Middle Atmosphere Program. Handbook for MAP. Volume 16: Atmospheric Structure and Its Variation in the Region 20 to 120 Km. Draft of a New Reference Middle Atmosphere

A draft of a new reference atmosphere for the region between 20 and 80 km which depends largely on recent satellite experiments covering the globe from 80 deg S to 80 deg N is given. A separate international tropical reference atmosphere is given, as well as reference ozone models for the middle atmosphere

Silicon film solar cell process

The most promising way to reduce the cost of silicon in solar cells while still maintaining performance is to utilize thin films (10 to 20 microns thick) of crystalline silicon. The method of solution growth is being employed to grow thin polycrystalline films of silicon on dissimilar substrates. The initial results indicate that, using tin as the solvent, this growth process only requires operating temperatures in the range of 800 C to 1000 C. Growth rates in the range of 0.4 to 2.0 microns per minute and grain sizes in the range of 20 to 100 microns were achieved on both quartz and coated steel substrates. Typically, an aspect ratio of two to three between the width and the Si grain thickness is seen. Uniform coverage of Si growth on quartz over a 2.5 x 2.5 cm area was observed

GaAsP on GaP top solar cells

GaAsP on GaP top solar cells as an attachment to silicon bottom solar cells are being developed. The GaAsP on GaP system offers several advantages for this top solar cell. The most important is that the gallium phosphide substrate provides a rugged, transparent mechanical substrate which does not have to be removed or thinned during processing. Additional advantages are that: (1) gallium phosphide is more oxidation resistant than the III-V aluminum compounds, (2) a range of energy band gaps higher than 1.75 eV is readily available for system efficiency optimization, (3) reliable ohmic contact technology is available from the light-emitting diode industry, and (4) the system readily lends itself to graded band gap structures for additional increases in efficiency

Violation of Leggett inequalities in orbital angular momentum subspaces

We report an experimental test of Leggett's non-local hidden variable theory in an orbital angular momentum (OAM) state space of light. We show that the correlations we observe are in conflict with Leggett's model, thus excluding a particular class of non-local hidden variable theories for the first time in a non-polarization state space. It is known that the violation of the Leggett inequality becomes stronger as more detection settings are used. The required measurements become feasible in an OAM subspace, and we demonstrate this by testing the inequality using three and four settings. We observe excellent agreement with quantum predictions and a violation of five and six standard deviations, respectively, compared to Leggett's non-local hidden variable theory

The role of freestream turbulence scale in subsonic flow separation

The ojective of this work is the clarification of the role of freestream turbulence scale in determining the location of boundary layer separation. An airfoil in subsonic wind tunnel flow is the specific case studied. Hot-film and hot-wire anemometry, liquid-film visualization and pressure measurements are the principal diagnostic techniques in use. The Vanderbilt University subsonic wind tunnel is the flow facility being used

Minimum-error discrimination between three mirror-symmetric states

We present the optimal measurement strategy for distinguishing between three quantum states exhibiting a mirror symmetry. The three states live in a two-dimensional Hilbert space, and are thus overcomplete. By mirror symmetry we understand that the transformation {|+> -> |+>, |-> -> -|->} leaves the set of states invariant. The obtained measurement strategy minimizes the error probability. An experimental realization for polarized photons, realizable with current technology, is suggested.Comment: 4 pages, 2 figure

AlGaAs top solar cell for mechanical attachment in a multi-junction tandem concentrator solar cell stack

The AstroPower self-supporting, transparent AlGaAs top solar cell can be stacked upon any well-developed bottom solar cell for improved system performance. This is an approach to improve the performance and scale of space photovoltaic power systems. Mechanically stacked tandem solar cell concentrator systems based on the AlGaAs top concentrator solar cell can provide near term efficiencies of 36 percent (AMO, 100x). Possible tandem stack efficiencies greater than 38 percent (100x, AMO) are feasible with a careful selection of materials. In a three solar cell stack, system efficiencies exceed 41 percent (100x, AMO). These device results demonstrate a practical solution for a state-of-the-art top solar cell for attachment to an existing, well-developed solar cell

The simplest demonstrations of quantum nonlocality

We investigate the complexity cost of demonstrating the key types of nonclassical correlations-Bell inequality violation, Einstein, Podolsky, Rosen (EPR)-steering, and entanglement-with independent agents, theoretically and in a photonic experiment. We show that the complexity cost exhibits a hierarchy among these three tasks, mirroring the recently discovered hierarchy for how robust they are to noise. For Bell inequality violations, the simplest test is the well-known Clauser-Horne-Shimony-Holt test, but for EPR-steering and entanglement the tests that involve the fewest number of detection patterns require nonprojective measurements. The simplest EPR-steering test requires a choice of projective measurement for one agent and a single nonprojective measurement for the other, while the simplest entanglement test uses just a single nonprojective measurement for each agent. In both of these cases, we derive our inequalities using the concept of circular two-designs. This leads to the interesting feature that in our photonic demonstrations, the correlation of interest is independent of the angle between the linear polarizers used by the two parties, which thus require no alignment

The role of freestream turbulence scale in subsonic flow separation

The clarification of the role of freestream turbulence scale in determining the location of boundary layer separation is discussed. Modifications to the test facility were completed. Wind tunnel flow characteristics, including turbulence parameters, were determined with two turbulence generating grids, as well as no grid. These results are summarized. Initial results on the role of scale on turbulent boundary layer separation on the upper surface of an airfoil model are also discussed