Dusty plasma cavities: probe-induced and natural

A comprehensive exploration of regional dust evacuation in complex plasma crystals is presented. Voids created in 3D crystals on the International Space Station have provided a rich foundation for experiments, but cavities in dust crystals formed in ground-based experiments have not received as much attention. Inside a modified GEC RF cell, a powered vertical probe was used to clear the central area of a dust crystal, producing a cavity with high cylindrical symmetry. Cavities generated by three mechanisms are examined. First, repulsion of micrometer-sized particles by a negatively charged probe is investigated. A model of this effect developed for a DC plasma is modified and applied to explain new experimental data in RF plasma. Second, the formation of natural cavities is surveyed; a radial ion drag proposed to occur due to a curved sheath is considered in conjunction with thermophoresis and a flattened confinement potential above the center of the electrode. Finally, cavity formation unexpectedly occurs upon increasing the probe potential above the plasma floating potential. The cavities produced by these methods appear similar, but each are shown to be facilitated by fundamentally different processes.Comment: 10 pages, 12 figure

Selection bias in the M_BH-sigma and M_BH-L correlations and its consequences

It is common to estimate black hole abundances by using a measured correlation between black hole mass and another more easily measured observable such as the velocity dispersion or luminosity of the surrounding bulge. The correlation is used to transform the distribution of the observable into an estimate of the distribution of black hole masses. However, different observables provide different estimates: the Mbh-sigma relation predicts fewer massive black holes than does the Mbh-L relation. This is because the sigma-L relation in black hole samples currently available is inconsistent with that in the SDSS sample, from which the distributions of L or sigma are based: the black hole samples have smaller L for a given sigma or have larger sigma for a given L. This is true whether L is estimated in the optical or in the NIR. If this is a selection rather than physical effect, then the Mbh-sigma and Mbh-L relations currently in the literature are also biased from their true values. We provide a framework for describing the effect of this bias. We then combine it with a model of the bias to make an estimate of the true intrinsic relations. While we do not claim to have understood the source of the bias, our simple model is able to reproduce the observed trends. If we have correctly modeled the selection effect, then our analysis suggests that the bias in the relation is likely to be small, whereas the relation is biased towards predicting more massive black holes for a given luminosity. In addition, it is likely that the Mbh-L relation is entirely a consequence of more fundamental relations between Mbh and sigma, and between sigma and L. The intrinsic relation we find suggests that at fixed luminosity, older galaxies tend to host more massive black holes.Comment: 12 pages, 7 figures. Accepted by ApJ. We have added a figure showing that a similar bias is also seen in the K-band. A new appendix describes the BH samples as well as the fits used in the main tex

Measurement of net electric charge and dipole moment of dust aggregates in a complex plasma

Understanding the agglomeration of dust particles in complex plasmas requires a knowledge of the basic properties such as the net electrostatic charge and dipole moment of the dust. In this study, dust aggregates are formed from gold coated mono-disperse spherical melamine-formaldehyde monomers in a radio-frequency (rf) argon discharge plasma. The behavior of observed dust aggregates is analyzed both by studying the particle trajectories and by employing computer models examining 3D structures of aggregates and their interactions and rotations as induced by torques arising from their dipole moments. These allow the basic characteristics of the dust aggregates, such as the electrostatic charge and dipole moment, to be determined. It is shown that the experimental results support the predicted values from computer models for aggregates in these environments.Comment: 6 pages, 7 figure

Separation of Parallel Encoded Complex-Valued Slices (SPECS) From A Single Complex-Valued Aliased Coil Image

Purpose Achieving a reduction in scan time with minimal inter-slice signal leakage is one of the significant obstacles in parallel MR imaging. In fMRI, multiband-imaging techniques accelerate data acquisition by simultaneously magnetizing the spatial frequency spectrum of multiple slices. The SPECS model eliminates the consequential inter-slice signal leakage from the slice unaliasing, while maintaining an optimal reduction in scan time and activation statistics in fMRI studies. Materials and Methods When the combined k-space array is inverse Fourier reconstructed, the resulting aliased image is separated into the un-aliased slices through a least squares estimator. Without the additional spatial information from a phased array of receiver coils, slice separation in SPECS is accomplished with acquired aliased images in shifted FOV aliasing pattern, and a bootstrapping approach of incorporating reference calibration images in an orthogonal Hadamard pattern. Result The aliased slices are effectively separated with minimal expense to the spatial and temporal resolution. Functional activation is observed in the motor cortex, as the number of aliased slices is increased, in a bilateral finger tapping fMRI experiment. Conclusion The SPECS model incorporates calibration reference images together with coefficients of orthogonal polynomials into an un-aliasing estimator to achieve separated images, with virtually no residual artifacts and functional activation detection in separated images

Predicting morphotropic phase boundary locations and transition temperatures in Pb- and Bi-based perovskite solid solutions from crystal chemical data and first-principles calculations

Using data obtained from first-principles calculations, we show that the position of the morphotropic phase boundary (MPB) and transition temperature at MPB in ferroelectric perovskite solutions can be predicted with quantitative accuracy from the properties of the constituent cations. We find that the mole fraction of PbTiO$_3$ at MPB in Pb(B$'$B$''$)O$_3$-PbTiO$_3$, BiBO$_3$-PbTiO$_3$ and Bi(B$'$B$''$)O$_3$-PbTiO$_3$ exhibits a linear dependence on the ionic size (tolerance factor) and the ionic displacements of the B-cations as found by density functional theory calculations. This dependence is due to competition between the local repulsion and A-cation displacement alignment interactions. Inclusion of first-principles displacement data also allows accurate prediction of transiton temperatures at the MPB. The obtained structure-property correlations are used to predict morphotropic phase boundaries and transition temperatures in as yet unsynthesized solid solutions.Comment: Accepted for publication in J. Appl. Phy

Phase Transitions in a Dusty Plasma with Two Distinct Particle Sizes

In semiconductor manufacturing, contamination due to particulates significantly decreases the yield and quality of device fabrication, therefore increasing the cost of production. Dust particle clouds can be found in almost all plasma processing environments including both plasma etching devices and in plasma deposition processes. Dust particles suspended within such plasmas will acquire an electric charge from collisions with free electrons in the plasma. If the ratio of inter-particle potential energy to the average kinetic energy is sufficient, the particles will form either a liquid structure with short range ordering or a crystalline structure with long range ordering. Otherwise, the dust particle system will remain in a gaseous state. Many experiments have been conducted over the past decade on such colloidal plasmas to discover the character of the systems formed, but more work is needed to fully understand these structures. The preponderance of previous experiments used monodisperse spheres to form complex plasma systems

Methods to elicit probability distributions from experts: a systematic review of reported practice in health technology assessment

The final publication is available at Springer via the DOI in this record.BACKGROUND: Elicitation is a technique that can be used to obtain probability distribution from experts about unknown quantities. We conducted a methodology review of reports where probability distributions had been elicited from experts to be used in model-based health technology assessments. METHODS: Databases including MEDLINE, EMBASE and the CRD database were searched from inception to April 2013. Reference lists were checked and citation mapping was also used. Studies describing their approach to the elicitation of probability distributions were included. Data was abstracted on pre-defined aspects of the elicitation technique. Reports were critically appraised on their consideration of the validity, reliability and feasibility of the elicitation exercise. RESULTS: Fourteen articles were included. Across these studies, the most marked features were heterogeneity in elicitation approach and failure to report key aspects of the elicitation method. The most frequently used approaches to elicitation were the histogram technique and the bisection method. Only three papers explicitly considered the validity, reliability and feasibility of the elicitation exercises. CONCLUSION: Judged by the studies identified in the review, reports of expert elicitation are insufficient in detail and this impacts on the perceived usability of expert-elicited probability distributions. In this context, the wider credibility of elicitation will only be improved by better reporting and greater standardisation of approach. Until then, the advantage of eliciting probability distributions from experts may be lost.NIH

A study of intense magnetic fields for high energy forming and structural assembly Interim report

Determination of maximum force on static sheet of aluminum subjected to magnetic field of hammer coi

Three new species of Pyricularia are isolated as Zingiberaceous endophytes from Thailand

A new taxon with Dyrithium-like characteristics was collected from Lake Fuxian in China. The taxon is typical of the Amphisphaeriaceae in that it has relatively large, ostiolate, immersed ascomata, unitunicate asci with a J+ subapical ring, and brown ascospores. It is similar to Dyrithium in that it has muriform ascospores, but considerable confusion surrounds this genus. In Dyrithium asci are bitunicate and lack a J+ subapical ring, while this was not true of our species. A new genus, Dyrithiopsis, therefore is established to accommodate this new taxon. Details of its anamorph also are provided, based on cultural studies. Parsimony analyses of part of the large-subunit rDNA provide further evidence to support the familial placement of this new genus in the Amphisphaeriaceae. The taxonomic position of Dyrithium also is discussed.published_or_final_versio