby phasing out the practice of burning the fields before manual harvest. A probabilistic approach was applied to account for uncertainty in model parameters. The results reveal that sugarcane has a comparably high economic value but is a less efficient land-use type from a water-use perspective. The total green and blue water footprint in the basin increased by 12% from 2000 to 2012, mainly due to the increase in sugarcane area (+36%). The intensification in sugarcane harvesting practices led to improved economic water-use efficiency and also lowered erosion costs. Adding the new indicators and considering trade-offs linked to new management practices and/or land-use changes allow for more robust decision making

Atmospheric stability effect on subgrid scale physics for large-eddy simulation

Field measurements in the atmospheric boundary layer were carried out to identify the effect of atmospheric stability on subgrid-scale physics for large-eddy simulation. The basic instrumentation setup consisted of 12 three-dimensional sonic anemometers arranged in two parallel horizontal arrays (seven sensors in the lower array and five sensors in the upper array). Data from this setup are used to compute the subgrid-scale (SGS) heat fluxes and SGS dissipation of the temperature variance under stable and unstable stability conditions. The relative contribution of the SGS vertical flux to the total turbulent flux increases when going from unstable to stable conditions. The relative importance of negative SGS dissipation (backscatter) events becomes larger under stable conditions. The model coefficients for two well-known SGS models (eddy-viscosity and non-linear) are computed. Model coefficients are found to depend strongly on stability. Under both stable and unstable conditions, large negative SGS dissipation is associated with the onset of ejection events while large positive SGS dissipation tends to occur during the onset of sweep events. These findings are also supported by conditionally sampled 2D velocity and temperature fields obtained using the 12 anemometers placed in a vertical array

Atmospheric boundary-layer structure observed during a haze event due to forest-fire smoke

During a haze event in Baltimore, U.S.A. from July 6 to 8, 2002, smoke from forest fires in the Québec region (Canada), degraded air quality and impacted upon local climate, decreasing solar radiation and air temperature. The smoke particles in and above the atmospheric boundary layer (ABL) served as a tracer and provided a unique opportunity to investigate the ABL structure, especially entrainment. Elastic backscatter lidar measurements taken during the haze event distinctly reveal the downward sweeps (or wisps) of smoke-laden air from the free atmosphere into the ABL. Visualisations of mechanisms such as dry convection, the entrainment process, detrainment, coherent entrainment structures, and mixing inside the ABL, are presented. Thermals overshooting at the ABL top are shown to create disturbances in the form of gravity waves in the free atmosphere aloft, as evidenced by a corresponding ripple structure at the bottom of the smoke layer. Lidar data, aerosol groundbased measurements and supporting meteorological data are used to link free atmosphere, mixed-layer and ground-level aerosols. During the peak period of the haze event (July 7, 2002), the correlation between time series of elastic backscatter lidar data within the mixed layer and the scattering coefficient from a nephelometer at ground level was found to be high (R ¼ 0.96 for z ¼ 324 m, and R ¼ 0.89 for z ¼ 504 m). Ground-level aerosol concentration was at a maximum about 2 h after the smoke layer intersected with the growing ABL, confirming that the wisps do not initially reach the ground

Aerosol optical characterization by nephelometer and lidar: the Baltimore Supersite experiment during the Canadian forest fire smoke intrusion

[1] High spatial and temporal resolution elastic backscatter lidar data from Baltimore are analyzed with a near-end approach to estimate vertical profiles of the aerosol extinction coefficient. The near-end approach makes use of the (1) aerosol scattering coefficient measured at the surface with a nephelometer (0.530 μm), (2) surface level particle size distribution, and (3) refractive index calculated using Mie theory to estimate the aerosol extinction coefficient boundary condition for the lidar equation. There was a broad range of atmospheric turbidity due to a strong haze event, which occurred because of smoke transport from Canadian forest fires, and led to a wide range of observed atmospheric properties. The index of refraction for aerosols estimated during the entire study period is 1.5–0.47 i, which is typical for soot. The measured surface level aerosol scattering coefficient ranged from σp = 0.002 to σp = 0.541 km−1, and the computed aerosol extinction coefficient spanned values κp = 0.01 to κp = 1.05 km−1. The derived mass concentration and the mass scattering ranges were 3.96–194 μg m−3 and 0.05–3.260 m2g−1, respectively. The aerosol optical properties were dominated by light absorption by soot

Revisiting the Local Scaling Hypothesis in Stably Stratified Atmospheric Boundary Layer Turbulence: an Integration of Field and Laboratory Measurements with Large-eddy Simulations

The `local scaling' hypothesis, first introduced by Nieuwstadt two decades ago, describes the turbulence structure of stable boundary layers in a very succinct way and is an integral part of numerous local closure-based numerical weather prediction models. However, the validity of this hypothesis under very stable conditions is a subject of on-going debate. In this work, we attempt to address this controversial issue by performing extensive analyses of turbulence data from several field campaigns, wind-tunnel experiments and large-eddy simulations. Wide range of stabilities, diverse field conditions and a comprehensive set of turbulence statistics make this study distinct

Application of the Kano-Hamilton Multiangle Inversion Method in Clear Atmospheres

An improved measurement methodology and a data-processing technique for multiangle data obtained with an elastic scanning lidar in clear atmospheres are introduced. Azimuthal and slope scans are combined to reduce the atmospheric heterogeneity. Vertical profiles of optical depth and intercept (proportional to the logarithm of the backscatter coefficient) are determined. The purpose of this approach is to identify and remove data points that distort the regression analysis results in order to improve the accuracy of the retrieved optical depth and of the intercept. In addition, the influence of systematic distortions has been investigated. Furthermore, profiles of the optical depth, intercept, and the range-squared-corrected signals have been used to determine the lidar overlap function as a function of range. Simulation and experimental results of this data-processing technique are presented

Turbulent flow at 190 m height above London during 2006-2008: A climatology and the applicability of similarity theory

Flow and turbulence above urban terrain is more complex than above rural terrain, due to the different momentum and heat transfer characteristics that are affected by the presence of buildings (e.g. pressure variations around buildings). The applicability of similarity theory (as developed over rural terrain) is tested using observations of flow from a sonic anemometer located at 190.3 m height in London, U.K. using about 6500 h of data. Turbulence statistics—dimensionless wind speed and temperature, standard deviations and correlation coefficients for momentum and heat transfer—were analysed in three ways. First, turbulence statistics were plotted as a function only of a local stability parameter z/Λ (where Λ is the local Obukhov length and z is the height above ground); the σ_i/u_* values (i = u, v, w) for neutral conditions are 2.3, 1.85 and 1.35 respectively, similar to canonical values. Second, analysis of urban mixed-layer formulations during daytime convective conditions over London was undertaken, showing that atmospheric turbulence at high altitude over large cities might not behave dissimilarly from that over rural terrain. Third, correlation coefficients for heat and momentum were analyzed with respect to local stability. The results give confidence in using the framework of local similarity for turbulence measured over London, and perhaps other cities. However, the following caveats for our data are worth noting: (i) the terrain is reasonably flat, (ii) building heights vary little over a large area, and (iii) the sensor height is above the mean roughness sublayer depth